This geared motor is a precision geared motor used in medical equipment, and its tail also has a plastic leaf that can be installed with speed feedback, and the motor uses rare earth strong magnets M10 micro motor, its rated voltage is DC2.5V, but it can also be pressurized to DC3V, DC3.7V, DC4.2V, or even DC5V.
This M10 micro motor uses precious metal brushes and precious metal commutators, but not neodymium iron boron materials, yet the magnetic force is very good. It should be noted that the outer casing is made of materials that can isolate the magnetism because this geared motor is used in medical equipment, where magnetism leakage is not permitted so as not to affect the functions of other electronic components. And this geared motor should also need precise operation control, so the tail of the motor also has a plastic leaf that can be equipped with speed feedback.
Specifications
- Planetary gearbox outer diameter: 9.9 MM
- Motor specifications: 8 *10*12 MM (M10 motor)
- Geared motor height: 19.5 MM (motor + gear box)
- Output shaft: gear with an outer diameter of 5.35 MM (11 teeth)
- Reduction ratio: 1:171
- Weight: 4 grams
- Rated voltage: DC2.5V
- No-load current: 40 MA
- No-load speed: 92 RPM
- Rated torque: 9.8 mN.m
- Maximum torque: 37.2 mN.m
It is not recommended to work continuously for a long time at DC5V.
The following chart measures the current and motor speed at other voltages:
| Voltage | Current | Speed |
| DC 3.0V | 42 mA | 110 rpm |
| DC 3.7V | 48 mA | 135 rpm |
| DC 4.2V | 52 mA | 154 rpm |
| DC 5.0V | 58 mA | 180 rpm |
Shipping List
- 1 x Metal Brush Motor
WARNING
