Our Brands

Interconnects

82 - 96
90 91 92 93 94 95 96 97 98 99 100 101 102 103 104
98 - 112
Newest Items First
15 Per Page
920-ADA SMA Jack to RP-SMA Plug RF Adapter
920-ADA SMA Jack to RP-SMA Plug RF Adapter
US$6.03
This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with an SMA jack on one end and an RP-SMA Plug on the other.
In stock
+ −
Add to wish list
919-ADA RP-SMA Jack to SMA Plug RF Adapter
919-ADA RP-SMA Jack to SMA Plug RF Adapter
US$6.03
This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with a RP-SMA jack on one end and an SMA Plug on the other.
In stock
+ −
Add to wish list
SJ002B Keystone Dual Surface Box
SJ002B Keystone Dual Surface Box
US$4.89
This is a dual surface box with a sticky adhesive and screw mounting for keystone category 5E modular connection. 
In stock
+ −
Add to wish list
COM-11707 Barrel Jack Extension Cable - M-F (6 ft)
COM-11707 Barrel Jack Extension Cable - M-F (6 ft)
US$2.73
This cable is terminated with 5.5x2.1mm barrel connectors, one male and one female, and fits most of our products that use a DC barrel jack for power (RedBoard, RaspiRobot board, etc.).
In stock
+ −
Add to wish list
1283 SMT Test Socket - SOIC-16 Narrow Breakout
1283 SMT Test Socket - SOIC-16 Narrow Breakout
US$38.42
Yeah, that's right, now you can program and test out your favorite new parts in SOIC-16 or smaller packages. This test socket is good for any SOIC/SOP "Narrow" chip in a 150mil wide body that has 16 pins or fewer. Simply press down on the top, place the chip in carefully and then release to latch the chip in.
In stock
+ −
Add to wish list
1281 SMT Test Socket - SOIC-28 Wide Breakout
1281 SMT Test Socket - SOIC-28 Wide Breakout
US$52.42
Yeah, that's right, now you can program and test out your favorite new parts in SOIC Wide packages. This test sockets is good for any wide (300 mil) SOIC/SOP with up to 28 pins. Simply open the latch, place the chip in carefully and then close the top over it. The chip is held securely against gold 'fingers' in the socket.
In stock
+ −
Add to wish list
394 Pogo Pins (10 pack) - P75-LM3
394 Pogo Pins (10 pack) - P75-LM3
US$13.13
These particular pins are (in our opinion) ideal because they are skinny enough to fit into proto board or perf board - they have a 1.0mm/0.04" diameter body (the gold part) but the spring contact head is 1.5mm (0.06") wide. The uncompressed length is 16.5mm/0.65", compressed is 14mm/0.55"
Delivery within 2-3 weeks
+ −
Add to wish list
725 Terminal Block - 3-pin 3.5mm - pack of 5!
725 Terminal Block - 3-pin 3.5mm - pack of 5!
US$6.92
These particular 3.5mm terminal blocks are our favorite: big enough for a range of wire gauges, easy to adjust with a screwdriver, and not too chunky. The only down-side is that they do not fit into 2.5mm spaced holes (they're 3.5mm spaced) - but they do fit in most perf/proto-board if you rotate them diagonally.
In stock
+ −
Add to wish list
373 Breadboard-friendly 2.1mm DC barrel jack
373 Breadboard-friendly 2.1mm DC barrel jack
US$1.67
This power jack is designed to fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project. We went for the more expensive "thin pin" type which snap into breadboards or perfboards.
In stock
+ −
Add to wish list
610 Panel Mount 2.1mm DC barrel jack
610 Panel Mount 2.1mm DC barrel jack
US$5.17
This power jack is designed to easily attach to a panel up to 8mm thick (0.315" or 5/16") and fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project enclosure.
In stock
+ −
Add to wish list
724 Terminal Block - 2-pin 3.5mm - pack of 5!
724 Terminal Block - 2-pin 3.5mm - pack of 5!
US$5.17
These particular 3.5mm terminal blocks are our favorite: big enough for a range of wire gauges, easy to adjust with a screwdriver, and not too chunky. The only down-side is that they do not fit into 2.5mm spaced holes (they're 3.5mm spaced) - but they do fit in most perf/proto-board if you rotate them diagonally.
In stock
+ −
Add to wish list
806 3x8 Male Header - 4 pack
806 3x8 Male Header - 4 pack
US$5.17
Three rows!? Yes! These chunks of 0.1" header has yet-another-row - handy for when you want to connect cables that come in sets of three, like perhaps sensors, or servos. These plug into any standard 0.1" spacing perf-boards or other PCBs and work nicely with our female-ended wire sets.
In stock
+ −
Add to wish list
816 3x4 Right Angle Male Header - 4 pack
816 3x4 Right Angle Male Header - 4 pack
US$5.17
Three rows in a right angle header!? Yes! These chunks of 0.1" header has yet-another-row - handy for when you want to connect cables that come in sets of three, like perhaps sensors, or servos. These plug into any standard 0.1" spacing perf-boards or other PCBs and work nicely with our female-ended wire sets.
In stock
+ −
Add to wish list
804 PS/2 Wired Connector - Panel Mount MiniDIN-6
804 PS/2 Wired Connector - Panel Mount MiniDIN-6
US$12.47
This connector is sturdy and easy to panel mount, and has pre-soldered wires connected to the 6 contacts (of which 4 are used).
Delivery within 2-3 weeks
+ −
Add to wish list
383 40-pin ZIF socket
383 40-pin ZIF socket
US$7.00
This socket is designed for DIP chips of up to 40 pins and up to 0.6" wide. So really, its good for any size chip you'll find. What's nice about it is it can snap into an existing circuit board or socket that is designed for a 40-pin 0.6" chip so you may not have to redesign the board! This socket is gold plated so it will last a long time.
Delivery within 2-3 weeks
+ −
Add to wish list
82 - 96
90 91 92 93 94 95 96 97 98 99 100 101 102 103 104
98 - 112