The FeeTech 7.4V 65kg 360 Degree Magnetic Encoders Steel Gear Servo comes with a steel gear. It runs on an operating voltage range between 4.8 V - 8.4 V and Idle current (at stopped): 30 mA at 7.4 V. The pulse width range is 500 ~ 2.500 μ sec.
Specifications:
- Gear Type: Steel
- Limit angle: No limit
- Bearing: Ball bearings
- Horn gear spline: 15T / 7.6 mm
- Gear Ratio: 1:305
- Case: Aluminum
- Motor: Core Motor
- Operating Voltage Range: 4.8 - 8.4 V
- Idle current (at stopped): 30 mA at 7.4 V
- No-load speed: 0.227 sec / 60° (44 RPM) at 7.4 V
- Running current (at no-load): 300 mA at 7.4 V
- Peak stall torque: 65 kg.cm at 7.4 V
- Rated torque: 21.5 kg.cm at 7.4 V
- Stall current: 10.2 A at 7.4 V
- Command signal: Pulse width modulation
- Control System Type: Digital comparator
- Pulse width range: 500 ~ 2.500 μ sec
- Stop position: 1.500 μ sec
- Running degree: 360° (at 500 - 2.500 μsec)
- Dead band width: ≤4 μ sec
- Rotating direction: Counterclockwise (1.500 - 2.500 μ sec)
- Electronic Protection: Stall 4 sec
- Temperature protection: >70 °C
- Storage Temperature Range: -30 ~ 80 °C
- Operating Temperature Range: -20 ~ 60 °C
- Weight: 235.2 g ± 1 g
Dimensions:
WARNING
