12V 30W 600RPM High Torque DC Motor
This DC motor provides longetivity and high torque for your needs. The motor body and the gear head are detachable; therefore, it is possible to service and lubricate the gears if needed. The motor output shaft is a pinion gear and the gear head output shaft is a round D-cut.
Please consult the datasheet under the "attachments" tab.
Specifications:
- Input Voltage: 12 VDC
- No Load Current: 0.8 A
- Stall Current: 3.5 A
- Max. Power Consumption: 30 W
- Max. Motor RPM: 1800 RPM (pre-gear head)
- Gear Reduction Ratio: 3:1
- Max. Reduced RPM: 600 RPM (post-gear head)
- Stall Torque: 0.08 N.m / 0.06 lb-ft / 0.84 Kg.cm
- Max. Permissible Torque on Gear Head: 3 N.m / 2.2 lb-ft / 30.6 Kg.cm
- Speed Tolerance: ±15%
- Torque Tolerance: ±20%
- Assembly Dimensions: 146 x 60 x 60 mm / 5.75 x 2.36 x 2.36"
- Gear Head Flange Dimensions: 60 x 60 mm / 2.36 x 2.36"
- Output Shaft Dimensions: 27 x 8 mm / 1.06 x 0.32" (Height x Diameter)
- Mounting Screw Size: M4
- Weight: 1.28 Kg / 2.82 lbs
- Wire Length: 350 mm
- Wire Gauge: 10 AWG
- Dielectric Strength: 1.5 kVAC for one minute
- Temperature Rise Under Load: up to 80°C / 176°F
- Best Ambient Temperature: -10 to 40°C / 14 to 104°F (non-freezing)
- Best Ambient Humidity: 85% or less (non-condensing)
- Insulation Resistance: 100 MΏ Min. @ 500VDC
- Insulation Class: B (130°C / 266°F)
WARNING
