Our Brands

Connectors/ Adapters

1 - 11
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
13 - 27
Newest Items First
64 Per Page
SH-3BL 2 rows x 40 pins Straight Male Snappable Header - Blue
US$1.39

These are male snappable header used for soldering onto PC boards for instant connections.

In stock
+ −
Add to wish list
SH-3RD 2 rows x 40 pins Straight Male Snappable Header - Red
US$1.39

These are male snappable header used for soldering onto PC boards for instant connections.

In stock
+ −
Add to wish list
SH-3Y 2 rows x 40 pins Straight Male Snappable Header - Yellow
US$1.39

These are male snappable header used for soldering onto PC boards for instant connections.

In stock
+ −
Add to wish list
SH-3WH 2 rows x 40 pins Straight Male Snappable Header - White
US$1.39

These are male snappable header used for soldering onto PC boards for instant connections.

In stock
+ −
Add to wish list
CON-530 1.3mm DC Power Plug
US$0.98

This DC power plug has a 1.3mm ID and 3.5mm OD. Used widely for laptop adapter plugs.

In stock
+ −
Add to wish list
CON-JST-XH-4A JST-XH Four-Pin Female Connector Plug with 10cm Cable 2.54mm Pitch
US$1.10

Ce connecteur de câble de silicium 16 AWG est couramment utilisé dans les ports de charge d'équilibrage de batterie Li-Po, les imprimantes 3D, les machines CNC et certains capteurs et autres appareils.


Pas: 2.5mm ou 2.54mm

In stock
+ −
Add to wish list
CON-JST-XH-2A JST-XH Two-Pin Female Connector Plug with 100mm Cable 2.54mm Pitch
US$0.99

This 16 AWG Silicon Cable connector is commonly used in Li-Po Battery Balance Charging ports, 3D printers, CNC machines and some sensors and other devices.

Pitch: 2.5mm or 2.54mm

In stock
+ −
Add to wish list
PP-135 Female DC Barrel Jack 5.5x2.1mm with wire 15cm
US$0.99
This is a female DC Barrel jack adapter that fits any male DC barrel jack that is designed for 2.1mm and comes in a sleeved rubber coating up to 15cm for a professional look. The end of the cable has two wires for easy access to solder onto any board or cable.
In stock
+ −
Add to wish list
PP-130 Male DC Barrel Jack 5.5x2.1mm with wire 15cm
US$0.99

This is a simple DC Barrel jack that fits any socket that is designed for 2.1mm and comes in a sleeved rubber coating up to 15cm for a professional look. The end of the cable has two wires for easy access to solder onto any board or cable.

In stock
+ −
Add to wish list
CON-JST-XH-3A JST-XH 3 Pin Female Connector Plug with 10cm Cable 2.54mm Pitch
US$1.05
This 22 AWG Silicon Cable connector is commonly used in Li-Po Battery Balance Charging ports, 3D printers, CNC machines and some sensors and devices. Pitch: 2.5mm.
In stock
+ −
Add to wish list
CON-300 2.5mm Plug to 3.5mm Jack Stereo Plug-TRRS
US$2.51
This is a high quality connector that allows you to adapt a 3.5mm audio jack into a 2.5mm audio socket. Sold by the unit.
In stock
+ −
Add to wish list
CON-GX16-2 Male and Female GX16-2 Pin 16mm Connector Kit
US$2.79
This kit provides a secure 2 pin connector set with matched chassis mount jack and screw lock plug for general purpose use. This connector system is widely used in electronics for aviation microphones, navigation, computers, communication, transportation, machinery and alarms.
In stock
+ −
Add to wish list
BAT-CAB-20 Male & Female JST RCY Connectors with 100MM Cables
US$1.39
This is a male and female JST connectors set with 100mm long power cable on each end. They are also known as RCY Connectors. They are great to be used in DIY projects and RC cars, drones, boats etc.
In stock
+ −
Add to wish list
COM-14567 USB to Micro-B Adapter
US$3.28
It’s tiny, it’s handy, and it can give your normal USB-equipped device a micro-B connector! With the USB to Micro-B Adapter you can make a flash drive connect to your tablet, connect a keyboard to your phone in order to text with ease, attach a Bluetooth® dongle to your RPi Zero, and more! Since this adapter is super small, it is very easy to transport anywhere you might need it — making it extremely convenient to have in a pinch. Installation of the USB to Micro-B Adapter is easy; simply slide it into a USB A connector, and you will instantly make that device micro-B capable!
In stock
+ −
Add to wish list
MUSBA11130 USB Connector Receptacle Type A Panel mount 90°
US$12.95
This device is a USB type A receptacle panel mount connector 90°. Number of Contacts: 4 Contact. Number of Ports: 1 Port. Current Rating: 1.5A. Termination Style: Solder Tail. Voltage rating: 100V.
In stock
+ −
Add to wish list
MUSB-D111-30 USB Connector Rugged Receptacle Type B Right Angle
US$10.95
This device is a rugged USB type B receptacle connector 90°. Number of Contacts: 4 Contact. Number of Ports: 1 Port. Current Rating: 1.5A. Termination Style: Solder Tail.
In stock
+ −
Add to wish list
SH-6AS, 1 Row x 40 Pin Male Snappable Header/Spacer Double
US$1.39
This male header is designed as a spacer to lift a daughter board over large components on a mother board. This spacer provides a 21mm clearance above the plane of the mother board. Has 3mm long motherboard solder pins and 5.5 mm long daughter board connector pins. This single row by 40 pin header/spacer snaps apart to fit your application.
In stock
+ −
Add to wish list
PP-120 DC power supply breakout board 2.1mm Jack 2A
US$1.39
This device is a DC power supply breakout board with a 2.1mm jack on the connector. PCB Size: 2.8 X 1.3cm. Power output interface: 2 way VCC and GROUND.
In stock
+ −
Add to wish list
BB-USBAF-5P USB Female Adapter to 5 Pin Screw Connector
US$4.61
This female adapter provides a convenient breakout for USB cables to a five pin screw terminal. Provides access to the 5 volt, ground and data lines.
In stock
+ −
Add to wish list
BB-USBAM-5P USB Male Adapter to 5 Pin Screw Connector
US$4.39
This adapter provides a convenient breakout for USB computer ports to a five pin screw terminal. Provides access to the 5 volt, ground and data lines.
In stock
+ −
Add to wish list
CON-KIT-003 DuPont Connector Housing Kit 620pcs
US$20.93
This practical connector kit comes with the most common DuPont pin housings with male and female crimp pins. These work great with all your typical Arduino and breadboard style pin connectors and sockets. With a nice plastic organizer box makes it easier to pick the types you want to use. Headers: 50pcs 1x1, 40pcs 1x2, 20pcs 1x3, 20pcs 1x4, 20pcs 1x5, 20pcs 1x6 10pcs 2x2, 10pcs 2x3, 10pcs 2x4, 10pcs 2x5, 10pcs 2x6. Pins: 200pcs Female Crimp Pins, 200pcs Male Crimp Pins.
In stock
+ −
Add to wish list
D-CON-30 XT30 Connectors – Male/Female Pair
US$1.99
These connectors are made from high-temp nylon with gold-plated spring pins or sockets molded in. The shape of the XT30 prevents reverse polarity, and when plugged in the connection is super-solid. Perfect for applications up to and beyond 65A continuous draw. Sold in pairs of 1 male and 1 female connector.
In stock
+ −
Add to wish list
CON-GX16-3 Male and Female GX16-3 Pin 16mm Connector Kit
US$3.25
This kit provides a secure 3 pin connector set with matched chassis mount jack and screw lock plug for general purpose use. This connector system is widely used in electronics for aviation microphones, navigation, computers, communication, transportation, machinery and alarms.
Delivery within 2-3 weeks
+ −
Add to wish list
CON-GX16-4 Male and Female GX16-4 Pin 16mm Connector Kit
US$3.25
This kit provides a secure 4 pin connector set with matched chassis mount jack and screw lock plug for general purpose use. This connector system is widely used in electronics for aviation microphones, navigation, computers, communication, transportation, machinery and alarms.
In stock
+ −
Add to wish list
D-CON-16 XT90 Connectors Male/Female pair
US$4.98

These connectors allow for convenient wiring between your Lipo batteries and ESCs (or Power supply circuit) in any of your RC applications. The XT90 in particular can draw exceptionally high currents compared to his XT60 and XT30 counterparts. The design of the XT connector series ensures reverse polarity protection and thanks to its nylon material, you needn’t worry about overheating during soldering. This connector is a great pick for circuits that draw 90A of continuous current. 

In stock
+ −
Add to wish list
AB-4930 2.5mm Audio Jack (normally closed)
US$0.99
2.5mm Audio Jack (normally closed)
In stock
+ −
Add to wish list
CON-510 5,5 x 2,1 mm DC Barrel Jack Plug - Male
US$0.88
This male barrel jack plug is great for adding a common connector to the end of wires. This jack is compatible with 5.5x2.1mm barrel connectors. The outer shell unscrews to reveal solder terminals and a crimp strain relief. The outer shell has strain relief as well. Great for anyone looking to supply DC voltage to their project.
In stock
+ −
Add to wish list
CON-WP-03 MC4 Solar Deck Panel Junction Connectors (1pair)
US$3.99
Looking to connect your solar deck panels in series or parallel? Need a MC4 extension cable? Get these MC4 connectors and crimp your wires to comply to MC4 standards. Most solar panels these days are MC4 compliant. If you’re planning on building your own string of panels, you’ll most certainly need MC4 connectors to do so. Not only do they have very good anti-aging and anti-UV properties but their IP67 certification guarantees their water-proof and dust proof capabilities. Their copper covered contact material also ensure excellent electrical conductance and their simple design allows for fast and convenient assembly.
In stock
+ −
Add to wish list
CON-WP-01 MC4-T Multi Branch Solar Deck Panel Connectors
US$6.99
Looking to connect your solar deck panels in series or parallel? Most solar panels these days are MC4 compliant. If you’re planning on building your own string of panels, you’ll most certainly need MC4 compatible multibranch connectors to do so. Not only do they have very good anti-aging and anti-UV properties but their IP67 certification guarantees their water-proof and dust proof capabilities. Their copper covered contact material also ensure excellent electrical conductance and their simple design allows for fast and convenient assembly. These connectors in particular allow for easier installation of parallel panels.
In stock
+ −
Add to wish list
CON-GX16-5 Male and Female GX16-5 Pin 16mm Connector Kit
US$3.25
This kit provides a secure 5 pin connector set with matched chassis mount jack and screw lock plug for general purpose use. This connector system is widely used in electronics for aviation microphones, navigation, computers, communication, transportation, machinery and alarms.
In stock
+ −
Add to wish list
CON-GX16-6 GX16-6 Pin 16mm Male and Female Connector Kit
US$3.29
This kit provides a secure 6 pin connector set with matched chassis mount jack and screw lock plug for general purpose use. This connector system is widely used in electronics for aviation microphones, navigation, computers, communication, transportation, machinery and alarms.
In stock
+ −
Add to wish list
CON-GX16-7 GX16-7 Pin 16mm Male and Female Connector Kit
US$3.35
This kit provides a secure 7 pin connector set with matched chassis mount jack and screw lock plug for general purpose use. This connector system is widely used in electronics for aviation microphones, navigation, computers, communication, transportation, machinery and alarms.
In stock
+ −
Add to wish list
CON-GX16-8 GX16-8 Pin 16mm Male and Female Connector Kit
US$3.39
This kit provides a secure 8 pin audio connector set with matched chassis mount jack and screw lock plug for general purpose use. This connector system is widely used in electronics for aviation microphones, navigation, computers, communication, transportation, machinery and alarms.
In stock
+ −
Add to wish list
CON-GX16-9 GX16-9 Pin 16mm Male and Female Connector Kit
US$3.49
This kit provides a secure 9 pin connector set with matched chassis mount jack and screw lock plug for general purpose use. This connector system is widely used in electronics for aviation microphones, navigation, computers, communication, transportation, machinery and alarms.
In stock
+ −
Add to wish list
CON-GX16-10 GX16-10 Pin 16mm Male and Female Connector Kit
US$3.99
This kit provides a secure 10 pin connector set with matched chassis mount jack and screw lock plug for general purpose use. This connector system is widely used in electronics for aviation microphones, navigation, computers, communication, transportation, machinery and alarms.
In stock
+ −
Add to wish list
3-641534-3-10 Connector Receptacle 3 Position MTA100 (pack of 10)
US$1.99
MTA100 series 3 Position Rectangular Receptacle Connector IDC Tin 22 AWG . Price per pack of 10.
In stock
+ −
Add to wish list
CE100F22-2-1 Connector Receptacle 2 Position IDC
US$1.99
Pancon series 2 Position wire to board connector IDC Tin 22 AWG. Pitch: 2.54mm. Price per pack of 10.
In stock
+ −
Add to wish list
3-641534-2 Receptacle, Connector free-hanging, 2.54 mm, 2 Contacts, MTA-100 Series, package of 10
US$2.20
3-641534-2 Connector free-hanging, 2.54 mm, 2 Contacts, Receptacle, MTA-100 Series,   package of 10
In stock
+ −
Add to wish list
CE100F22-3-D Connector wire to PCB, 2.54 mm, 3 Contacts, Receptacle, MTA-100 Series, 1 Row
US$0.49
CE100F22-3-D Connector wire to PCB, 2.54 mm, 3 Contacts, Receptacle, MTA-100 Series, 1 Row
In stock
+ −
Add to wish list
CF100F22-2.1 Header receptacle, wire to PCB, 2.54 mm, 2 Contacts, MTA-100 Series, 1 Row
US$0.27
CF100F22-2.1 Header receptacle, wire to PCB, 2.54 mm, 2 Contacts, MTA-100 Series, 1 Row
Delivery within 2-3 weeks
+ −
Add to wish list
A32274 Connector BNC Female 50 Ohm 4 GHz 90°
US$3.99
A32274 Connector BNC Female 50 Ohm 4 GHz 90°  
In stock
+ −
Add to wish list
CON-KIT-001 2/3/4/5Pin JST-XH 2.54mm Pitch Terminal Housing Header Connector Kit
US$10.95
This handy JST-XH connector kit provides a popular set of connectors for the DIY hobbyist. Includes 10 sets of 2, 3, 4, and 5 position male headers and matching female plugs with crimp pins in a handy organizer box. Total of 150 pieces.
In stock
+ −
Add to wish list
CON-KIT-002 520 Piece Jumper Wire Header Connector Kit
US$27.93
This versatile jumper wire kit allows the DIY hobbyist to make male to male, male to female and female to female jumper wires for Arduino and Raspberry Pi projects. Includes male and female pins and single row female housings for 1, 2, 3, 4, 5, 6, 8 and 10 pins and double row female housings for 6, 8, 10, 12, 14, and 16 pins. Includes single row and double row male headers. Also includes three feet of 10 conductor flat rainbow cable. An organizer box keeps all parts in order and easy to find.
In stock
+ −
Add to wish list
BB-AV-3.5-M-3 3.5mm STEREO PLUG TO 3P SCREW TERMINAL
US$3.25
Max. voltage: 12V. Max. current: 4A. Max. operating temperature: 30°C (86°F).
In stock
+ −
Add to wish list
BB-DC-2.5-M-R, DC PLUG 5.5x2.5mm Male to Screw Terminal
US$2.19
Male to removable screw. Specifications: Max. voltage: 25V. Max. current: 4A. Max. operating temperature: 30°C (86°F).
Delivery within 2-3 weeks
+ −
Add to wish list
BB-AV-3.5-M-4 3.5mm STEREO PLUG TO 4P SCREW TERMINAL
US$3.25
Max. voltage: 12V. Max. current: 1A. Max. operating temperature: 30°C (86°F). Price per 1 unit.
In stock
+ −
Add to wish list
53047-0410 Header Shrouded, 1x4 pos. male vertical Pitch 1.25mm
US$0.67
53047-0410 Header shrouded, 1x4 pos. male vertical Pitch 1.25mm
Delivery within 2-3 weeks
+ −
Add to wish list
52045-0745 FFC/FPC Connector Female 7 POS. 1.25mm Solder Vertical
US$0.28
52045-0745 FFC/FPC Connector Female 7 POS. 1.25mm Solder Vertical
In stock
+ −
Add to wish list
NC7MX-B XLR Connector Solder Cup Male Cable Mount 7 Terminal 1 Port
US$11.38
NC7MX-B XLR Connector Solder Cup Male Cable Mount 7 Terminal 1 Port
In stock
+ −
Add to wish list
NC7FX-B XLR Connector Solder Cup Female Cable Mount 7 Terminal 1 Port
US$16.98
NC7FX-B XLR Connector Solder Cup Female Cable Mount 7 Terminal 1 Port
In stock
+ −
Add to wish list
NC5FX-B XLR Connector Solder Cup Male Cable Mount 5 Terminal 1 Port
US$11.61
NC5FX-B XLR Connector Solder Cup Male Cable Mount 5 Terminal 1 Port
In stock
+ −
Add to wish list
NC4MX XLR Neutrik Connector 4 Position Male Solder Cup ST Cable Mount
US$5.53
NC4MX XLR Neutrik Connector 4 Position Male Solder Cup ST Cable Mount
In stock
+ −
Add to wish list
NC3MP XLR Connector 3 Position Male Solder Cup ST Panel Mount 1 Port
US$6.32
NC3MP XLR Connector 3 Position Male Solder Cup ST Panel Mount 1 Port
In stock
+ −
Add to wish list
NC3MC XLR Connector 3 Position Male Solder Cup ST Cable Mount
US$4.83
NC3MC XLR Connector 3 Position Male Solder Cup ST Cable Mount
In stock
+ −
Add to wish list
NC3FZ XLR Connector 3 Position Female Chassis Non Latching
US$11.19
NC3FZ XLR Connector 3 Position Female Chassis Non Latching
In stock
+ −
Add to wish list
NC3FX XLR Connector Female Solder Cable Mount 3 Positions 1 Port
US$4.45
NC3FX XLR Connector Female Solder Cable Mount 3 Positions 1 Port
In stock
+ −
Add to wish list
NJ5FD-V XLR Connector ¼” Female Stereo 3 Terminal Solder Thru-Hole 1 Port
US$1.30
NJ5FD-V XLR Connector ¼” Female Stereo 3 Terminal Solder Thru-Hole 1 Port
In stock
+ −
Add to wish list
NJ3FD-V XLR Connector ¼” Stereo Female 3 Terminal Thru-Hole 1 Port
US$1.40
NJ3FD-V XLR Connector ¼” Stereo Female 3 Terminal Thru-Hole 1 Port
In stock
+ −
Add to wish list
NC7FP-1 XLR Connector Solder Cup Female Panel Mount 7 Terminal 1 Port
US$18.35
NC7FP-1 XLR Connector Solder Cup Female Panel Mount 7 Terminal 1  Port
In stock
+ −
Add to wish list
53047-0410 Header boxed, 1x4 pos. male vertical Pitch 1.25mm
US$0.67
53047-0410 Header boxed, 1x4 pos. male vertical Pitch 1.25mm
In stock
+ −
Add to wish list
BAT-CON-13 5 Pairs of Male/Female XT60 Connectors & Heat-Shrink
US$11.89
This is a unique pack that provides 5 pairs of Male and Female XT60 Connectors. It also comes with some heat shrink to protect your solder joints from accidental shortage. This pack is recommended for people who want to purchase in bulk. These connectors are made from high-temp nylon with gold-plated spring pins or sockets molded in. The shape of the XT60 prevents reverse polarity, and when plugged in the connection is super-solid. Perfect for applications up to and beyond 65A continuous draw. Sold in pairs of 1 male and 1 female connector.
In stock
+ −
Add to wish list
3366-ADA 36-pin Stacking header - pack of 5!
US$9.95
Stacking headers are a twist on the standard/common male and female header sets. In this case you have one header that has a socket on one end, and a long tail that gets soldered through a PCB. When soldered into a through-hole pad, the long tails can plug into another board's female headers while the sockets above the PCB allow another board to be plugged in. This means you can stack PCBs, as many as you like, on top of each other. You can even plug the lower board into a solderless breadboard, or plug wires into the top board's sockets.
Delivery within 2-3 weeks
+ −
Add to wish list
GX12-6 Pin 12mm Male and Female Connector Kit
US$4.19
This is a 9mm wide 6 pin female plug with a 5mm diameter clamp at the other end for strain relief and a male chassis jack with washers for panel mounting. One end has a 9mm 6 pin female plug that features a washer and at the end features a clamp for strain relief. Turn the black female socket anti-clockwise and use a small Philips screwdriver to loosen the clamps.
In stock
+ −
Add to wish list
2109-JAM 2.1mm Female Right-Angle DC Power Plug
US$1.25
Plug Size: 2.1mm Inner Diameter x 5.5mm Outer Diameter x 12mm Length. Features: Strain Relief: 2.8mm Inner Diameter x 11mm Length. Contact Material: Nickel-plated Brass.
Delivery within 2-3 weeks
+ −
Add to wish list
1 - 11
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
13 - 27