Our Brands

Electromechanical

123 - 137
131 132 133 134 135 136 137 138 139 140 141 142 143 144 145
139 - 153
Newest Items First
15 Per Page
TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
US$17.92
This version of our TB67S249FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. The TB67S249FTG has a wide operating voltage range of 10 V to 47 V, and our carrier board can deliver approximately 1.6 A per phase continuously without a heat sink or forced air flow (up to 4.5 A peak).
Delivery within 2-3 weeks
+ −
Add to wish list
DC Gear Motor w/ Double Axle
US$3.74
This DC gear motor with a double axle is perfect for the beginner hobbyist venture into motorized robotic platforms. Comes assembled with a worm gear drive coupling to the double axle making for a simple addition to mobilize a basic platform. The motor can be driven with 3 or 6 volts DC.
In stock
+ −
Add to wish list
STSPIN820 Stepper Motor Driver Carrier (Header Pins Soldered)
US$13.96
This version of our STSPIN820 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard.
In stock
+ −
Add to wish list
TB67S279FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
US$15.20
This version of our TB67S279FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. The TB67S279FTG has a wide operating voltage range of 10 V to 47 V, and our carrier board can deliver approximately 1.1 A per phase continuously without a heat sink or forced air flow (up to 2 A peak).
In stock
+ −
Add to wish list
Micro Servo with Position Feedback FB90
US$11.13
This version of the FS90 micro servo from FEETECH is specially modified to provide access to the feedback potentiometer through a fourth (green) wire, allowing you to directly measure the position of the output. This extra information enables more complex robotics applications, such as determining when the servo has reached its target, detecting when the output is blocked, or implementing your own higher-level closed-loop position control.
In stock
+ −
Add to wish list
FEETECH Standard Servo FS5103B-FB with Position Feedback
US$19.97
This version of the FS5103B standard servo from FEETECH is specially modified to provide access to the feedback potentiometer through a fourth (green) wire, allowing you to directly measure the position of the output. This extra information enables more complex robotics applications, such as determining when the servo has reached its target, detecting when the output is blocked, or implementing your own higher-level closed-loop position control.
Delivery within 2-3 weeks
+ −
Add to wish list
EF09083 360 Digital Servo(EF90D) with wheel and tire
US$8.96
360 Digital Servo(EF90D) with wheel and tire is a kind of 360 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and uses pulse width to adjust speed of the servo rotation, which also can be used to make small robot modules, mechanical arm modules and intelligent car modules.
In stock
+ −
Add to wish list
JGA25-370-6V100-E 6VDC 100 RPM DC Gear Motor with Magnetic Encoder 
US$17.97
This product is a DC gear motor that contains a Magnetic Encoder solder to the end leads of the motor. These motors will use magnetic hall effect sensor to determine the position of the motor. Excellent for position and control systems or related projects.
In stock
+ −
Add to wish list
MOT-PROP-L 60mm Propeller for 2mm shaft motors
US$0.49
This is a propeller that is designed to slide into any 2mm motor shaft. Excellent for science projects where you would want a fan to spin. 
Recommend to use on the MOT-500 Motors.
In stock
+ −
Add to wish list
MOT-PROP-S 40mm Propeller for 2mm shaft motors
US$0.49
This is a propeller that is designed to slide into any 2mm motor shaft. Excellent for science projects where you would want a fan to spin. 
Recommend to use on the MOT-500 Motors.
In stock
+ −
Add to wish list
BLT-GT2-S-10MM-1M GT2, 2mm Pitch, 10mm wide, 1meter long open-ended Belt
US$4.98
Excellent for linear movement of x and y axis components. The grooves are 2mm and work effectively on 2mm pitch GT2 tooth pulleys.
In stock
+ −
Add to wish list
PBS-LAS1-24V-R Latching Power Switch with Illuminated Power On Icon
US$9.89
This Switch is a high quality plastic switch that is designed to operate at 24VDC or 24VAC at 1amp, do not exceed this operating specifications!
In stock
+ −
Add to wish list
MOT-H-JGY370 JGY370 Worm Geared DC Motor L Shape Corner Bracket
US$6.32
This L bracket was specifically designed for use in DIY projects with JGY370 motor. Check our related products for the motors that are designed for this bracket
In stock
+ −
Add to wish list
HS-53 Hitec Super-Economy Feather, Nylon Gear Servo
US$15.39
The HS-53 is our economical, feather servo designed to compete head to head with the influx of low cost servos while still maintaining Hitec’s renowned quality. Designed with a durable nylon gear train and an efficient three-pole cored motor, this light-weight servo is a terrific fit for small power planes and gliders. Priced right, it is sure to become a universal favorite!
In stock
+ −
Add to wish list
HS-225BB Hitec Mighty Mini Servo
US$26.59
The analog HS-225BB represents a good value with performance that rivals other larger and more expensive servos. Ideal for applications that call for a small, lightweight, high speed, high torque servo, the HS-225BB high performance mini servo features a top ball bearing and is built with state-of-the-art SMT technology.
In stock
+ −
Add to wish list
123 - 137
131 132 133 134 135 136 137 138 139 140 141 142 143 144 145
139 - 153