Our Brands

DC Motors

ABRA stocks DC Motors ideal for schools, industry, technicians and hobbyists.
1 2 3 4 5 6 7 8
Newest Items First
16 Per Page
MD5-1885 12 Volt DC Motor 740mA - 9820 RPM
CA$6.97

Nominal voltage: 12VDC;Voltage range: 6 - 18VDC;Current @ maximum efficiency: 0.74A;Speed @ maximum efficiency: 9820 RPM;Torque @ maximum efficiency: 53.5 g-cm;Efficiency: 60.7%;Terminal type: 0.11" solder tabs;Shaft diameter: 0.091";Shaft length: 0.622";Size: 1.082" diameter x 1.279" depth;Screw Mount Dimensions: M2.6 x 0.45;

In stock
+ −
Add to wish list
SW-MOT Pre-Wired DC Motor Reversing Switch
CA$3.37
This pre-wired switch provides a simple to use or demonstrate DC motor reversing switch for educators and hobbyists.  Comes pre-wired in a plastic casing that can be screwed down to hold it in place.  Has two short and two long red and black wires. Hook up the short wires to a battery and the long wires to a dc motor to complete the motor reversing circuit. Center position is OFF.  The switch is removable from the plastic casing for other uses.
In stock
+ −
Add to wish list
MOT-GEAR-DC10 6V 20:1 Geared DC Motor (2mm Shaft)
CA$4.60
This brushed DC motor gear kit is perfect for students and hobbyists for their DIY kits. It is capable of running at 3VDC for better longevity of the motor at the cost of losing half the amount of speed and torque, compared to running it at 6VDC. That said, the mounted gears give a reduction ratio of 20:1 which means you will get about 20 times the amount of torque you would normally get from the motor itself.
In stock
+ −
Add to wish list
MOT-GEAR-DC20 6VDC 2:1 Geared DC Motor (2mm Shaft)
CA$7.62
This brushed DC motor gear kit is perfect for students and hobbyists for their DIY kits. It is capable of running at 3VDC for better longevity of the motor at the cost of losing half the amount of speed and torque, compared to running it at 6VDC. That said, the mounted gears give a reduction ratio of 2:1 which means you will get about 20 times the amount of torque you would normally get from the motor itself.
In stock
+ −
Add to wish list
MOT-DC-130 6V Small DC Motor (2mm shaft)
CA$2.45
This brushed DC motor is perfect for students and hobbyists for their DIY kits or simply to demonstrate the functionality of a DC motor. It is capable of running at 3VDC for better longevity of the motor at the cost of losing half the amount of speed and torque compared to running it at 6VDC.
In stock
+ −
Add to wish list
MOT-DC-170 3VDC Small Biaxial DC Motor
CA$1.85
This brushed DC motor is perfect for students and hobbyists for their DIY kits. Unlike regular DC motors, this motor has a shaft that extends on both ends which makes it ideal for projects where one-sided shaft is simply not enough.
In stock
+ −
Add to wish list
MOT-DC-180 9V DC Motor With Retention Clip
CA$2.00
This brushed DC motor is perfect for students and hobbyists for their DIY kits. This motor comes with a retainer clip mounted on the shaft which makes it ideal for locking in wheels or any attachment on the shaft to prevent them from slipping and falling off.
In stock
+ −
Add to wish list
MOT-DC-190 3.7VDC High Speed 15000 RPM Small Brushed Metal DC Motor
CA$2.08
This brushed DC motor is perfect for students and hobbyists for their DIY kits or simply to demonstrate the functionality of a DC motor. Unlike regular DC motors, It is capable of reaching more than 15000 RPM at 3.7VDC which makes it ideal to be used in RC planes, boats, cars etc..
In stock
+ −
Add to wish list
MOT-DC-200 18V 11000 RPM DC Motor (Drill Motor)
CA$12.23
This brushed DC motor is perfect for hobbyists and students for their projects and DIY kits. Because of its wide operating voltage range, it allows it to be used in applications where the speed can be adjusted smoothly and precisely hence it is commonly used for drill-guns and drill-presses.
In stock
+ −
Add to wish list
MOT-DC-260 6V Small DC Motor (2mm shaft)
CA$3.46
This brushed DC motor is perfect for students and hobbyists for their DIY kits or simply to demonstrate the functionality of a DC motor. It is capable of running at 3VDC for better longevity of the motor at the cost of losing half the amount of speed and torque compared to running it at 6VDC.
In stock
+ −
Add to wish list
MOT-DC-265 6V Small DC Motor (2mm Shaft)
CA$4.38
This brushed DC motor is perfect for students and hobbyists for their DIY kits or simply to demonstrate the functionality of a DC motor. It is capable of running at 3VDC for better longevity of the motor at the cost of losing half the amount of speed and torque compared to running it at 6VDC.
In stock
+ −
Add to wish list
MOT-DC-280 Small 3 – 4.5V DC Motor (2mm Shaft)
CA$1.80
This brushed DC motor is perfect for students and hobbyists for their DIY kits or simply to demonstrate the functionality of a DC motor.
In stock
+ −
Add to wish list
MOT-510 Motor, DC 3V-6V 2000 RPM
CA$1.37
This device is a small 3-6VDC motor ideal for robotic cars, small fans, or other DIY projects. Length: 25mm. Diameter: 21mm. Shaft Diameter: 2mm. Shaft Length: 9mm. Voltage: 3-5V. Solder tabs.
In stock
+ −
Add to wish list
MOT-775 7k RPM 775 Spindle Motor for 3-Axis CNC kit
CA$16.95
This is a replacement product for the CNC-KIT-01. Excellent for attaching drill bits for milling, drilling and etching! Note: does not include cable.
In stock
+ −
Add to wish list
AB-850647 Motor, 6VDC Solder terminals 17,000 rpm
CA$3.27
Voltage Range: 3V-6V. Nominal Voltage: 6V. Current: 0.26A. RPM: 17,000 max. Torque: 20.72g/cm. Shaft Dia.: 2mm. Shaft Length: 6.5mm. Size: 23.5mm dia. x 27mm length.
In stock
+ −
Add to wish list
MOT-500 DC Hobby Motor
CA$1.31
This DC micro motor is perfect for students and hobbyists to demonstrate the functioning of a DC motor.
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8