100 mm x 120 mm New Prototype Universal Test PCB Kit
This is ABRA's very own unique high quality universal prototype PCB, designed to fulfill any basic electronic connection requirement. It comes with 1740 gold plated pads, some of which are buses and others are individuals. We also provided the slots for Mini USB type B connector, 2.1mm DC jack, on-off switch and DB-09 connector. These components are connected internally so as to eliminate wiring problems. The board can get the input power either from the DC barrel or Mini USB. You can connect any circuit within the board and then get the power supply from the DC jack or Mini USB. The kit also comes with the Resistors and LEDs that can be connected to the buses for operation.
This board is also designed with mounting holes in the corners for better ease of use.
Note:
- To work with the kit, intermediate soldering skills are required (Intermediate-Level Kit).
- SMD type C connector slots are also provided with the board, but Type-C connector is not included in the kit as it requires highly advanced SMD soldering skills.
Specifications:
- Size of the board: 100mm x 120 mm
- Board thickness: 1.6mm
- Board Material: FR-4
- Pad types: Gold plated ENIG
- Spacing per pin or Pitch: 2.54mm/0.1 inch
- Total number of pads: 1740
- M3 Holes for mounting
List of parts included in the kit:
- 1 x Prototype board
- 1 x 3mm Green LED
- 1 x 3mm Red LED
- 1 x 2.1mm DC Jack
- 1 x On-Off Switch
- 1 x Through-hole Mini USB Type B Connector
- 1 x DB-09 female Connector (90 degrees)
- 4 x M3 Brass Hex standoff and Hex nuts
- 6 x Resistors (Two of 3K,10K,1K)
Follow the Pictures attached for a better understanding of the connections and buses of the PCB.
WARNING
