Pushbutton Switches-LED

1 - 9
3 4 5 6 7 8 9 10 11 12
US$10.42
These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a green plastic LED ring. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the green LED ring (+ and -). Connect 3 to 6V to the LED to have it light up nicely, there's a built in resistor! If you want to use this with a higher voltage, say 12V or 24V, simply add a 470 ohm resistor in series with the LED connection to keep the LED current at around 20mA.
In stock
+
Add to wish list

US$5.78
This button locks and lights up when pushed. It’s perfect for DIY projects which require a button and it’s easy to mount in any kind of enclosure. It has a coloured plastic cover with a black base. The included LED has a built in resistor which allows it to support a voltage range from 5V~12V. With a mechanical lifetime of 5 million pushes, it is safe and reliable.
In stock
+
Add to wish list

US$5.78
This button locks and lights up when pushed. It’s perfect for DIY projects which require a button and it’s easy to mount in any kind of enclosure. It has a coloured plastic cover with a black base. The included LED has a built in resistor which allows it to support a voltage range from 5V~12V. With a mechanical lifetime of 5 million pushes, it is safe and reliable.
In stock
+
Add to wish list

US$5.78
This button locks and lights up when pushed. It’s perfect for DIY projects which require a button and it’s easy to mount in any kind of enclosure. It has a coloured plastic cover with a black base. The included LED has a built in resistor which allows it to support a voltage range from 5V~12V. With a mechanical lifetime of 5 million pushes, it is safe and reliable.
In stock
+
Add to wish list

US$5.78
This button locks and lights up when pushed. It’s perfect for DIY projects which require a button and it’s easy to mount in any kind of enclosure. It has a coloured plastic cover with a black base. The included LED has a built in resistor which allows it to support a voltage range from 5V~12V. With a mechanical lifetime of 5 million pushes, it is safe and reliable.
In stock
+
Add to wish list

US$5.78
This button locks and lights up when pushed. It’s perfect for DIY projects which require a button and it’s easy to mount in any kind of enclosure. It has a coloured plastic cover with a black base. The included LED has a built in resistor which allows it to support a voltage range from 5V~12V. With a mechanical lifetime of 5 million pushes, it is safe and reliable.
In stock
+
Add to wish list

US$3.84
This is a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good.
In stock
+
Add to wish list

US$3.84
This is a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good. The body is a black plastic with the LED built inside.
In stock
+
Add to wish list

US$3.84
This is a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good. The body is a black plastic with the LED built inside.
In stock
+
Add to wish list

US$3.84
This is a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good. The body is a black plastic with the LED built inside.
In stock
+
Add to wish list

US$10.70
These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated red LED ring. It is a SPDT with 16mm threading and 1mm pitch.  This button is perfect for basic On/Off functions.
In stock
+
Add to wish list

US$10.70
These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated white LED ring. It is a SPDT with 16mm threading and 1mm pitch.  This button is perfect for basic On/Off functions. Overall length (including leads) is 1.5" and has small solder lugs for connection.
In stock
+
Add to wish list

US$8.33
These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated yellow LED ring. It is a SPDT with 16mm threading and 1mm pitch.  This button is perfect for basic On/Off functions.
In stock
+
Add to wish list

US$10.70
These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated green LED ring. It is a SPDT with 16mm threading and 1mm pitch.  This button is perfect for basic On/Off functions.
In stock
+
Add to wish list

US$10.70
These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated blue LED ring. It is a SPDT with 16mm threading and 1mm pitch.  This button is perfect for basic On/Off functions. Overall length (including leads) is 1.5" and has small solder lugs for connection.
In stock
+
Add to wish list
1 - 9
3 4 5 6 7 8 9 10 11 12