Our Brands

Electromechanical

149 - 163
157 158 159 160 161 162 163 164 165 166 167 168 169 170 171
165 - 179
Newest Items First
15 Per Page
AGX/1A, Fuse Glass Fast Blow 1A
US$0.78
Dimensions: 1.00" x .25" (25.4mm x 6mm). Rated: 32VAC (note: voltage may not be indicated on the fuse.).
In stock
+ −
Add to wish list
RM-XH-M138 120VAC 30A High Current Dual Output Relay Controller Board with 12VDC Logic
US$12.59
This is a simple relay board that is controlled by a 12VDC input voltage. This is an ideal product for creating a switch activated by a 12VDC source, such as an output voltage of a motion sensor, valve or solenoid.
In stock
+ −
Add to wish list
S3003 Analog Standard Servo, S3003 Compatible
US$12.53
This a compatible s3003 servo motor that operates from 4 to 6v and offers torque ranging from 3.17kg to 4.10kg per cm. Great for standard applications and robotic movement, please note this motor is not continuous and has a set angle that it can turn of 180 degrees software wise. Include with the motor are four unique servo mounting heads (spindles/arms). Four rubber dampers to fasten the unit and four screws to fasten a servo attachment arm.
In stock
+ −
Add to wish list
17MOMTS32 Momentary Pushbutton Switch N.O.
US$1.16
Type: Momentary Normally Open SPST. Switch Body Diameter: 6.4mm. Overall Body Length: 13.5mm. Button Diameter: 2.6mm. Mounting Hole Diameter: 4mm. Terminal Type: PCB Mounting. Contact Rating: 500mA @120 VAC or 28 VDC. Electrical Life: 30,000 make and break cycles at full load. Contact Resistance: 20 mΩ max. initial @2-4 VDC,100 mA. Insulation Resistance: 1,000 MΩ min. Dielectric Strength: 500 V RMS @ sea level. Operating Temperature: -30°C to 85°C.
In stock
+ −
Add to wish list
44-573-0 Momentary Pushbutton Switch N.O.
US$3.84
Type: Momentary Normally Open SPST. Switch Body Diameter: 10mm. Overall Body Length: 19mm. Button Diameter: 10mm. Mounting Hole Diameter: 7mm. Terminal Type: Solder Lug. Contact Rating: 1A @125VAC.
In stock
+ −
Add to wish list
NO-110-BLACK Momentary Pushbutton Switch N.O.
US$0.53
Type: Single Pole Single Throw (SPST). Rating: 0.5A / 24V momentary contact. Connections: Solder pins. Mounting Diameter: 0.275" with locknut for chassis mounting. Threaded Shaft Length: 0.25". Switch Body Diameter: 0.375". Switch Body Length: 0.65".
In stock
+ −
Add to wish list
SW-EMERG1 Emergency Stop Switch
US$13.18
This pushbutton Emergency Stop Switch comes mounted in a handy plastic enclosure. The switch has two sets of contacts one N/O and one N/C. Pushing the switch latches the contacts in the opposite condition. Turning the button releases the latched condition to return to normal operation.
In stock
+ −
Add to wish list
GAMES-JB-01R Red Handle Ball - Arcade Joystick Replacement
US$7.69
This is a generic red ball that has a threaded screw mount to fit onto any Sanwa, Seimitsu and Zippy Joystick controls. If you want to replace any broken top or change the color scheme without having to replace the entire unit, then this product is ideal. Color: Red. Weight: 25.1g. Diameter: 35.25 mm. Screw/Threading: 5 x 10 mm (Dia. x Depth).
In stock
+ −
Add to wish list
GAMES-JB-01Y Yellow Handle Ball - Arcade Joystick Replacement
US$7.69
This is a generic yellow ball that has a threaded screw mount to fit onto any Sanwa, Seimitsu and Zippy Joystick controls. If you want to replace any broken top or change the color scheme without having to replace the entire unit, then this product is ideal. Color: Yellow. Weight: 25.1g. Diameter: 35.25 mm. Screw/Threading: 5 x 10 mm (Dia. x Depth).
In stock
+ −
Add to wish list
GAMES-JB-01GN Green Handle Ball - Arcade Joystick Replacement
US$7.69
This is a generic green ball that has a threaded screw mount to fit onto any Sanwa, Seimitsu and Zippy Joystick controls. If you want to replace any broken top or change the color scheme without having to replace the entire unit, then this product is ideal. Color: Green. Weight: 25.1g. Diameter: 35.25 mm. Screw/Threading: 5 x 10 mm (Dia. x Depth).
In stock
+ −
Add to wish list
GAMES-JB-01B Black Handle Ball - Arcade Joystick Replacement
US$7.69
This is a generic black ball that has a threaded screw mount to fit onto any Sanwa, Seimitsu and Zippy Joystick controls. If you want to replace any broken top or change the color scheme without having to replace the entire unit, then this product is ideal. Color: Black. Weight: 25.1g. Diameter: 35.25 mm. Screw/Threading: 5 x 10 mm (Dia. x Depth).
Delivery within 2-3 weeks
+ −
Add to wish list
GAMES-JB-01W White Handle Ball - Arcade Joystick Replacement
US$7.69
This is a generic white ball that has a threaded screw mount to fit onto any Sanwa, Seimitsu and Zippy Joystick controls. If you want to replace any broken top or change the color scheme without having to replace the entire unit, then this product is ideal. Color: White. Weight: 25.1g. Diameter: 35.25 mm. Screw/Threading: 5 x 10 mm (Dia. x Depth).
In stock
+ −
Add to wish list
SW-ENC-01 Rotary Encoder with D shape Shaft, 20mm
US$2.76

This breadboard friendly 24-pulse rotary encoder features a handy select switch actuated by pushing in on the knob to close a separate switch. One side has a 3 pin connector (ground and two coding pins) and the other side has two pins for a normally-open switch. The unit outputs gray code so that you can tell how far and in which direction the encoder has been turned.

In stock
+ −
Add to wish list
GAMES-SW-01 Normally Open Snap Action Micro Switch with Lever
US$3.07
This Product is a simple Micro Switch that has only one output. When the lever is not pressed The Output from Pin N.O is open, when the lever is pressed the output becomes closed creating a closed circuit. Often found inside arcade joystick controls or any mechanical limit switches.
In stock
+ −
Add to wish list
3369-ADA Mini External USB Stereo Speaker
US$17.24
This Mini External USB 2.0 Speaker does not require or use a 3.5mm audio jack. You'll get great audio, even with a device that doesn't have a head phone jack. And since it is powered over USB, there's no need to charge it by other means, merely plug it into your desired device's USB port and listen to the audio flow. Compact and convenient to carry, it's simple and practical. With 2 built-in speakers and no battery or adapter needed, this plug-and-play speaker is perfect if you need a quick and portable audio solution.
In stock
+ −
Add to wish list
149 - 163
157 158 159 160 161 162 163 164 165 166 167 168 169 170 171
165 - 179