Electromechanical

US$2.58
This is a yellow color top on the black plastic body knob with a white line indicator. Plastic knob with brass insert and set screw fittings. This knob will fit for .25" shafts. Diameter 0.5" and height is 0.63".
In stock
+
Add to wish list

US$2.58
This is a green color top on the black plastic body knob with a white line indicator. Plastic knob with brass insert and set screw fittings. This knob will fit for .25" shafts. Diameter 0.5" and height is 0.63".
Delivery within 2-3 weeks
+
Add to wish list

US$2.58
This is a blue color top on the black plastic body knob with a white line indicator. Plastic knob with brass insert and set screw fittings. This knob will fit for .25" shafts. Diameter 0.5" and height is 0.63".
In stock
+
Add to wish list

US$3.22

Chrome finish on top of the black plastic body knob with a white line indicator. Plastic knob with brass insert and set screw fittings. This knob will fit for .25" shafts. Diameter 1.37" and height is 0.87".

In stock
+
Add to wish list

US$1.39
This glass reed switch is a normally open type with a dimension of 14 x 2mm. It is compact in size and light weight allowing it to be installed in extremely limited space, very suitable for miniaturization of circuits. It doesn't use the sliding element, thus, metal fatigue phenomenon will not appear, effectively eliminating mechanical failure and lifespan.
In stock
+
Add to wish list

US$19.95
Control system: +pulse width control 1500µsec neutral, Idle current: 7.4mA at stopped, Operating voltage range: 4.8V to 6.0V, Running current: 160mA at no load, Operating speed @ 4.8V: 0.19 sec. at no load.
In stock
+
Add to wish list

US$5.53
The 5/8” -27 size is one and 3/8”-17 is the other. If you have a mike holder of one size and a stand with the other, you’ll need an adaptor to use them together. One of these small adaptors will solve the problem; road groups should carry a few of each.
In stock
+
Add to wish list

US$6.93
This is is designed for mounting on a table top, side wall etc., will accommodate a gooseneck or microphone extension pipe. Made for use as a permanent mount. The larger diameter is suggested for better strength if use will be constant and rigorous. Chrome plated finish; 5/8-27” standard threads.
In stock
+
Add to wish list

US$35.49

Features: Light and smart design for easy carrying. Low noise and excellent performance. Headset with dynamic condense microphone. Ideal for schools, churches, factories, meetings, guides and street vendors. Spare microphone: PA5N/SP1.

In stock
+
Add to wish list

US$22.39
Features: Provides sharp blasts of high and low whoop tones. 115 db/m sound pressure level. No moving parts. Protects homes, cars and boats. 10 Watts. 12V DC. 5 - 1/4" Diameter x 5 -3/4" Length.
In stock
+
Add to wish list

US$8.07
This is a fine quality 4" replacement speaker with a 1.7oz ceramic magnet. Speaker is 8ohm impedance rated at 5W.
In stock
+
Add to wish list

US$5.31
Size 1 1/2" 0.1W, freq, resp. 750+/-60, freq. range 7000Hz, sensivity 89db, magnet wt. 0.5oz.
In stock
+
Add to wish list

US$3.85
This is a high powered motor that fits in the same form factor as used by the GM2/GM3 & GM8/GM9 style gear motors.
In stock
+
Add to wish list

US$1.11

Dimensions: 1.25" x .25". Rated: 250V (note: indicate or not indicated on the fuse.). Equivalent to Littlefuse 313 Series. Prepackaged: Order fuses in increments of 5 pcs.

In stock
+
Add to wish list

US$1.36

Dimensions: 20mm x 5mm. Rated: 250V (note: indicate or not indicated on the fuse.). Prepackaged: Order fuses in increments of 5 pcs.

In stock
+
Add to wish list