Our Brands

Electromechanical

151 - 165
159 160 161 162 163 164 165 166 167 168 169 170 171 172 173
167 - 181
Newest Items First
15 Per Page
GAMES-JB-01GN Green Handle Ball - Arcade Joystick Replacement
US$7.69
This is a generic green ball that has a threaded screw mount to fit onto any Sanwa, Seimitsu and Zippy Joystick controls. If you want to replace any broken top or change the color scheme without having to replace the entire unit, then this product is ideal. Color: Green. Weight: 25.1g. Diameter: 35.25 mm. Screw/Threading: 5 x 10 mm (Dia. x Depth).
In stock
+ −
Add to wish list
GAMES-JB-01B Black Handle Ball - Arcade Joystick Replacement
US$7.69
This is a generic black ball that has a threaded screw mount to fit onto any Sanwa, Seimitsu and Zippy Joystick controls. If you want to replace any broken top or change the color scheme without having to replace the entire unit, then this product is ideal. Color: Black. Weight: 25.1g. Diameter: 35.25 mm. Screw/Threading: 5 x 10 mm (Dia. x Depth).
Delivery within 2-3 weeks
+ −
Add to wish list
GAMES-JB-01W White Handle Ball - Arcade Joystick Replacement
US$7.69
This is a generic white ball that has a threaded screw mount to fit onto any Sanwa, Seimitsu and Zippy Joystick controls. If you want to replace any broken top or change the color scheme without having to replace the entire unit, then this product is ideal. Color: White. Weight: 25.1g. Diameter: 35.25 mm. Screw/Threading: 5 x 10 mm (Dia. x Depth).
In stock
+ −
Add to wish list
SW-ENC-01 Rotary Encoder with D shape Shaft, 20mm
US$2.76

This breadboard friendly 24-pulse rotary encoder features a handy select switch actuated by pushing in on the knob to close a separate switch. One side has a 3 pin connector (ground and two coding pins) and the other side has two pins for a normally-open switch. The unit outputs gray code so that you can tell how far and in which direction the encoder has been turned.

In stock
+ −
Add to wish list
GAMES-SW-01 Normally Open Snap Action Micro Switch with Lever
US$3.07
This Product is a simple Micro Switch that has only one output. When the lever is not pressed The Output from Pin N.O is open, when the lever is pressed the output becomes closed creating a closed circuit. Often found inside arcade joystick controls or any mechanical limit switches.
In stock
+ −
Add to wish list
3369-ADA Mini External USB Stereo Speaker
US$17.24
This Mini External USB 2.0 Speaker does not require or use a 3.5mm audio jack. You'll get great audio, even with a device that doesn't have a head phone jack. And since it is powered over USB, there's no need to charge it by other means, merely plug it into your desired device's USB port and listen to the audio flow. Compact and convenient to carry, it's simple and practical. With 2 built-in speakers and no battery or adapter needed, this plug-and-play speaker is perfect if you need a quick and portable audio solution.
In stock
+ −
Add to wish list
GAMES-05 2-Way/4-Way/8-Way Swappable Restrictor gate – Arcade Control Joystick
US$19.95
2-Way, 4-Way and 8-Way, what do all these way mean? This joystick is incredible because it has a green plate on the bottom that can be screwed in to limit the movement to certain directions. 2-Way allows users to move the joystick left and right only. 4-way allows users to move in the traditional up, down, left and right. The restrictor plates are set in 8-Way position as default allowing you to move the joystick in linear axis and diagonally!
In stock
+ −
Add to wish list
PI-MIC1 USB Microphone for Raspberry Pi & Desktop
US$9.79
This Microphone module is designed to work with any Raspberry Pi device running linux operating system. Great for creating voice recognition software or it can be also used on any windows operating system without the need of installing additional drivers (exception on windows 10). Since it is USB based, you don’t need to use your microphone jack and a usb port to power the unit. This Mic only needs one USB port for power and signal making it a great recommendation for RPI devices.
Delivery within 2-3 weeks
+ −
Add to wish list
SRA-12VDC-CL 12VDC 20A Subminature High Power Relay SRA series
US$2.09
Electromechanical Relay rated for 12VDC 20Amps Single Pull, Double Throw that is Normally Open. Recommend for high power systems like Motor Load Switching, and many more.
In stock
+ −
Add to wish list
KN-10W Plastic Knob for Potentiometer with White Indicator
US$0.83
This small plastic knob is designed for potentiometers that have a diameter of 5.5mm, any of our common linear potentiometer will fit on this unit. It also has a white indicator to show the position of the potentiometer. This unit is 1.6 cm long by 1.5cm wide on the base with the top being 0.9cm wide.
In stock
+ −
Add to wish list
KN-10R Plastic Knob for Potentiometer with Red Indicator
US$0.83
This small plastic knob is designed for potentiometers that have a diameter of 5.5mm, any of our common linear potentiometer will fit on this unit. It also has a red indicator to show the position of the potentiometer. This unit is 1.6 cm long by 1.5cm wide on the base with the top being 0.9cm wide.
In stock
+ −
Add to wish list
KN-10OR Plastic Knob for Potentiometer with Orange Indicator
US$0.83
This small plastic knob is designed for potentiometers that have a diameter of 5.5mm, any of our common linear potentiometer will fit on this unit. It also has a orange indicator to show the position of the potentiometer. This unit is 1.6 cm long by 1.5cm wide on the base with the top being 0.9cm wide.
In stock
+ −
Add to wish list
KN-10Y Plastic Knob for Potentiometer with Yellow Indicator
US$0.83
This small plastic knob is designed for potentiometers that have a diameter of 5.5mm, any of our common linear potentiometer will fit on this unit. It also has a yellow indicator to show the position of the potentiometer. This unit is 1.6 cm long by 1.5cm wide on the base with the top being 0.9cm wide.
In stock
+ −
Add to wish list
MOT-E-01 Plastic Incremental Encoder for DC motors
US$1.81
This is a plastic encoder designed to fit on our magician chassis motors or any of the products shown below in related products! This is basically a plastic circle that has 20 slits for light to pass through, the encoder works like any other incremental encoder. The incremental encoder consists of a photocell arrangement as a coded disk with evenly spaced dark and transparent segments on its surface. The disk rotates or moves past the light source generating a stream of square wave pulses that determine the angular position of the shaft.
In stock
+ −
Add to wish list
MOT-H-01 L Bracket for NEMA 17 Stepper Motor
US$4.89
This L bracket was specifically designed for use in 3D printers and CNC machines. The bracket supports the NEMA17 motor. (Product: MOT-SM-17) All addition mounting hardware is included.
In stock
+ −
Add to wish list
151 - 165
159 160 161 162 163 164 165 166 167 168 169 170 171 172 173
167 - 181