Solar Power Manager Module (D), Supports 6V~24V Solar Panel and Type-C Power Adapter, 5V/3A Regulated Output (Battery Holder included) (Batteries Are Not Included)
Solar Power Management Module (D)
Recharged From 6V~24V Solar Panel, Or Type-C Power Adapter 5V/3A Regulated Output
Features At A Glance
The Solar Power Management Module (D) is designed for 6V~24V solar panel, it can charge the 3.7V rechargeable Li battery through solar panel or Type-C connector, and provides 5V/3A regulated output (supports multiple protocols such as PD/QC/FCP/PE/SFCP). The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep working with high-efficiency, stability, and safety. It is suited for solar-powered, low-power IoT, and other environmental protection projects.
- Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel
- Supports solar panel / Type-C power adapter for battery charging
- For 6V~24V solar panel, supports self-adaptive input voltage via DC-002 jack or screw terminal, with input anti-reverse protection
- Multi LED indicators, for monitoring the status of solar panel and batteries
- Multi protection circuits: over-charge / over-discharge / overheat / over-current, stable and safe to use
Version Selection
Solar Power Manager (D)
Single module
Solar Power Manager (D) Acce A
Single module + Battery holder
Specification Comparison
 SOLAR POWER MANAGER |
 SOLAR POWER MANAGER (B) |
 SOLAR POWER MANAGER (C) |
 SOLAR POWER MANAGER (D) |
|
|---|---|---|---|---|
| SOLAR IN | 6V ~ 24V (6V by default) | 6V ~ 24V (18V by default) | 6V ~ 24V | |
| RECHARGING | Solar panel, power adapter, USB | |||
| BATTERY | 3.7V 14500 Li-ion battery (NOT included) | 3.7V 10000mAh Li-po battery | 3x 18650 Li-ion battery (NOT included) | |
| USB INPUT | 5V (Micro USB) | 5V (TYPE-C, with PD quick charge support) | ||
| 5V OUTPUT | 5V / 1A (USB OUT, pin header) 3.3V / 1A (pin header) |
5V / 3A (USB-OUT, TYPE-C) | 5V / 3A (TYPE-C, screw terminal) | |
| RECHARGING CUTOFF VOLTAGE | 4.2V ± 1％ | |||
| OVER DISCHARGING PROTECTION VOLTAGE | 2.9V ± 1％ | 3.0V ± 1％ | ||
| SOLAR PANEL RECHARGING EFFICIENCY | ~78% | |||
| USB RECHARGING EFFICIENCY | ~82% | ~93% | ||
| BATTERIES BOOST OUTPUT EFFICIENCY | ~86% | ~90% | ||
| QUIESCENT CURRENT (MAX) | <2mA | |||
| CASE | N/A | Metal case | N/A | |
| OPERATING TEMPERATURE | -40℃ ~ 85℃ | |||
| DIMENSIONS (MM) | 65.2 × 56.2 × 22.9 | 108.0 × 71.0 × 25.2 | 119.0 × 71.0 × 25.2 | 45.0 × 40.0 × 10.1 |
Application Examples
Suitable For Solar-Powered Control System For MCUs / Development Boards Like Raspberry Pi / Jetson Nano / Arduino...
*for reference only, the Raspberry Pi 4B and solar panel are not included
Application Scenarios
Suitable For Mini Solar Road Lamp, Intelligent Agriculture, Or IoT Applications
What's On Board
- Solar panel charging input:
charged by solar panel via DC-002 jack or screw terminal, self-adaptive input voltage - Type-C charging input:
charged by 5V power adapter via Type C connector, or outputs 5V for external device - Power output:
screw terminal: 5V/3A output - Battery interfaces:
for connecting 3.7V rechargeable Li battery via screw terminal or PH2.0 4P connector - SW6106:
USB power management chip, for USB charging and 5V/3A boost output
- CN3791:
solar power management chip, for solar panel charging and buck input - XB8886A
Li battery over-charge / over-discharge protection - Battery capacity indicators
lights up when charging or under load connection, and will turn off after 30s when there is no load connected - Solar panel charging indicators:
Charge: on when solar panel charging
Done: on when the battery is full charged by solar panel
Outline Dimensions
WARNING
