BAT-PB-02 12VDC 2.4A 8000mAh Rechargeable Lithium Power Bank with 2.1mm DC charge/discharge socket
This rechargeable battery bank provides 10.8-12vdc output and has a capacity of 8000mAh. The output voltage is not stable, however using a voltage regulator you can get a solid 12vdc output. The battery is heavy and acts like a power bank. Two leads act as charge and discharge, use either leads for one function only at a time. The leads on the battery bank are 2.1mm dc barrel connectors female and male. The battery bank also has a switch to limit the battery usage when storing. The battery takes approximately 8 hours to charge fully. This unit comes with the charger!
Battery Charging method:
1) Insert the DC barrel jack into the charger provided in the box.
2) Connect the wall adapter into any outlet
3) Press the switch and set it to “I” position to begin charging.
4) Notice on the charge a red LED will appear indicating the charging process beginning on the wall adapter.
5) When 8 hours has transpired, please look at the battery or wall adapter LED to see green or orange.
6) Press the switch to “O” position and disconnect the wall adapter from the outlet.
7) Disconnect the battery from the wall adapter barrel connector and store for future use.
8) When in use press the “I” to allow the battery to discharge.
Specifications:
- Low Battery Voltage: 3.4-4VDC
- Fully charged Voltage: 12VDC
- Rated Capacity: 8000mAh
- Battery Chemistry: Lithium Ion
- Output Voltage: 10.8 – 12.6VDC
- Output Current: 1 – 2.4A
- Lifespan: 500 cycles
- Dimensions: 127 x 65 x 23 mm
WARNING
