Our Brands

Electromechanical

147 - 161
155 156 157 158 159 160 161 162 163 164 165 166 167 168 169
163 - 177
Newest Items First
15 Per Page
35-415 Switch, Pushbutton SPST-NO Off – (On) Solder Lugs 0.187” 125v 1A, 250v 0.5A Red actuator
US$1.99
35-415 Switch, Pushbutton SPST-NO Off – (On) Solder Lugs 0.187” 125v 1A, 250v 0.5A Red actuator (On)= momentary
In stock
+ −
Add to wish list
35-036 Switch, toggle 4PDT On - - On Solder Lugs 125v 5A, 250v 2A, CSA
US$8.99
35-036 Switch, Toggle 4PDT, On - - On 12-pin Solder Lugs 125v 5A, 250v 2A CSA approval  
In stock
+ −
Add to wish list
35-016 Switch, toggle DPDT On-Off- (On) Solder Lugs 125v 5A, 250v 2A
US$5.99
35-016 Switch, toggle DPDT On-Off- (On) Solder Lugs 125v 5A, 250v 2A (On)= momentary
In stock
+ −
Add to wish list
35-012 Switch, toggle DPDT On-Off- On Solder Lugs 125v 5A, 250v 2A
US$3.99
35-012 Switch, toggle DPDT On-Off- On Solder Lugs 125v 5A, 250v 2A
In stock
+ −
Add to wish list
35-010 Switch, toggle DPDT On / On Solder Lugs 125v 5A, 250v 2A
US$4.03
35-010 Switch, toggle DPDT On / On Solder Lugs 125v 5A, 250v 2A
In stock
+ −
Add to wish list
FS5115M FEETECH High-Torque Servo
US$22.33
The FS5115M is a standard-size analog servo from FEETECH that delivers extra-high torque thanks to its powerful motor and all-metal gear train normally associated with much more expensive or larger servos. Comes with attachments and associated hardware. The output shaft is supported by two ball bearings for reduced friction. The FS5115M works with standard RC servo pulses, providing a running angle of approximately 180° over a servo pulse range of 500 µs to 2500 µs, and it has a 12″ (30 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible.
In stock
+ −
Add to wish list
55-802-0 Fuseholder, Panel mount 250V 10 amp
US$1.99
55-802-0 Fuseholder, Panel mount 250V 10 amp
In stock
+ −
Add to wish list
54-228-0 Knob, Rotary shaft ¼”
US$1.89
54-228-0 Knob, Rotary shaft ¼”
In stock
+ −
Add to wish list
50-0015-00 Switch Pushbutton PCB SPST 0.3A 12V Yellow
US$2.62
50-0015-00 Switch Pushbutton PCB SPST 0.3A 12V Yellow
In stock
+ −
Add to wish list
41-901-0 Cap for Toggle Switch Black
US$0.23
41-901-0 Cap for Toggle Switch Black
In stock
+ −
Add to wish list
41-905-0 Cap for Toggle Switch Green
US$0.23
41-905-0 Cap for Toggle Switch Green  
In stock
+ −
Add to wish list
482-ADA Rugged Metal On/Off Switch with Green LED Ring - 16mm Green On/Off
US$10.42
These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a green plastic LED ring. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the green LED ring (+ and -). Connect 3 to 6V to the LED to have it light up nicely, there's a built in resistor! If you want to use this with a higher voltage, say 12V or 24V, simply add a 470 ohm resistor in series with the LED connection to keep the LED current at around 20mA.
In stock
+ −
Add to wish list
MDL-V-7A Fuse Slow Blow 7A Axial leads
US$0.69
Dimensions: 1.25" x .25" (30mm x 6mm). Rated: 250V (note: voltage may not be indicated on the fuse.).
In stock
+ −
Add to wish list
MDL-V-4.5A Fuse Slow Blow 4.5A Axial leads
US$0.69
Dimensions: 1.25" x .25" (30mm x 6mm). Rated: 250V (note: voltage may not be indicated on the fuse.).
In stock
+ −
Add to wish list
MDL-V-3A Fuse Slow Blow 3A Axial leads
US$0.69
Dimensions: 1.25" x .25" (30mm x 6mm). Rated: 250V (note: voltage may not be indicated on the fuse.).
In stock
+ −
Add to wish list
147 - 161
155 156 157 158 159 160 161 162 163 164 165 166 167 168 169
163 - 177