Our Brands

Electromechanical

142 - 156
150 151 152 153 154 155 156 157 158 159 160 161 162 163 164
158 - 172
Newest Items First
15 Per Page
SPK-200 Stereo Speaker - 8Ω 3W
US$3.99
This is an 8ohm 3watt fully stereo speaker. This speaker is a great choice because unlike conventional 8ohm speakers, it is much smaller and much less heavy. The speaker itself is rectangular and mounts easily to any housing. The +/- terminals have rings for ease of soldering.
In stock
+ −
Add to wish list
MOT-TB6600 TB6600 Stepper Motor Driver 5A
US$27.07
This is a professional grade, microcontroller compatible, stepper motor axis driver rated to 5A. TB6600 Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal. TB6600 stepper motor driver has a wide range power input, 9~42VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors. The stepper driver supports speed and direction control. You can set its micro step and output current with 6 DIP switch. There are 7 kinds of micro steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. And all signal terminals adopt high-speed optocoupler isolation, enhancing its anti-high-frequency interference ability. As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor. Radiator type heatsink provides efficient heat management.
In stock
+ −
Add to wish list
MOT-TB6560 TB6560 Stepper Motor Driver 3A
US$13.93
This is an easy to use TB6560 motor driver suitable for CNC machine. 1-Axis driver. This module uses the 6N137 high-speed optocoupler to ensure high speed switching output. Large heatsink ensures proper heat regulation. This unit is ideal for 42,57,86 type stepper motors with 2 or 4 phase (4 or 6 wire). The unit is not ideal for motors over 3A rating. The switches allow for different excitation modes: Synchronizing, Half-Step, 1/8 step, 1/16 step and auto half-decay.
In stock
+ −
Add to wish list
90B08S Sealed DIP switch 8 positions
US$2.62
DIP Switch with tape seal and tin contacts. These switches have a protective tape sealed top and base for protection during wave soldering and cleaning processes.
In stock
+ −
Add to wish list
BLT-GT2-1H Tensioning/Tension Spring for GT2 Belts (full hook)
US$0.69
This small spring is designed to fit on any 6mm width GT2 Belts. This simple addition provides extra tension for better accuracy and movement. You may need a plier to help secure onto the belt.
In stock
+ −
Add to wish list
BLT-GT2-852 GT2, 2mm pitch, 6mm wide, 852mm long, close-ended Belt
US$4.19
Excellent for linear movement of x and y axis components. The grooves are 2mm and work effectively on 2mm pitch GT2 tooth pulleys. This belt is close-ended, meaning it circular almost like a band belt.
In stock
+ −
Add to wish list
BLT-GT2-400 GT2, 2mm pitch, 6mm wide, 400mm long, close-ended Belt
US$3.49
Excellent for linear movement of x and y axis components. The grooves are 2mm and work effectively on 2mm pitch GT2 tooth pulleys. This belt is close-ended, meaning it circular almost like a band belt. Note: The belt is 400mm long, but since the belt is circular the length if place on a pulley is 200mm from point a to b.
In stock
+ −
Add to wish list
BLT-GT2-280 GT2, 2mm pitch, 6mm wide, 280mm long, close-ended Belt
US$3.35
Excellent for linear movement of x and y axis components. The grooves are 2mm and work effectively on 2mm pitch GT2 tooth pulleys. This belt is close-ended, meaning it circular almost like a band belt.
In stock
+ −
Add to wish list
BLT-GT2-200 GT2, 2mm pitch, 6mm wide, 200mm long, close-ended Belt
US$2.79
Excellent for linear movement of x and y axis components. The grooves are 2mm and work effectively on 2mm pitch GT2 tooth pulleys. This belt is close-ended, meaning it circular almost like a band belt.
In stock
+ −
Add to wish list
BLT-GT2-2H Tensioning/Tension Spring for GT2 Belts
US$0.55
This small spring is designed to fit on any 6mm width GT2 Belts. This simple addition provides extra tension for better accuracy and movement. You may need a plier to help secure onto the belt.
In stock
+ −
Add to wish list
MP-PG-205 GT2 pulley (20 teeth) 5mm Bore Diameter for 6mm belts
US$1.68
This pulley connects the motor to the belt and allows for rotational motor movement to translate into linear directional movement. This type of mechanism is most often seen in 3D printers or CNC machines.
Delivery within 2-3 weeks
+ −
Add to wish list
MP-PG-206 GT2 20 Teeth Aluminium Pulley Gear – 6mm Diameter
US$2.79
This pulley connects the motor to the belt and allows for rotational motor movement to translate into linear directional movement. This type of mechanism is most often seen in 3D printers or CNC machines.
In stock
+ −
Add to wish list
BLT-GT2-1M GT2, 2mm Pitch, 6mm wide, 1meter long open-ended Belt
US$2.79
Excellent for linear movement of x and y axis components. The grooves are 2mm and work effectively on 2mm pitch GT2 tooth pulleys. This belt is open ended, meaning you need to either use zip ties or some fastener to create a band belt.
In stock
+ −
Add to wish list
7101-RA-VERT Switch, Toggle PCB SPDT 90° Vertical Bat action 3 AMP 125V ON-Off
US$1.99
7101-RA-VERT Switch, Toggle PCB SPDT 90° Vertical Bat action 3 AMP 125V ON-Off
In stock
+ −
Add to wish list
7201-RA-MOM-VER Switch, Toggle PCB DPDT 90° Vertical Bat action 6 AMP 125V ON-MOM-ON
US$1.99
7201-RA-MOM-VER Switch, Toggle PCB DPDT 90° Vertical Bat action 6 AMP 125V ON-MOM-ON
In stock
+ −
Add to wish list
142 - 156
150 151 152 153 154 155 156 157 158 159 160 161 162 163 164
158 - 172