0.2ml XD-120 Silver Conductive Adhesive for PCB Repair
- This adhesive is made out silver therefore it's conductive and can be used to repair PCB traces and pads.
- Volume: 0.2cc/ml. / 0.006 oz.
How To Use:
1. Apply The Silver Glue / Paste In The Place You Want.
2. After The Desired Tracks Get Covered, Please Allow One Hour For Drying.
3. If You Want It Drying Rapidly, Blow It With a Hair Dryer For 5 - 10 Minutes Will Be Ok.
Small Tips:
Do Not Remove The Needle Before Use, And Twitch Back And Forth To Make The Silver Paint Fully Mixed.
WARNING
