Pushbutton Switches-LED

1 2 3
US$0.76
Yellow wire stranded 20 AWG cut & stripped 21cm. long (8.25”) attached with quick disconnect terminal 0.110” for use with PBS-LED-120W series switches.
In stock
+
Add to wish list

US$6.99
These illuminated waterproof chrome-plated metal pushbuttons give a professional appearance to any project. When you press it the 'normally-open' contact shorts to the common contact and the ‘normally closed’ contact button opens. The switches will stay in this position until the button is push again. Waterproofing is provided with a rubber O-ring. On the front of the button is a flat metal actuator, surrounded by a plastic LED ring. On the back there are 3 contacts for the switch; C (common), NO (normally open) and NC (normally closed) and 2 contacts for the LED ring (+ and -). Connect 12VDC to the LED ring to have it light up nicely, there's a built in resistor!
In stock
+
Add to wish list

US$6.99
These illuminated waterproof chrome-plated metal pushbuttons give a professional appearance to any project. When you press it the 'normally-open' contact shorts to the common contact and the ‘normally closed’ contact button opens. The switches will stay in this position until the button is push again. Waterproofing is provided with a rubber O-ring. On the front of the button is a flat metal actuator, surrounded by a plastic LED ring. On the back there are 3 contacts for the switch; C (common), NO (normally open) and NC (normally closed) and 2 contacts for the LED ring (+ and -). Connect 12VDC to the LED ring to have it light up nicely, there's a built in resistor!
Delivery within 2-3 weeks
+
Add to wish list

US$6.35
These illuminated waterproof chrome-plated metal pushbuttons give a professional appearance to any project. These are latching pushbuttons. When you press it the 'normally-open' contact shorts to the common contact and the ‘normally closed’ contact button opens. The switches will stay in this position until the button is push again. Waterproofing is provided with a rubber O-ring. On the front of the button is a flat metal actuator, surrounded by a plastic LED ring. On the back there are 3 contacts for the switch; C (common), NO (normally open) and NC (normally closed) and 2 contacts for the LED ring (+ and -). Connect 12VDC to the LED ring to have it light up nicely, there's a built in resistor!
Delivery within 2-3 weeks
+
Add to wish list

US$3.00
This Mini Illuminated Momentary Power Button is an adorable breadboard-friendly tactile switch that has a built-in LED. It provides a simple way to add a tactile switch and a colorful universal power symbol to your project.  The tact switch is about the same size as 6mm tactile switches and can snap into a breadboard. There are an additional two pins that connect to the anode and cathode of a small LED that shines through the top. Note that this is a momentary button, not a on-off switch! Also, the LED is not connected to the switch in any way, and does not include a resistor. You'll need to add your own ~1K resistor and control the LED with a microcontroller pin or whatever you like.
In stock
+
Add to wish list

US$3.00
This Mini Illuminated Momentary Power Button it an adorable breadboard-friendly tactile switch that has a built-in LED. It provides a simple way to add a tactile switch and a colorful universal power symbol to your project.  The tact switch is about the same size as 6mm tactile switches and can snap into a breadboard. There are an additional two pins that connect to the anode and cathode of a small LED that shines through the top. Note that this is a momentary button, not a on-off switch! Also, the LED is not connected to the switch in any way, and does not include a resistor. You'll need to add your own ~1K resistor and control the LED with a microcontroller pin or whatever you like.
In stock
+
Add to wish list

US$10.42
These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a green plastic LED ring. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the green LED ring (+ and -). Connect 3 to 6V to the LED to have it light up nicely, there's a built in resistor! If you want to use this with a higher voltage, say 12V or 24V, simply add a 470 ohm resistor in series with the LED connection to keep the LED current at around 20mA.
In stock
+
Add to wish list

US$5.78
This button locks and lights up when pushed. It’s perfect for DIY projects which require a button and it’s easy to mount in any kind of enclosure. It has a coloured plastic cover with a black base. The included LED has a built in resistor which allows it to support a voltage range from 5V~12V. With a mechanical lifetime of 5 million pushes, it is safe and reliable.
In stock
+
Add to wish list

US$5.78
This button locks and lights up when pushed. It’s perfect for DIY projects which require a button and it’s easy to mount in any kind of enclosure. It has a coloured plastic cover with a black base. The included LED has a built in resistor which allows it to support a voltage range from 5V~12V. With a mechanical lifetime of 5 million pushes, it is safe and reliable.
In stock
+
Add to wish list

US$5.78
This button locks and lights up when pushed. It’s perfect for DIY projects which require a button and it’s easy to mount in any kind of enclosure. It has a coloured plastic cover with a black base. The included LED has a built in resistor which allows it to support a voltage range from 5V~12V. With a mechanical lifetime of 5 million pushes, it is safe and reliable.
In stock
+
Add to wish list

US$5.78
This button locks and lights up when pushed. It’s perfect for DIY projects which require a button and it’s easy to mount in any kind of enclosure. It has a coloured plastic cover with a black base. The included LED has a built in resistor which allows it to support a voltage range from 5V~12V. With a mechanical lifetime of 5 million pushes, it is safe and reliable.
In stock
+
Add to wish list

US$5.78
This button locks and lights up when pushed. It’s perfect for DIY projects which require a button and it’s easy to mount in any kind of enclosure. It has a coloured plastic cover with a black base. The included LED has a built in resistor which allows it to support a voltage range from 5V~12V. With a mechanical lifetime of 5 million pushes, it is safe and reliable.
In stock
+
Add to wish list

US$3.84
This is a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good.
In stock
+
Add to wish list

US$3.84
This is a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good. The body is a black plastic with the LED built inside.
In stock
+
Add to wish list

US$3.84
This is a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good. The body is a black plastic with the LED built inside.
In stock
+
Add to wish list

US$3.84
This is a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good. The body is a black plastic with the LED built inside.
In stock
+
Add to wish list

US$10.70
These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated red LED ring. It is a SPDT with 16mm threading and 1mm pitch.  This button is perfect for basic On/Off functions.
In stock
+
Add to wish list

US$10.70
These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated white LED ring. It is a SPDT with 16mm threading and 1mm pitch.  This button is perfect for basic On/Off functions. Overall length (including leads) is 1.5" and has small solder lugs for connection.
In stock
+
Add to wish list

US$8.33
These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated yellow LED ring. It is a SPDT with 16mm threading and 1mm pitch.  This button is perfect for basic On/Off functions.
In stock
+
Add to wish list

US$10.70
These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated green LED ring. It is a SPDT with 16mm threading and 1mm pitch.  This button is perfect for basic On/Off functions.
In stock
+
Add to wish list

US$10.70
These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated blue LED ring. It is a SPDT with 16mm threading and 1mm pitch.  This button is perfect for basic On/Off functions. Overall length (including leads) is 1.5" and has small solder lugs for connection.
In stock
+
Add to wish list

US$10.61
These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated red LED ring. It is a SPDT with 16mm threading and 1mm pitch.  This button is perfect for basic On/Off functions. Overall length (including leads) is 1.5" and has small solder lugs for connection.
In stock
+
Add to wish list

US$10.70
These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated white LED ring. It is a SPDT with 16mm threading and 1mm pitch.  This button is perfect for basic On/Off functions. Overall length (including leads) is 1.5" and has small solder lugs for connection.
In stock
+
Add to wish list

US$10.70
These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated yellow LED ring. It is a SPDT with 16mm threading and 1mm pitch.  This button is perfect for basic On/Off functions.
In stock
+
Add to wish list

US$10.70
These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated green LED ring. It is a SPDT with 16mm threading and 1mm pitch.  This button is perfect for basic On/Off functions.
In stock
+
Add to wish list

US$10.70
These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated blue LED ring. It is a SPDT with 16mm threading and 1mm pitch.  This button is perfect for basic On/Off functions.
In stock
+
Add to wish list

US$2.77
It's a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good. 
In stock
+
Add to wish list

US$2.77
It's a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good. 
In stock
+
Add to wish list

US$2.77
It's a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good. 
In stock
+
Add to wish list

US$2.77
The body is a black plastic with the LED built inside. There are two contacts for the button and two contacts for the LED, one marked + and one -. The forward voltage of the LED is about 2.2V so connect a 220 to 1000 ohm resistor in series just as you would with any other LED to your 3V or higher power supply. 
In stock
+
Add to wish list

US$2.77
The body is a black plastic with the LED built inside. There are two contacts for the button and two contacts for the LED, one marked + and one -. The forward voltage of the LED is about 2.2V so connect a 220 to 1000 ohm resistor in series just as you would with any other LED to your 3V or higher power supply. 
In stock
+
Add to wish list

US$2.77
The body is a black plastic with the LED built inside. There are two contacts for the button and two contacts for the LED, one marked + and one -. The forward voltage of the LED is about 2.2V so connect a 220 to 1000 ohm resistor in series just as you would with any other LED to your 3V or higher power supply. 
In stock
+
Add to wish list

US$10.42
This button is a momentary push button, when you press it the 'normally-open' contact shorts to the common contact. When you release it, the contacts open up again. The switch and LED are separated, so you could wire it to turn on when pressed or vice versa or whatever you wish!
In stock
+
Add to wish list

US$10.42
This button is an on/off switch button, when you press it the 'normally-open' contact shorts to the common contact and the button stays 'pressed'. When you press it a second time, the button springs open, and the contacts open up again. 
In stock
+
Add to wish list

US$10.42
This button is a momentary push button, when you press it the 'normally-open' contact shorts to the common contact. When you release it, the contacts open up again. The switch and LED are separated, so you could wire it to turn on when pressed or vice versa or whatever you wish!
In stock
+
Add to wish list

US$10.42
These chrome-plated metal buttons are rugged and waterproof and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep any water out of the enclosure.
In stock
+
Add to wish list

US$10.42
This button is an on/off switch button, when you press it the 'normally-open' contact shorts to the common contact and the button stays 'pressed'. When you press it a second time, the button springs open, and the contacts open up again. 
In stock
+
Add to wish list
1 2 3