Our Brands

Metric Hardware Kits

1 2
Newest Items First
32 Per Page
H-KIT-NB-420, M2-M5 Female Thread Brass Knurled Nut Threaded Insert, 420 Pc
US$31.62
H-KIT-NB-420, M2-M5 Female Thread Brass Knurled Nut Threaded Insert, 420 Pc These Knurled Threarded Insert Nuts can be widely used during injection...
In stock
+ −
Add to wish list
SC-ST-HEX-200 Assortment of 200 pcs, 410 Stainless Steel Self-Drilling Hex Screws
US$22.52
Assortment of 200 pcs, 410 Stainless Steel Self-Drilling Hex Screws
In stock
+ −
Add to wish list
H-KIT-RN-205 Kit 205 pcs Stainless Steel Rivet Nuts
US$31.80
H-KIT-RN-205, Kit 205 pcs Stainless Steel Rivet Nuts
In stock
+ −
Add to wish list
H-CAP-145B, 145pcs M4-M12 Black Polypropylene Hex Acorn Nut/Bolt Cap Assortment Kit
US$18.15
145pcs M4-M12 Black Polypropylene Hex Acorn Nut/Bolt Cap Assortment Kit 50pcs Acorn Nut Cover M4 30pcs Acorn Nut Cover M5 20pcs Acorn Nut Cover...
In stock
+ −
Add to wish list
H-KIT-SWNN-150 Assortment M2~M5 White Nylon Hex Screws, Nuts and Washers, 150 pcs.
US$13.60

This is a 150 piece assortment of M2~M5 white nylon hardware: screws, nuts, washers supplied in a reusable plastic case.

In stock
+ −
Add to wish list
H-KIT-ECLIP580, 580Pcs Carbon Steel E-Clip Retaining Clips
US$22.52
An E-ring or ring clip is a type of circlip that's pushed on or off a grooved shaft without the need for a special tool. All circlips are similar to a “C” shape, which allows them to expand as they fit around a shaft or compress as they fit into a hole.
In stock
+ −
Add to wish list
H-KIT-CCLIP480, 480Pcs Carbon Steel C-Clip Retaining Clips
US$27.07
C-clip or snap ring, is a type of retaining ring with open ends that snap into place. They are fasteners that fit into the radial grooves of shafts and holes that are sprung to ensure they remain securely in place.
In stock
+ −
Add to wish list
H-KIT-M-300 Kit 300 PCS Assorted M3~M5 Computer Screws, Standoffs, Gaskets
US$14.33

This is a 300 piece kit of M3 size assorted screws, standoffs and gaskets for PC computers.

In stock
+ −
Add to wish list
TO-SC-G-W1 Repair Kit Glasses, Watches, Assorted Screws, Nuts, Washers, Nose pads, Screwdriver
US$7.23

This repair kit for glasses, jewelry and watches contains an assortment in multiple sets of screws, nuts, washers, and nose pads, with screwdriver, packaged in a pocket size plastic case.

In stock
+ −
Add to wish list
TO-SC-G-W1000 Repair Kit for Eyeglasses, Watches, Screws & Nuts, Caps (M1~M2~M2.5), Stainless
US$9.96
This repair kit for glasses and watches contains an assortment of approximately 1000 pieces of hardware sizes (M1, M2, M2.5) in multiple sets of 50 screws, nuts, washers, and plastic caps, with tweezers and screwdriver, packaged in a pocket size plastic 18 slot divider case.
In stock
+ −
Add to wish list
TO-SC-G-W Screwdriver Repair Tool Kit for Eyeglasses, Watches, Screws & Nuts, Caps (M1~M1.8~M2~M2.5)
US$13.60
This repair kit for glasses and watches contains an assortment of approximately 1000 pieces of hardware sizes (M1, M1.8, M2, M2.5) in multiple sets of 50 screws, nuts, washers, and plastic caps, with tweezers and screwdrivers, packaged in a pocket size plastic 18 slot divider
In stock
+ −
Add to wish list
S-M3-KITDW 300 pcs Nylon M3 Male Female Hex Standoff Spacer, Hex Nuts, Screws, Assortment Kit PCB
US$22.70
  • White nylon, type specification complete, the quality is reliable.
  • Never rust, beautiful, practical, durable and convenient for using.
  • Packed in a plastic box, good for storage and difficult to damage.
  • Nylon has the characteristics of insulativity, non-magnetic,thermal insulation,corrosion resistance and etc.
  • As electronics components, fit for the industries of communication, electroplating, lab device, office equipment, electronics.
In stock
+ −
Add to wish list
S-M2.5-KIT 120 pcs White M2.5 Nylon Hex Nuts/Spacers Kit
US$18.15
This clear plastic case carries various sizes of nylon based white hex spacers and nuts. In total you should have approximately 120 pieces inside the kit. You have standoffs that are female on both ends and female to male threading. All nuts and spacers provided in this kit are designed for M2.5 standards. It a great little kit to carry around when you need some m2.5 related spacers and nuts.
 
In stock
+ −
Add to wish list
H-KIT-ZP-90 Zinc Plated Four Claws Nut Speaker Nut T-Nut Blind Pronged Tee Nut Furniture Hardware
US$18.15
  • These four-pronged T nuts are made from carbon steel and plated with zinc for rust and corrosion protection.
  • These nuts are used to provide a strong, reliable and easy to fit threaded socket in wood and chipboard.
  • Convenient to use, simply tap these nuts into a suitably sized hole and the prongs will hold them in position.
  • These four prongs will stop the T nut from turning when they are inserted and tightened into wood pieces.
  • There are 5 different sizes nuts in this set that comes in a resealable assorted box for easy carry and storage.
In stock
+ −
Add to wish list
H-KIT-NBK-354 Nylon Flat Washers Kit M2 M2.5 M3 M4 M5 M6 M8
US$13.60
These washers are perfect for electrical connections between household appliances and commercial appliances, automotive and marine applications, where the power supply has a threaded/bolt type connection.
In stock
+ −
Add to wish list
H-KIT-NB-250 M2 M3 M4 Female Thread Brass Knurled Nut Threaded Insert, 250 Pc
US$27.25
  • These Knurl Thread Insert Nut can be widely used on the injection molding for tightly fixing. It can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection.
  • No need to counterbore or countersink the boss hole since the insert has guide pilot.
  • The material of this part is brass and it can resist heat.Made of durable brass, which have superior rust resistance and the excellent of oxidation resistance, can ensure long time using.
  • Accord with standardized metric system. And the average error is less than 0.01mm. The screw thread is quite sharp, clean and accurate without burr. The accurate size makes your installment or repair easier.
  • Widely used in mobile phones, laptops, various plastic casings, communications, micro-motors, computers, electrical appliances, electronics, toys, watches, lighting, locomotives, etc, and it can be mounted into the taper hole by ultrasonic or heat, or molded during injection.
In stock
+ −
Add to wish list
H-KIT-CW-280 Kit 280pcs M5-M20 Copper Washers 12 Sizes
US$31.80
These copper washers are perfect for electrical connections on household and commercial appliances, automotive and marine devices.
· Good electrical conductivity and thermal conductivity.
· Durable copper material which serves for a long using time.
In stock
+ −
Add to wish list
H-KIT-HC-60 Kit 60 pcs Hose Clamps 8-38mm Stainless Steel Clips Worm Gear
US$27.25
Kit 60 pcs Metric Hose clamps
In stock
+ −
Add to wish list
H-KIT-RN-150 Kit 150 pcs Steel Rivet Nut
US$18.15
Kit 150 pcs Steel Rivet Nut
In stock
+ −
Add to wish list
H-KIT-WI-120 Kit 120 PCS Furniture Hex Socket Threaded Inserts, M4 M5 M6 M8 M10
US$18.15

Kit 120 PCS Furniture Hex Socket Threaded Inserts, M4 M5 M6 M8 M10  

 

In stock
+ −
Add to wish list
H-KIT-FW-SS 684Pcs/kit DIN125 M2 ~ M12 Stainless Steel Flat Washers
US$18.15
H-KIT-FW-SS  684Pcs/kit DIN125 M2 ~ M12 Stainless Steel Flat Washers Comes in divider compartment plastic box.  
In stock
+ −
Add to wish list
H-KIT-M1-ST Kit Phillips Micro Self-tapping Screws Black Round Head, Sizes: M1- M1.2- M1.4- M1.7
US$16.33
Phillips Micro Mini Screws are widely used for computers, phones, watches, glasses, electronics, electrical appliances, furniture, toys, automobiles or anything else for repair that requires small screws.
In stock
+ −
Add to wish list
M2 M3 M4 Stainless Steel Hex Socket Cap Head Screws, Washers, Nuts Assortment Kit 1080pcs
US$36.35
This handy assortment of stainless Hex Cap M2-M3-M4 screws and nuts is a good asset for the DIY hobbyist to keep in the workshop for those new projects.
In stock
+ −
Add to wish list
S-M3-KITC Nylon M3 Male Female Hex Standoff Spacer, Hex Nuts, screws, Assortment Kit PCB 250 pieces
US$18.15
Nylon M3 Male Female Hex Standoff Spacer, Hex Nuts, screws, Assortment Kit PCB 250 pieces
In stock
+ −
Add to wish list
Metal Screw Nut and Mounting Kit -M2
US$25.41
The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass hexagonal copper columns, for a total of 320 pieces. The M2-size screw set is suitable for motherboards, sensors or other devices with M2 mounting holes (2mm). The metal material ensures the stability of the component installation.
In stock
+ −
Add to wish list
S-KIT-B-36 Brass Standoff Kit with Nuts and Screws, 36 pcs
US$4.53

Kit includes:4 x M3 Brass Standoffs, 5mm;4 x M3 Brass Standoffs, 15mm;4 x M3 Brass Standoffs, 30mm;12 x M3 nuts;12 x M3 screws

In stock
+ −
Add to wish list
300 piece M3 Brass Hex Standoff Kit with Male to Female and Female to Female Standoffs
US$31.77
This kit contains a total of 300 pieces of  Brass Hex M3 Male to Female Standoffs with corresponding Female to Female M3 Extension Standoffs.
In stock
+ −
Add to wish list
Zinc-Plated Spring Clamps Assortment Kit
US$13.99

This is a compact kit that contains spring clamps for flexible tubing, the diameter these clips can handle range from 6,7,8,9 and 10mm. 

In stock
+ −
Add to wish list
H-KIT-BI150-M2 150 pcs Brass Inserts Nuts Kit - M2.5 Size
US$17.97

This kit includes a set of different length M2.5 brass inserts. They can be used as a solid foundation to mount a screw to fasten your parts without stripping the plastic.

In stock
+ −
Add to wish list
H-KIT-440 440 Piece Stainless Steel M3 M4 M5 Hex Socket Cap Screws and Nuts Kit
US$39.95
This is a handy kit for the hobbyist bench with an assortment of M3, M4, and M5 stainless steel hex socket head screws and nuts.
In stock
+ −
Add to wish list
S-KIT-B-015 M3 Standoffs male/female & Spacers, Brass plated in 4 sizes, with hexnuts.
US$12.95
This kit is an assortment of M3 size brass plated standoffs and spacers with hexnuts. Excellent for spare parts.
In stock
+ −
Add to wish list
S-M3-KITB 180 pcs/set, M3 Nylon Black Hex Male-Female Hardware Kit
US$12.53
This hardware kit is made for those requirements for nylon hex standoffs, screws and nuts in black, all neatly packaged in a small reusable plastic box.
In stock
+ −
Add to wish list
1 2