Our Brands

3D /CNC/Mechanical Parts

61 - 75
69 70 71 72 73 74 75 76 77 78 79 80 81 82 83
77 - 91
Newest Items First
15 Per Page
Horizontal Mechanical Limit Switch Breakout Board
US$3.59
This device employs a standard miniature limit switch on a breakout board with a detachable JST connection cable included. Once the 3D printer/CNC frame axis reaches the end of the shaft as the motor slides down, the limit switch pushes up against the casing barrier and stops its motion.
In stock
+ −
Add to wish list
8mm Extruder Gear For 1.75mm Filament
US$3.49
The following is a feeding drive gear for your extruders stepper motor. Place this part on the shaft of your stepper motor and you can then use it as a pulley to feed the hot end with your filament. This gear is able to grip most filaments but is only compatible with 5mm shafts.
In stock
+ −
Add to wish list
5mm Width - U Channel Nylon Slideway Wheel Roller
US$1.99
This product is designed for rollers, wheel mechanism and pulleys. Simply insert this module within the wheel or pulley to allow frictionless movement along with any slider or shaft. Price per unit.
In stock
+ −
Add to wish list
NTC 3950 100K Thermistor with Cable for 3D Printer (Aircraft JST)
US$4.99
A thermistor is a resistor whose value varies with temperature. This type of device is rated at 100K ohm. This particular product is used as replacement 3D printers extruder and heat bed to serve as temperature sensors.
In stock
+ −
Add to wish list
5mm Width - V Shape Stainless Steel Wheel Roller Pulley
US$3.49
This product is designed for rollers, wheel mechanism and pulleys. Simply insert this module within the wheel or pulley to allow frictionless movement along any slider or shaft.  Price per one unit. Recommend to grease the inner bore and rod before using.
In stock
+ −
Add to wish list
Aluminum Heat Block, M6 Thread size for Nozzle & Throat (20 x 16 x 12mm) - PT100 Compatible(Black)
US$2.99
The following is an aluminum heat block, an essential part for any DIY 3D printer projects. In addition, it is PT100 thermistor compatible! Use the M6 hole in the center to place your nozzle and extruder throat.
In stock
+ −
Add to wish list
NTC 3950 100K Thermistor with Cable for 3D Printer (Black)
US$1.99
A thermistor is a resistor whose value varies with temperature. This type of device is rated at 100K ohm. This particular product is used as replacement 3D printers extruder and heat bed to serve as temperature sensors.
In stock
+ −
Add to wish list
Heat Sink for Stepper Motors 40x40x11mm
US$2.49
If you require additional cooling for your steppers motors, this product will do just that. It has a profile of 40x40x11 mm and is made out of out of aluminium. Excellent for CNC and 3D related projects that require passive cooling.
In stock
+ −
Add to wish list
10mm diameter Nylon Braided Cable Sleeve Wire Protection , 1m long
US$1.99

This very handy fabric (often referred to as “loom”) is used for wrapping and protecting wires. Every serious project should consider wire management as a finishing touch.

In stock
+ −
Add to wish list
6mm diameter Nylon Braided Cable Sleeve Wire Protection , 1m long
US$1.99

This very handy fabric (often referred to as “loom”) is used for wrapping and protecting wires. Every serious project should consider wire management as a finishing touch.

In stock
+ −
Add to wish list
M5 Threaded Stainless Steel Bowden Coupler for 1.75mm Filament
US$1.99
This is a connector/adaptor typically found on the extruder section for 3D printers or pneumatic. This product simplifies the task of supplying your nozzle 1.75mm filament.
In stock
+ −
Add to wish list
M6 Threaded Stainless Steel Bowden Coupler for 1.75mm Filament
US$1.99
This is a connector/adaptor typically found on the extruder section for 3D printers or pneumatic. This product simplifies the task of supplying your nozzle 1.75mm filament.
In stock
+ −
Add to wish list
DLP/LCD FEP Film for Photocuring Resin 3D Printers
US$8.49
The FEP film is the double-layered and transparent foil installed in the rack attached to the resin tank of a resin 3D printer. It creates a clean way for the UV light to cure liquid resin during the whole printing process.
In stock
+ −
Add to wish list
3D-N-0.5MK8S MK8 Stainless Steel Nozzle of 0.5mm Diameter for 1.75mm filament for 3D Printers
US$3.99
This is a MK8 compatible stainless steel nozzle. These nozzles ensure high-resolution prints due their very small tip size. The fact that they are made from stainless steel allows you to print abrasive material such as: carbon fiber, glow in the dark, metal filled composites etc
In stock
+ −
Add to wish list
3D-N-0.2MK8S MK8 Stainless Steel Nozzle of 0.2mm Diameter for 1.75mm filament for 3D Printers
US$3.99
This is a MK8 compatible stainless steel nozzle. These nozzles ensure high-resolution prints due their very small tip size. The fact that they are made from stainless steel allows you to print abrasive material such as: carbon fiber, glow in the dark, metal filled composites etc
In stock
+ −
Add to wish list
61 - 75
69 70 71 72 73 74 75 76 77 78 79 80 81 82 83
77 - 91