Our Brands

Button Pads

Newest Items First
32 Per Page
1611-ADA Silicone Elastomer 4x4 Button Keypad - for 3mm LEDs
1611-ADA Silicone Elastomer 4x4 Button Keypad - for 3mm LEDs
US$8.67
Each button is 10mm x 10mm square and 10mm tall. There is 5mm of grid spacing between the buttons. You can 'tile' the button pads edge-to-edge and they'll grid up correctly. You can also cut the pads down if you like, the silicone is very soft.
In stock
+ −
Add to wish list
COM-09277 Button Pad 2x2 - Breakout PCB
COM-09277 Button Pad 2x2 - Breakout PCB
US$6.93
Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad.
In stock
+ −
Add to wish list
COM-07836 Button Pad 2x2 - Led Compatible
COM-07836 Button Pad 2x2 - Led Compatible
US$4.13
Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display simple colors under each button. Mainly, we wanted to use our tri-color LEDs to create a full RGB color for each button.
In stock
+ −
Add to wish list
COM-08746 Button Pad 2x2 Top Bezel
COM-08746 Button Pad 2x2 Top Bezel
US$5.53
Black 1/8" ABS plastic. We use four 4/40-0.5" size screws matched with plastic standoffs to attach the 2x2 button pad and Simon project boards. Using two of these bezels with two of the bottom bezels will create a 4x4 bezel appropriate for the full button pad.
In stock
+ −
Add to wish list
COM-08033 Button Pad 4x4 - Led Compatible
COM-08033 Button Pad 4x4 - Led Compatible
US$13.93
This is a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad.
In stock
+ −
Add to wish list
COM-07835 Button Pad 4x4 - Led Compatible
COM-07835 Button Pad 4x4 - Led Compatible
US$13.93
Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display simple colors under each button. Mainly, we wanted to use our tri-color LEDs to create a full RGB color for each button.
In stock
+ −
Add to wish list