Electromechanical

US$10.99
This pushbutton EMERGENCY STOP SWITCH has two sets of contacts N/O and N/C. Pushing the switch latches the contacts in the opposite condition. Turning the button releases the latched condition to return to normal operation. Contacts are provided with screw terminals. Built in LED Illumination.
In stock
+
Add to wish list

US$10.99
This pushbutton EMERGENCY STOP SWITCH has two sets of contacts N/O and N/C. Pushing the switch latches the contacts in the opposite condition. Turning the button releases the latched condition to return to normal operation. Contacts are provided with screw terminals. Built in LED Illumination.
In stock
+
Add to wish list

US$0.87
This is a miniature Momentary Push button with Normally Open contacts. Green switch button is 7.25mm diameter.
In stock
+
Add to wish list

US$0.87
This is a miniature Momentary Push button with Normally Open contacts. Red switch button is 7.25mm diameter.
In stock
+
Add to wish list

US$1.09
This is a miniature Momentary Push button with Normally Open contacts. Yellow switch button is 6mm diameter.
In stock
+
Add to wish list

US$1.09
This is a miniature Momentary Push button with Normally Open contacts. Green switch button is 6mm diameter.
In stock
+
Add to wish list

US$1.09
This is a miniature Momentary Push button with Normally Open contacts. Red switch button is 6mm diameter.
In stock
+
Add to wish list

US$1.09
This is a miniature hinge roller lever Micro Switch SPDT rated at 5A 125V. Widely used for computer mouse reset button switch KW11-N.
In stock
+
Add to wish list

US$4.99
This L bracket with U-slot was specifically designed for use in DIY CNC machines. The bracket supports the 775 DC motor. (Product: MOT-775 and CNC-KIT-01-S). Two M4 hardware screws are included.
In stock
+
Add to wish list

US$5.49
This is an inexpensive two way audio crossover with jumper selectable treble and bass boost. Four pin header without a jumper produces straight not boosted audio frequency divide at 3800 Hz. S1 jumper installed provides bass boost. S2 jumper installed provides treble boost. S1 and S2 jumpers installed provide both bass and treble boost. Crossover frequency is 3800 Hz. Based on JBL WM-008 crossover design.
In stock
+
Add to wish list

US$11.13
Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit.
In stock
+
Add to wish list

US$11.13
Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit.
In stock
+
Add to wish list

US$4.50
This low profile PCB mounting power relay is ideal for incorporating into miniature electronic equipment. This relay is DPDT with a 24VDC coil and contacts rated at 16A @250VAC. Approvals include VDE (EN61810-1), UL508 and CSA22.2.
In stock
+
Add to wish list

US$4.50
This low profile PCB mounting power relay is ideal for incorporating into miniature electronic equipment. This relay is DPDT with a 12VDC coil and contacts rated at 16A @250VAC. Approvals include VDE (EN61810-1), UL508 and CSA22.2.
In stock
+
Add to wish list

US$1.99
This low profile PCB mounting relay is ideal for incorporating into miniature electronic equipment. This relay is SPST with a 24VDC coil and contacts rated at 5A @250VAC. Highly efficient magnetic circuit for high sensitivity (200 mW).
In stock
+
Add to wish list