Our Brands

Electromechanical

130 - 144
138 139 140 141 142 143 144 145 146 147 148 149 150 151 152
146 - 160
Newest Items First
15 Per Page
SER0044 DSS-M15S 270° 15KG DF Metal Servo with Analog Feedback
US$29.75
DSS-M15S servos have been well received by customers in these years. It has extremely wide angle range control, huge load capacity and excellent quality. This DSS-M15S with analog feedback has broken its internal potentiometer signal. This is an analog signal with 0~3.3V feedback. You can connect it to MCU to realize close-loop feedback control. DSS-M15S 270° Metal servo with feedback is compatible with Arduino Servo library. You can drive it with Arduino Board and read the angle value from analog side.
In stock
+ −
Add to wish list
D2425 Solid State Relay 25A – 240VAC with LED
US$17.24
The D2425 is a single phase solid-state relay for delivering fast switching while optically isolating and protecting equipment from damaging external high-voltage spikes.
In stock
+ −
Add to wish list
DRI0044-A 2x1.2A DC Motor Driver with Gravity Connector (TB6612FNG)
US$13.83
This DFRobot micro dual way DC motor driver with Gravity connector. It is design based on TB6612FNG motor driver chip. It inherits DFRobot L298N motor control logic, which only need four pins to drive 2 motors. The Gravity connector version expands four GPIO with standard Gravity connector. Once you use the Gravity IO Expansion board (DFR0265), it will be quite convenient. TB6612FNG is a dual-channel full-bridge drive chip. The maximum continuous drive current of single channel can reach 1.2A, peak value 2A/3.2A (continuous pulse / single pulse) , which can drive some micro DC motors. The control logic is similar to L298n, and the code can be directly compatible with the DFROBOT L298N motor driver. Standard XH2.54 pin can be inserted directly into the breadboard. It is a good choice for DIY project or product developments. If you need some tiny module, you can also use the TB6612FNG (DRI0044) module separately.
In stock
+ −
Add to wish list
DRI0044 2x1.2A DC Motor Driver (TB6612FNG)
US$7.88
This DFRobot micro dual way DC motor driver is design based on TB6612FNG motor driver IC. It inherits DFRobot L298N motor control logic, which only need four pins to drive 2 motors. Compared with the IC Breakout, it saves two precious GPIO resource, especially in Arduino UNO board. TB612FNG is a dual-channel full-bridge drive chip. The maximum continuous drive current of single channel can reach 1.2A, peak value 2A/3.2A (continuous pulse / single pulse) , which can drive some micro DC motors. The control logic is similar to L298n, and the code can be directly compatible with the DFROBOT L298N motor driver. Standard XH2.54 pin can be inserted directly into the breadboard. It is a good choice for DIY project or product developments.
In stock
+ −
Add to wish list
PBS-LED-200RD 12V 16mm with Red LED Ring Waterproof Latching Pushbutton Switch
US$6.99
These illuminated waterproof chrome-plated metal pushbuttons give a professional appearance to any project. When you press it the 'normally-open' contact shorts to the common contact and the ‘normally closed’ contact button opens. The switches will stay in this position until the button is push again. Waterproofing is provided with a rubber O-ring. On the front of the button is a flat metal actuator, surrounded by a plastic LED ring. On the back there are 3 contacts for the switch; C (common), NO (normally open) and NC (normally closed) and 2 contacts for the LED ring (+ and -). Connect 12VDC to the LED ring to have it light up nicely, there's a built in resistor!
In stock
+ −
Add to wish list
PBS-LED-200GN 12V 16mm with Green LED Ring Waterproof Latching Pushbutton Switch
US$6.99
These illuminated waterproof chrome-plated metal pushbuttons give a professional appearance to any project. When you press it the 'normally-open' contact shorts to the common contact and the ‘normally closed’ contact button opens. The switches will stay in this position until the button is push again. Waterproofing is provided with a rubber O-ring. On the front of the button is a flat metal actuator, surrounded by a plastic LED ring. On the back there are 3 contacts for the switch; C (common), NO (normally open) and NC (normally closed) and 2 contacts for the LED ring (+ and -). Connect 12VDC to the LED ring to have it light up nicely, there's a built in resistor!
Delivery within 2-3 weeks
+ −
Add to wish list
PBS-LED-200WH 12V 16mm with White LED Ring Waterproof Latching Pushbutton Switch
US$6.35
These illuminated waterproof chrome-plated metal pushbuttons give a professional appearance to any project. These are latching pushbuttons. When you press it the 'normally-open' contact shorts to the common contact and the ‘normally closed’ contact button opens. The switches will stay in this position until the button is push again. Waterproofing is provided with a rubber O-ring. On the front of the button is a flat metal actuator, surrounded by a plastic LED ring. On the back there are 3 contacts for the switch; C (common), NO (normally open) and NC (normally closed) and 2 contacts for the LED ring (+ and -). Connect 12VDC to the LED ring to have it light up nicely, there's a built in resistor!
Delivery within 2-3 weeks
+ −
Add to wish list
WIFI-ESP8266-R ESP8266 WIFI Microcontroller with 120VAC 12A Relay Module
US$11.19
If you need a microcontroller that can handle the automation of your electric devices wirelessly, look no further. This breakout board includes an ESP8266 with built-in WIFI along with a relay module that is capable of supplying 12A at 125VAC. Simply, you can send commands via WIFI from your phone or computer to control the included relay, in addition to receiving data from sensors that are connected to the ESP8266.
In stock
+ −
Add to wish list
FRL263A012/04CS Relay ½HP 4PDT 12VAC 3A Solder Lugs
US$10.99
Features: Rugged construction for high reliability. See-through dust cover. Available socket R95-110 sold separately for FRL263A012/04CS.
In stock
+ −
Add to wish list
SEC-90 Embedded Normally-Closed Magnetic Switch for Access Control
US$2.23

Recessed magnetic door switches are made with the same magnetic reed switches used for surface-mount alarm contacts. Instead of a rectangular housing, recessed alarm contacts have a cylindrical case. This makes them easy to install, just by drilling a hole of the proper diameter. The magnets are also designed with the same type of cylindrical housing.

In stock
+ −
Add to wish list
MOT-PCA9685-A I2C PCA9685 16-Channel PWM / 12 – bit Servo Driver
US$12.53
This module allows users to connect to Raspberry pi or Arduino to control multiple motors using i2c protocol. You can also drive LEDs with the module and supply external voltage and current. You can drive up to 16 PWM outputs using four wires from your microcontroller. You can buy a bunch and have up to 6 address to select resulting in 62 modules with a total of 992 outputs.
Delivery within 2-3 weeks
+ −
Add to wish list
KN-MF-A03 Control and Instrument Knob
US$2.72
This knob has an excellent industrial look and feel with a chrome finish on top of a black plastic body knob with positive finger grips. A white line position indicator makes it visually easy to see its position on the 0-100 scale plate that is included. Has a solid set screw attachment for standard potentiometer shafts.
In stock
+ −
Add to wish list
TUBE-S-6 One Meter 6x9mm Flexible Food Grade Silicone Hose
US$5.49
This translucent silicone tubing can be used for pumping liquids and chemicals. It can be used with the MOT-RS-360A peristaltic pump.
In stock
+ −
Add to wish list
SERVO-DISC 25 Teeth Metal Servo Disc for MG995 MG996 Servos
US$1.58
This product is a metal servo attachment that allows you to mount larger flat attachments to your MG995/MG996 servos. It has four 3mm holes that allow the disc to be fastened securely against the attachment. M3 screws are included for easy installation.
In stock
+ −
Add to wish list
MOT-ACT100 12VDC 100mm Stroke 500N 20MM/s Aluminum Shaft Linear Actuator
US$64.95
This device is a heavy duty actuator that is capable of extending/retracting its arm with high amount of torque. It is powered via a large and powerful 12 VDC geared motor that allows for its arm to move back and forth. It can be used to open doors, windows, lift objects etc. Note: This actuator has a safety feature that prevents the arm from moving any further when reaching maximum or minimum length to prevent damaging the gears. Inverting the polarity allows you to change directions.
In stock
+ −
Add to wish list
130 - 144
138 139 140 141 142 143 144 145 146 147 148 149 150 151 152
146 - 160