DSS-M15S 270° 15KG DF Metal Servo with Analog Feedback
DSS-M15S servos have been well received by customers in these years. It has extremely wide angle range control, huge load capacity and excellent quality. This DSS-M15S with analog feedback has broken its internal potentiometer signal. This is an analog signal with 0~3.3V feedback. You can connect it to MCU to realize close-loop feedback control.
DSS-M15S 270° Metal servo with feedback is compatible with Arduino Servo library. You can drive it with Arduino Board and read the angle value from analog side.
.jpg?1524780845894)
Angle-Analog Value
.jpg?1524780879191)
SPECIFICATION
Electronic specifications
- Operating voltage: 4.8-7.2V
- Operating speed (no load): 0.18 sec/60 degrees
- Resting current: 80mA
- Locking torque: 13.5KG*cm
- Stall current: 1.8A
- Standby current: 4mA
- Operating speed (no load): 0.16sec/60 degrees
- Resting current: 100mA
- Locking torque: 15KG*cm
- Stall current: 2A
- Standby current: 5mA
- Gear material: metal gear
- Operating angle: 270 degrees
- Wiring gauge: 28PVC
- Data line length: 320mm
- Gear bracket spline: 25T/5.80
- Gear ratio: 310:1
- Size: 54.5*20*47.5mm
- Feedback signal: 0-3.3V
- Control signal: RC PWM
- Pulse range: 500-2500 us
- Median signal value: 1500us
- Clockwise rotation: <1500us
- Control frequency: 50-330Hz (Arduion compatible)
DOCUMENTS
SHIPPING LIST
- DSS-M15S 270° servo with analog feedback x1
- Crossed horn x1
- Long straight horn x1
- Short straight horn x1
- M2*8 self-tapping screws and gasket x5
- M3*6 screw x1
WARNING
