Electromechanical

US$0.89
0ZRG0185FF1E PPTC Fuse Resettable 1.85A Radial 30V   Hold Current: 1.85 A Maximum Voltage:   30 V Trip Current: 3.7 A  Current Rating - Max:...
In stock
+
Add to wish list

US$18.15
A NEMA 17 stepper motor is a stepper motor with a 1.7 x 1.7 inch (42.3 x 42.3 mm) faceplate. The NEMA 17 is larger and generally heavier than for example a NEMA 14, but this also means it has more room to put a higher torque.
In stock
+
Add to wish list

US$31.80
DM556 Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal.
In stock
+
Add to wish list

US$36.32
This pump is a great choice for motor homes and offroad rigs. It has a pressure switch that automatically cuts off the pump. Simply wire up the pump to a 24VDC source then hook up a valve on the outlet.
In stock
+
Add to wish list

US$36.35
This USB capacitor microphone is a great choice for both vocal and instruments as well as for creating podcasts and voiceovers for videos.
In stock
+
Add to wish list

US$11.33
This pump is the perfect choice for any project that requires liquid to be moved from one container with a maximum depth of 3 meters to another. The pump requires hoses that you can cut to your requirements. The pump should be powered by a 12VDC 400mA power supply.
In stock
+
Add to wish list

US$3.99
This diaphragm pump is the perfect choice for any project that requires liquid to be moved from one place to another. The pump requires a hose that you can cut to your requirements. The pump gets its power via USB. Recommended hose : 6x9mm.
In stock
+
Add to wish list

US$15.42
Category: two-phase stepper motor. Step angle: 1.8°. Body length: 40mm. Rated current: 1.7A/Phase. Phase resistance: 2.4Ω. Phase inductance: 3.7mH. Holding torque: 0.45N.m. Rotor inertia: 54(g.c㎡). Weight: 0.3kg. Compatible driver: SMD258C, Stepper Motor HAT.
In stock
+
Add to wish list

US$9.05
TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision.
In stock
+
Add to wish list

US$163.75

This is a Nema 23 stepper motor with a planetary gearbox that increases the torque and step angle precision. The reduced step angle is extremely useful when the stepper needs to rotate very precisely and slowly.

In stock
+
Add to wish list

US$154.65

This is a Nema 23 stepper motor with a planetary gearbox that increases the torque and step angle precision. The reduced step angle is extremely useful when the stepper needs to rotate very precisely and slowly.

In stock
+
Add to wish list

US$18.15
This is a updated version TB6600 4A two-phase stepper motor driver. Positive and negative control can be achieved.  Select the 7-step subdivision control (1, 2/A, 2/B, 4, 8, 16, 32) through the 3-digit DIP switch.  Suitable for driving 57, 42 two-phase, four-phase hybrid stepping motors. Achieve low vibration, low noise, high speed effect drive motor.
In stock
+
Add to wish list

US$16.32
Nema 17, 42 stepper motor thin body 22mm, 0.09Nm 1.8 degrees two-phase four-wire thickness 22
In stock
+
Add to wish list

US$13.95
This is an Electromagnetic Lock Tap B, with this Electromagnetic Lock, you can install it on your door, window and so on. It is a good choice in your smart home project.
In stock
+
Add to wish list

US$27.23
This is an Electromagnetic Lock Kit, which includes an Electromagnetic Lock, a 1 Channel RF Remote Controller (a Relay receive module, two buttons RF Remote Controller) and a 12V DC adapter. With this kit, you can make a smart lock for your door, window and so on.
In stock
+
Add to wish list