Our Brands

Battery Chargers/Testers

1 2 3 4 5 6 7 8
Newest Items First
15 Per Page
BAT-CHARGER5 7.4v-11.1v LiPo 2-3s (cell) Balance charger
CA$21.92
This compact device is a balance charger that can safely charge any 7.4v or 11.1v LiPo batteries. The system will shine a green light to indicate fully charged or a red light to indicate charging in process. There are two ports allowing users to connect either a 2 cell or 3 cell balance charger connector. The device can charge each cell at a rate of 800mA and operates from 110-240VAC.
In stock
+ −
Add to wish list
BAT-CAB-8 8 in 1 Battery Charging Cable T/EC3/JST/Lead/TRX/XT60/FUTABA/TAMIYA to Bullet Connector
CA$19.92
Instead of fumbling around for connectors to attach to your charging station, this cable makes it easy and simple to connect your battery. From one end it offers the 3.5mm Bullet connector that connects into your charging station. The other end offers 8 connectors that you can only connect 1 battery at a time to charge. Do not connect two or more batteries at the same time or it will short circuit.
In stock
+ −
Add to wish list
D-S-L5-C 3.7v LiPo USB Battery Charger
CA$3.84
It is an Asynchronous 5 single cell Lithium Polymer Charger. You can charge together 5 LiPo batteries at the same time that have a Molex 2 pin connector with a max capacity of 750mAh. 
In stock
+ −
Add to wish list
BAT-T-10 LiPo Battery Tester & Low Voltage Buzzer 1S to 8S
CA$12.30
If you ever wanted to find out what the voltage was on your LiPo battery, this little device can measure the voltage and readout the value to indicate when the voltage for a cell is past a setting that you may have set it to. LiPo batteries are happy around 3.7v to 3.2v any lower and it can often never recharge again, any higher and it could be affected by reducing the lifespan of the battery. The speaker will sound when the voltage is too low, offering a reminder to charge the battery.
In stock
+ −
Add to wish list
BAT-T-20 3-cell LiPo battery low-voltage alarm
CA$7.31
Those small modules are made to prevent Lithium-Polymer (LiPo) batteries to lose too much power and get damaged. Six LEDs show you which battery has enough charge and which don’t, and a loud (95dB) alarm starts as soon as one of the batteries attached gets under 3.3V.
In stock
+ −
Add to wish list
BAT-C-10 Micro USB Lithium Battery Charger
CA$7.38
This device is a game changer, portable, small and comes with integrated protection features like over charge/over current cut off and indicators. The input of this device is a micro USB female socket and can be connected directly to a mobile charger, whereas the output you can connect a lithium battery as the output.
In stock
+ −
Add to wish list
BAT-CHARGER2 IMAX B6 Li-Po Balance Charger + AC/DC Adapter
CA$62.75
It is a very advanced smart charger for your LiPo/LiFe, NiCd and NiMH Batteries, capable of  managing 6S Li-ion/LiPo/LiFe and 15S NiCd/NiMH. The Display and straightforward controls make charging high volatile batteries safe and easy.
In stock
+ −
Add to wish list
BAT-CHARGER for 18650 3.7v Li-ion Rechargeable Battery
CA$15.32
When you plug the 18650 battery into the charger, it will show Red LED Light, and Green means in full charging condition.
In stock
+ −
Add to wish list
BAT-CHARGER1 Battery Charger for 26650 18650 14500 Rechargeable Batteries
CA$18.67
Charging slots is capable of monitoring and charging batteries independently. Additionally, yellow and red power/charging status indicator lights could visibly indicate battery status and charging process. It's as simple as insert, detect and charge.
In stock
+ −
Add to wish list
2465-ADA PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A - 1000C
CA$38.37
PowerBoost 1000C is the perfect power supply for your portable project! With a built-in load-sharing battery charger circuit, you'll be able to keep your power-hungry project running even while recharging the battery! This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery, and convert the battery output to 5.2V DC for running your 5V projects.
In stock
+ −
Add to wish list
2124-ADA Adafruit Pro Trinket LiIon/LiPoly Backpack Add-On
CA$10.47
Ideally, this backpack is for use with the 3.3V Pro Trinket, so that the battery voltage (3.7V-4.2V) will get regulated down to 3.3V on the Pro Trinket board. However, many times, you can run a 5V Pro Trinket + accessories off of the ~4V from the LiPoly battery with no problem.
In stock
+ −
Add to wish list
1944-ADA PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA+
1944-ADA PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA+
CA$28.76
This is the perfect power supply for your portable project! With a built-in battery charger circuit, you'll be able to keep your project running even while recharging the battery! This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery, and convert the battery output to 5.2V DC for running your 5V projects.
Delivery within 2-3 weeks
+ −
Add to wish list
1905-ADA Adafruit Mini Lipo w/Mini-B USB Jack - USB LiIon/LiPoly charger
1905-ADA Adafruit Mini Lipo w/Mini-B USB Jack - USB LiIon/LiPoly charger
CA$13.37
This little lipo charger is so small and easy to use you can keep it on your desk or mount it easily into any project! Simply plug it via any MiniUSB cable into a USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. 
In stock
+ −
Add to wish list
1904-ADA Adafruit Micro Lipo w/MicroUSB Jack - USB LiIon/LiPoly charger
1904-ADA Adafruit Micro Lipo w/MicroUSB Jack - USB LiIon/LiPoly charger
CA$13.37
This little lipo charger is so small and easy to use you can keep it on your desk or mount it easily into any project! Simply plug it via any MicroUSB cable into a USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end.
In stock
+ −
Add to wish list
390-ADA USB / DC / Solar Lithium Ion/Polymer charger - v2
390-ADA USB / DC / Solar Lithium Ion/Polymer charger - v2
CA$29.62
NOTE: This product is only designed for use with solar panels sold at the Adafruit store. We cannot guarantee this will work with solar panels purchased elsewhere. This charger is a very unique design, perfect for outdoor projects, or DIY iPod chargers. 
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8