2989-POLOLU, TB67S581FNG Stepper Motor Driver Carrier (Soldered Header Pins)
This version of our TB67S581FNG Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard.
Specifications:
Dimensions
| Size: | 0.6″ × 0.8″ |
|---|---|
| Weight: | 2.5 g |
General specifications
| Minimum operating voltage: | 8.2 V |
|---|---|
| Maximum operating voltage: | 44 V |
| Continuous current per phase: | 1.5 A1 |
| Maximum current per phase: | 2.2 A2 |
| Minimum logic voltage: | 2.5 V3 |
| Maximum logic voltage: | 5.25 V3 |
| Microstep resolutions: | full, 1/2, 1/4, 1/8, 1/16, and 1/32 |
| Reverse voltage protection? | N |
| Header pins: | soldered |
Identifying markings
| PCB dev codes: | md20b |
|---|---|
| Other PCB markings: | blank white box |
Notes:
- Without a heat sink or forced air flow.
- With sufficient additional cooling.
- This driver works with 2.5 V to 5.25 V logic. It does not take an external logic power supply.
