This product features a water drop (water level) sensor with a relay for switching high voltage and current devices on or off.
The panel will detect water on the traces and send back a resistance level to the module board. The module board requires 12V DC applied to the pins Vcc and GND. You can use the terminal blocks to screw in an AC voltage source 250 at a max current of 10Amp or 125V AC at 15amps max.
You have either Normally open as NO or Normally closed as NC, whichever suits your application needs. You may also insert a 30V DC at 10Amp max if you desire on the terminal blocks. The potentiometer on the module board will adjust the sensitivity.
Specifications:
- No microcontroller needed.
- Relay rating: 10A @250VAC or 15A @125VAC or 10A @ 30VDC
- Led indicator for power
- Module Board Power: 12 VDC
WARNING
