Electromechanical

US$4.39
These illuminated waterproof chrome-plated metal pushbuttons give a professional appearance to any project. When you press it the 'normally-open' contact shorts to the common contact and the ‘normally closed’ contact button opens. The contacts will stay in this position momentarily until the button is released. Waterproofing is provided with a rubber O-ring. On the front of the button is a flat metal actuator, surrounded by a plastic LED ring. On the back there are 3 contacts for the switch; C (common), NO (normally open) and NC (normally closed) and 2 contacts for the LED ring (+ and -). Connect 24VDC to the LED ring to have it light up nicely, there's a built in resistor! The switch and LED are separated, so you could wire the LED to turn on when the button is pressed or have it turned on independent of the switch, as you wish!
In stock
+
Add to wish list

US$4.39
These illuminated waterproof chrome-plated metal pushbuttons give a professional appearance to any project. When you press it the 'normally-open' contact shorts to the common contact and the ‘normally closed’ contact button opens. The contacts will stay in this position momentarily until the button is released. Waterproofing is provided with a rubber O-ring. On the front of the button is a flat metal actuator, surrounded by a plastic LED ring. On the back there are 3 contacts for the switch; C (common), NO (normally open) and NC (normally closed) and 2 contacts for the LED ring (+ and -). Connect 24VDC to the LED ring to have it light up nicely, there's a built in resistor! The switch and LED are separated, so you could wire the LED to turn on when the button is pressed or have it turned on independent of the switch, as you wish!
In stock
+
Add to wish list

US$4.39
These illuminated waterproof chrome-plated metal pushbuttons give a professional appearance to any project. When you press it the 'normally-open' contact shorts to the common contact and the ‘normally closed’ contact button opens. The contacts will stay in this position momentarily until the button is released. Waterproofing is provided with a rubber O-ring. On the front of the button is a flat metal actuator, surrounded by a plastic LED ring. On the back there are 3 contacts for the switch; C (common), NO (normally open) and NC (normally closed) and 2 contacts for the LED ring (+ and -). Connect 24VDC to the LED ring to have it light up nicely, there's a built in resistor!
In stock
+
Add to wish list

US$4.39
These illuminated waterproof chrome-plated metal pushbuttons give a professional appearance to any project. When you press it the 'normally-open' contact shorts to the common contact and the ‘normally closed’ contact button opens. The contacts will stay in this position momentarily until the button is released. Waterproofing is provided with a rubber O-ring. On the front of the button is a flat metal actuator, surrounded by a plastic LED ring. On the back there are 3 contacts for the switch; C (common), NO (normally open) and NC (normally closed) and 2 contacts for the LED ring (+ and -). Connect 24VDC to the LED ring to have it light up nicely, there's a built in resistor! The switch and LED are separated, so you could wire the LED to turn on when the button is pressed or have it turned on independent of the switch, as you wish!
In stock
+
Add to wish list

US$4.39
These illuminated waterproof chrome-plated metal pushbuttons give a professional appearance to any project. When you press it the 'normally-open' contact shorts to the common contact and the ‘normally closed’ contact button opens. The contacts will stay in this position momentarily until the button is released. Waterproofing is provided with a rubber O-ring. On the front of the button is a flat metal actuator, surrounded by a plastic LED ring. On the back there are 3 contacts for the switch; C (common), NO (normally open) and NC (normally closed) and 2 contacts for the LED ring (+ and -). Connect 24VDC to the LED ring to have it light up nicely, there's a built in resistor!
In stock
+
Add to wish list

US$27.24
This coin acceptor will take three different kinds of coin! Whether you're building your own arcade cabinet or just charging admission to your house, this programmable coin acceptor makes it easy to monetize your next project. The sensors in this coin acceptor use the thickness, diameter and fall time of the coins to identify them and it's fully programmable so you're not limited to any particular type of currency.
In stock
+
Add to wish list

US$8.99
This is a mini clip-on microphone for general recording with 3.5mm 4 pin Audio connector.
In stock
+
Add to wish list

US$5.65
This device includes a PWM module that features an adjustable potentiometer and knob, screw-terminal blocks.
In stock
+
Add to wish list

US$16.32
L298 2Amp Motor Driver Shield for Arduino is based on L298 motor driver integrated circuit, a full- bridge motor driver.
In stock
+
Add to wish list

US$0.89
0ZRG0185FF1E PPTC Fuse Resettable 1.85A Radial 30V   Hold Current: 1.85 A Maximum Voltage:   30 V Trip Current: 3.7 A  Current Rating - Max:...
In stock
+
Add to wish list

US$18.15
A NEMA 17 stepper motor is a stepper motor with a 1.7 x 1.7 inch (42.3 x 42.3 mm) faceplate. The NEMA 17 is larger and generally heavier than for example a NEMA 14, but this also means it has more room to put a higher torque.
In stock
+
Add to wish list

US$31.80
DM556 Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal.
In stock
+
Add to wish list

US$36.32
This pump is a great choice for motor homes and offroad rigs. It has a pressure switch that automatically cuts off the pump. Simply wire up the pump to a 24VDC source then hook up a valve on the outlet.
In stock
+
Add to wish list

US$36.35
This USB capacitor microphone is a great choice for both vocal and instruments as well as for creating podcasts and voiceovers for videos.
In stock
+
Add to wish list

US$11.33
This pump is the perfect choice for any project that requires liquid to be moved from one container with a maximum depth of 3 meters to another. The pump requires hoses that you can cut to your requirements. The pump should be powered by a 12VDC 400mA power supply.
In stock
+
Add to wish list