Buzzers

Piezo Buzzer vs Piezo Transducer
A Piezo Buzzer will output a continuous tone when the rated DC voltage is applied to its terminals. The Piezo Buzzer contains an internal oscillator to produce a typical 1-2 KHz tone. A Piezo Transducer is really a speaker that requires an audio oscillating tone be applied to its terminals to produce a sound. No sound will be produced when a DC voltage is applied.

1 2 3 4 5
CA$3.53

Our Best Selling Piezo Buzzer. Voltage: 4 - 20 volts DC Color: Black Dimensions: 7/8" x 11/16" high.

In stock
+
Add to wish list

CA$2.70

Buzzer 4-8 VDC. 100mm leads Current: 35mA Output: 85db @ 20cm Freq.: 2KHz.

In stock
+
Add to wish list

CA$2.70

Buzzer 8-16 VDC. 100mm leads Current: 35mA Output: 85db @ 20cm Freq.: 2KHz.

In stock
+
Add to wish list

CA$2.70

Panel Mount Buzzer with 100mm leads. Input voltage 4 ~ 8 VDC. Max. Rated Current:: 33mA/6VDC. Resonant Frequency: 400. 

In stock
+
Add to wish list

CA$2.70

Complete with internal driver. Current: 30mA Sound output: 85db @ 10cm Frequency: 2KHz.

In stock
+
Add to wish list

CA$2.70

Complete with internal driver. Current: 30mA Sound output: 85db @ 10cm Frequency: 2KHz.

In stock
+
Add to wish list

CA$8.30

Input voltage 4 ~ 28 VDC, Tone output Pulsed tone.  Current: 15mA. Sound output: 80db @ 100cm. Frequency: 3.2KHz5.

In stock
+
Add to wish list

CA$2.70

Panel Mount Buzzer with 100mm leads. Input voltage 9 ~ 15 VDC. Max. Rated Current:: 33mA/6VDC. Resonant Frequency: 400. 

In stock
+
Add to wish list

CA$2.70

Panel Mount Buzzer with 100mm leads. Input voltage 15 ~ 27 VDC. Max. Rated Current:: 33mA/6VDC. Resonant Frequency: 400.

In stock
+
Add to wish list

CA$2.76
You can use these for tap or knock sensors pretty easily by reading the voltage on the output. They can also be used for a very small audio transducer such as a buzzer.
In stock
+
Add to wish list

CA$3.00

This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces.

In stock
+
Add to wish list

CA$2.23
This large (30mm diameter) piezo element is nicely enclosed with mounting holes so you can attach easily. Piezo elements convert vibration to voltage or voltage to vibration. 
Delivery within 2-3 weeks
+
Add to wish list

CA$1.63
This 12mm diameter buzzer operates at 5V and is an excellent sound alarm for microprocessor projects.
In stock
+
Add to wish list

CA$2.19
This Piezo transducer module can be used to generate different sounds for robotic projects such as an alarm or proximity detection sound. Requires a sine or square wave drive input signal of 3.3 to 5 volts peak to peak. Comes with a three pin connector and two screw mounting holes for easy assembly into projects.
In stock
+
Add to wish list

CA$1.08
This Piezoelectric element can turn any mechanical energy into electrical energy (AC). For this reason, you can use it as a knock or tap sensor. You can also implement it in any of your Arduino projects by connecting it to the analog inputs of the microcontroller (see link for more details). You can feed the sensor AC voltage as well. This (coupled with the right frequency) can turn the element into a buzzer or speaker. You won’t need to worry about soldering any leads as they come with pre-soldered red and black wires. Note that this sensor in particular has a diameter of 27mm.
In stock
+
Add to wish list
1 2 3 4 5