0.8KG 1.75mm Red Flexible TPU Filament for 3D Printers
This is a 1.75mm diameter TPU filament with a density of 1.23 g/cm^3. It has a net weight is 800g (around 1100g gross). The material of the filament will melt with nozzle temperatures ranging from 190-210°C. We highly recommend printing with heated bed turned on at 50°C to prevent the print warping and peeling off the bed especially when printing a large model. This filament is sealed in a vacuum sealed plastic bag, meaning that the filament is kept in ideal conditions before being unpacked for usage.
Notes: This TPU is very soft and will require you to lower the printing speed significantly (by half). Turning the part cooling fan on at 70% will deliver better printing results but it is not a necessity. Also, Some modifications to your extruder mechanism may be needed (check on Thingiverse.com for your printer).
Specifications:
Spool Net Weight：0.8kg
Diameter：1.75mm ± 0.05mm
Print Temperature：190 - 220°C
Hot Bed Temperature：0 - 50°C
Print Speed：20-50mm/s
WARNING
