Our Brands

Electromechanical

143 - 157
151 152 153 154 155 156 157 158 159 160 161 162 163 164 165
159 - 173
Newest Items First
15 Per Page
FT1117M FEETECH Mini Servo
US$11.78
Key specs at 6 V: 0.11 sec/60°, 50 oz-in (3.5 kg-cm), 20 g. The FT1117M is a miniature-sized servo from FEETECH with the same output spline as standard servos, making it compatible with standard-size servo horns. The pinion gear is plastic, but the rest of the gear train consists of all metal gears, allowing this servo to deliver the kind of speed and torque typically associated with larger servos.
Delivery within 2-3 weeks
+ −
Add to wish list
MOT-DRV8833 DRV8833 Dual H-Bridge Motor Controller Driver Board (1.5A)
US$3.49
This DRV8833 based DC motor controller board allows users to attach an external power source to power DC motors that require a little bit more current. Plug in an external power source up to 10.8VDC with a max current of 1.5A per channel. The IC onboard contains two h-bridges allowing the control of two independent DC motors or one 4 wire bipolar stepper motor. The design of this module also guarantees protection against overcurrent, short circuit, overheating and under voltage lockout. It also comes with a low power sleep mode. This module comes with straight headers that you will need to solder on the module. The pin configuration is very simple to grasp. IN1 and IN2 control the outputs OUT1 and OUT2 (1st channel). IN3 and IN4 control the outputs OUT3 and OUT4 (2nd channel). Pin EEP is for output protection and ULT is your sleep mode pin (sleep mode active when logic level low). Vcc and GND are self-explanatory.
In stock
+ −
Add to wish list
PRINT-01 RS232/TTL/USB Thermal Receipt Printer
US$55.93
With this small sized and compact thermal printer in your possession, you’ll be able to implement it in any of your personal Arduino endeavors. This printer comes with a Mini USB port and 3.3-5V TTL 5-pin connection port allowing almost any micro controller boards to interface serially with it. Program your Arduino to print text, barcodes and bitmaps using supported Thermal printer libraries. To power the printer however, you’ll need a 5V-9V supply adapter that can provide at least 1.5 A of current. This very practical receipt printer is a great choice if you’re looking for one that produces little to no noise, is easily manageable and can be implemented in a variety of applications.
In stock
+ −
Add to wish list
MOT-L298-3 DC Dual H-Bridge Motor Controller Driver Board
US$3.99
DC Dual H-Bridge Motor Controller Driver BoardThis L298 based DC motor controller board allows users to attach an external power source to power DC motors that require a little bit more current. Plug in an external power source up to 10VDC with a max current of 2.5A. The IC onboard contains two h-bridges allowing the control of two independent DC motors or one 2-phase 4 wire motor. Thanks to built in MOS switches and a design that ensures thermal protection, you can easily interface it with most microcontroller boards like the Arduino using 5V power lines and PWM I/Os. Thanks to its high current capabilities, you can use this module for a lot of demanding applications. There is even a 2mm mounting hole if needed. The installation of this module is also simple. There are two supply lines (labeled as “+” an “-”) to power the entire module, 4 signal inputs and 4 motor outputs (IN1 and IN2 control MOTOR A; IN3 and IN4 control MOTOR B). Be wary, at maximum values this board may overheat and we don’t recommend pushing this module to its limits for extended periods of time.
In stock
+ −
Add to wish list
WL-60 8m 12V Self-locking Single Channel Remote Control IR Relay Module
US$9.05
This is a self-locking single channel relay module with a two button (ON/OFF) infrared remote controller to switch the status of the relay output. You’ll be able to remotely control any device up to a distance of 8m with the contact of the relay able to drive a load capacity of up to 250VAC-10A and 30VDC-10A. Its high current tolerance allows it to control a variety of household appliances and equipment. The board also features an LED serving as visual feedback of the relay switch status and a M3 mounting hole if needed. It is very easy to setup and connect. There are two input power pins which you must supply 12VDC in labeled as VIN and GND. Once powered, you can connect your device to the three output pins (the middle one being the common, look at silkscreen of PCB to identify NO and NC pins). You can then use your remote controller to switch the relay status between NO (normally open) by pressing ON and NC (normally closed) by pressing OFF.
In stock
+ −
Add to wish list
SPK-200 Stereo Speaker - 8Ω 3W
US$3.99
This is an 8ohm 3watt fully stereo speaker. This speaker is a great choice because unlike conventional 8ohm speakers, it is much smaller and much less heavy. The speaker itself is rectangular and mounts easily to any housing. The +/- terminals have rings for ease of soldering.
In stock
+ −
Add to wish list
MOT-TB6600 TB6600 Stepper Motor Driver 5A
US$27.07
This is a professional grade, microcontroller compatible, stepper motor axis driver rated to 5A. TB6600 Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal. TB6600 stepper motor driver has a wide range power input, 9~42VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors. The stepper driver supports speed and direction control. You can set its micro step and output current with 6 DIP switch. There are 7 kinds of micro steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. And all signal terminals adopt high-speed optocoupler isolation, enhancing its anti-high-frequency interference ability. As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor. Radiator type heatsink provides efficient heat management.
In stock
+ −
Add to wish list
MOT-TB6560 TB6560 Stepper Motor Driver 3A
US$13.93
This is an easy to use TB6560 motor driver suitable for CNC machine. 1-Axis driver. This module uses the 6N137 high-speed optocoupler to ensure high speed switching output. Large heatsink ensures proper heat regulation. This unit is ideal for 42,57,86 type stepper motors with 2 or 4 phase (4 or 6 wire). The unit is not ideal for motors over 3A rating. The switches allow for different excitation modes: Synchronizing, Half-Step, 1/8 step, 1/16 step and auto half-decay.
In stock
+ −
Add to wish list
90B08S Sealed DIP switch 8 positions
US$2.62
DIP Switch with tape seal and tin contacts. These switches have a protective tape sealed top and base for protection during wave soldering and cleaning processes.
In stock
+ −
Add to wish list
BLT-GT2-1H Tensioning/Tension Spring for GT2 Belts (full hook)
US$0.69
This small spring is designed to fit on any 6mm width GT2 Belts. This simple addition provides extra tension for better accuracy and movement. You may need a plier to help secure onto the belt.
In stock
+ −
Add to wish list
BLT-GT2-852 GT2, 2mm pitch, 6mm wide, 852mm long, close-ended Belt
US$4.19
Excellent for linear movement of x and y axis components. The grooves are 2mm and work effectively on 2mm pitch GT2 tooth pulleys. This belt is close-ended, meaning it circular almost like a band belt.
In stock
+ −
Add to wish list
BLT-GT2-400 GT2, 2mm pitch, 6mm wide, 400mm long, close-ended Belt
US$3.49
Excellent for linear movement of x and y axis components. The grooves are 2mm and work effectively on 2mm pitch GT2 tooth pulleys. This belt is close-ended, meaning it circular almost like a band belt. Note: The belt is 400mm long, but since the belt is circular the length if place on a pulley is 200mm from point a to b.
In stock
+ −
Add to wish list
BLT-GT2-280 GT2, 2mm pitch, 6mm wide, 280mm long, close-ended Belt
US$3.35
Excellent for linear movement of x and y axis components. The grooves are 2mm and work effectively on 2mm pitch GT2 tooth pulleys. This belt is close-ended, meaning it circular almost like a band belt.
In stock
+ −
Add to wish list
BLT-GT2-200 GT2, 2mm pitch, 6mm wide, 200mm long, close-ended Belt
US$2.79
Excellent for linear movement of x and y axis components. The grooves are 2mm and work effectively on 2mm pitch GT2 tooth pulleys. This belt is close-ended, meaning it circular almost like a band belt.
In stock
+ −
Add to wish list
BLT-GT2-2H Tensioning/Tension Spring for GT2 Belts
US$0.55
This small spring is designed to fit on any 6mm width GT2 Belts. This simple addition provides extra tension for better accuracy and movement. You may need a plier to help secure onto the belt.
In stock
+ −
Add to wish list
143 - 157
151 152 153 154 155 156 157 158 159 160 161 162 163 164 165
159 - 173