A white, two component, low viscosity potting compound that cures at room temperature to a soft pliable rubber. RTV 11 SILICONE, TWO PART (RATIO 200:1), WHITE, FLOWABLE FOR POTTING HIGH VOLTAGE APPLICATIONS, SS4155-P PRIMER REQUIRED.
A clear, two component, low viscosity potting compound that cures at room temperature to a soft pliable rubber. RTV 12A SILICONE, TWO-PART (RATIO 20:1), CLEAR, LOW VISCOSITY, NO PRIMER REQUIRED, RTV12C CURING AGENT REQUIRED. Will cure in deep sections. The excellent electrical properties make it a candidate material for both high and low voltage electrical assemblies. Cushions against mechanical shock and vibration. The product comes complete with catalyst DBT.
Excellent for potting and encapsulating electric motors and transformers. RTV 60 SILICONE, TWO-PART (RATIO 200:1), RED, POURABLE, HIGH TEMP., SS4155-1P PRIMER REQUIRED. Also used for fabrication of rubber parts and casting molds for low-melting point metals. Recommended for aerospace applications and as a thermal insulator. Excellent retention of elastomeric properties at temperatures from -54°C to 260°C (-65°F to 500°F) continuously, and up to 316°C (600°F) for short periods of time.
Excellent for insulating, sealing, bonding and formed-in-place gaskets. Can be applied to vertical and overhead surfaces. Not for use in delicate electrical and electronic applications in which corrosion of copper, brass, or other sensitive metals is undesirable.
Excellent for insulating, sealing, bonding and formed-in-place gaskets. Can be applied to vertical and overhead surfaces. Not for use in delicate electrical and electronic applications in which corrosion of copper, brass, or other sensitive metals is undesirable. Can be used in food contact applications where FDA regulations apply.
Excellent for insulating, sealing, bonding and formed-in-place gaskets. Can be applied to vertical and overhead surfaces.
Non-corrosive. Bond capacitors, resistors and integrated circuits to PCBs' seals exposed wires, faying surfaces, connectors. Offering higher performance qualities over conventional RTV silicones.
Non-corrosive. Bond capacitors, resistors and integrated circuits to PCBs' seals exposed wires, faying surfaces, connectors. Offering higher performance qualities over conventional RTV silicones. MG Chemicals sealants will bond to many clean surfaces without the aid of primers
Excellent in areas that require an extra strength sealing and bonding. Non-corrosive to electronic metals, including copper and brass. Can be applied to vertical or overhead surfaces. Retains elastomeric properties for long periods at temperatures from -60°C to 205°C (75°F to 400°F) and for short periods up to 250°C (500°F).
