Polymaker PolyLite™ Silver 1.75mm 1KG PLA Filament
PolyLite™ PLA is a high-quality PLA designed for reliability and ease of printing.
**Reduce your plastic waste by switching to Polymaker PolyLite™ with cardboard spools!**
Polymaker Jam-Free™ Technology increases the heat resistance of the filament itself (not the printed part) to 140˚C.
This prevent any jamming issue due to the hot end heat creep issue.
Heat creep is the process of heat spreading irregularly throughout your hot end, softening the filament before entering the melting chamber and jamming the filament by making it expand in the cold end..
The increase of the filament heat resistance from 60˚C to 140˚C ensures a Jam-Free experience.
(Note the printed part will have the same heat resistance as regular PLA: ~60˚C)
- Printing Temperature: 190˚C - 230˚C
- Bed Temperature: 25˚C - 60˚C
- Printing Speed: 40mm/s - 60mm/s
- Fan: ON
- Retraction Distance: 1mm
- Retraction Speed: 20mm/s
- Retraction Distance: 3mm
- Retraction Speed: 40mm/s
Drying Settings:
55˚C for 6h (Only if the material has absorbed moisture)
How strong is PolyLite™ PLA?
PolyLite™ PLA is based on a high molecular weight PLA from Natureworks, which makes it one of the most rigid PLA material on the market. You can check the Young's modulus and bending strength data of PolyLite™ PLA in its TDS, which represent its rigidity, and compare it with other materials of our portfolio.
- Spool Inner Hole Diameter: 55±1mm
- Spool Diameter: 200±1mm
- Spool Width: 65.6±2mm
- Spool Weight: 140±7g
WARNING
