This is a product is a simple and easy-to-use knob controller for servo motors. It has two channels so the motors can be controlled simultaneously or separately.
Features
- The Dual Servos Knob Serial Port Control Board Futaba MG995 SG90 Steering Gear Debugging Module is a plug-and-play, easy-to-use servo controller with knob adjustment, reply function, serial command control, and three servo control modes.
- Support manual mode and return to medium mode, switch by button, with mode indicator.
Support knob adjustment or serial command control in manual mode. - The serial port command control can use the matching host computer software or connect to the external MCU.
Specifications
- The onboard stable 8-bit MCU is used to generate high-resolution PWM signals with precise control.
- Steering gear control accuracy: 0.09 degrees (that is, PWM minimum change value 1us)
- Support steering gear with a control period of 20ms and pulse width in the range of 0.5-2.5ms
- Users can directly use a 2S lithium battery charging head to debug and return to the steering gear.
- Power supply voltage range: 5-9V (Based on the actual servo supply voltage)
WARNING
