LED-10MNWPCW-24V, COOL WHITE 24VDC 2835SMD Non Addressable Non-Waterproof LED Light Strip (10 Meters, 12mm wide)

LED-10MNWPCW-24V, 24VDC 2835SMD COOL WHITE Non Addressable Non Waterproof LED Light Strip (10 Meters, 12mm wide)

Features:

• Use super brightness LED as light source.
• Flexible and can be fixed on uneven surface, small volume, available in many colors.
• Each three LEDs make a loop and can be cut according to the incising line, without damaging other parts.
• Low power supply, safe for use.
• Long life span 50,000+ hours
• Can be used for illumination around transparent or non-transparent material.
• There is 10M double side adhesive on the back for pasting.
• IP Grade: IP20 - Non-Waterproof

Specifications:

• View angle: 120°
• Working Voltage: 24V DC
• Width: 10mm
• LED Quantity: 120 bead LEDs /M
• Working Current/Meter: 0.5A
• Output power: 12W / Meter
• Storage Temperature: -40°C to 80°C
• Operating Temperature: -25°C to 60°C
• Luminous Flux: 24 Lumens/LED
• Color Temperature: Cool White: 6500K

To get started: 

You will need the following components

• 10m LED 120 LEDs/M Strip (Included)
• Power supply: Wall Adapter 24V 2A - 2.5mm (sold seperately): ABRA#: DC-24V2A
• Female DC power adapter - 2.1 jack to screw terminal block (sold seperately): ABRA#: 368-ADA
• A WS2835 controller, Wireless RF Touch Controller for WS2835 DC24V Water Flow Effect LED Strip (sold seperately): ABRA#: LED-CONT-RF-TC
• Wire stripper (sold seperately)

Connection is easy. The LED strip comes with two bare wires already attached to it. Connect the bare wires to the 368-ADA screw terminal, which in turn connects to our DC-24V2A (24V power supply). See the Connection diagram.

And now, with the pre-programmed Wireless RF Touch Controller for WS2835 DC24V Water Flow Effect LED Strip, from the controller, connect the female JST-SM connector to the male JST-SM connector of the LED Strip on the other end. Once that's complete, you can power on the LED Strip by connecting the power adapter to the power outlet. Also, with the remote included in the package of Wireless RF Touch Controller for WS2835, you can manipulate the LED strip. See diagrams below for visual representation of JST-SM CONNECTION via RF controller and LED Strip. Also, an example of visual connection of the entire set has been provided below for comparsion purposes. Please note that the LED light strip is 10 meters long while this image only shows a part of it.