Pillow Block Flange Bearing - 17mm Bore Diameter
Pillow blocks are used for supports for rods and can be tighten to act as a fastener. Commonly used for robotics and CNC/3D units. The inside of the flange contain ball bearings to help move the rod and prevent any damage. The T8 hex nut on the side will help secure the rod will allowing you to spin the rod in a circular fashion.
Used for perfect alignment while stepping.
|
Part # |
Inner Dia. |
Outer Dia. |
Hole Dia. |
Hole Center Spacing |
Length |
Height |
Material |
|
MP-PBF-8 |
8mm/0.31” |
26mm/1.02” |
5mm/0.20” |
36.5mm/1.45” |
47mm/1.44” |
13mm/0.51” |
Chrome Steel, Zinc Alloy |
|
MP-PBF-10 |
10mm/0.40” |
33mm/1.30” |
7mm/0.28” |
45mm/1.78” |
60mm/2.40” |
15mm/0.60” |
Chrome Steel, Zinc Alloy |
|
MP-PBF-12 |
12mm/0.48” |
90mm/3.54” |
7mm/0.28” |
47mm/1.85” |
62mm/2.44” |
15mm/0.60” |
Chrome Steel, Zinc Alloy |
|
MP-PBF-15 |
15mm/0.59” |
33.83mm/1.33” |
1.94mm/0.07” |
47mm/1.85” |
61mm/2.4” |
11.45mm/0.45” |
Chrome Steel, Zinc Alloy |
|
MP-PBF-17 |
17mm/0.31” |
41.36mm/1.06” |
7mm/0.20” |
55mm/1.45” |
70mm/1.85” |
17mm/0.51” |
Chrome Steel, Zinc Alloy |
WARNING
