NEMA 17 Compatible Stepper Motor for 3D Printers and CNC XYZ
A NEMA 17 stepper motor is a stepper motor with a 1.7 x 1.7 inch (42.3 x 42.3 mm) faceplate. The NEMA 17 is larger and generally heavier than for example a NEMA 14, but this also means it has more room to put a higher torque. However, its size is not an indication of its power. The motor conveniently connects via a typical 6 pin JST.
Specifications
- Dimensions: 42.3 x 42.3 x 33.7mm / 1.7 x 1.7 x 1.33"
- Stepping Angle: 1.8
- Rated Voltage: 4.83VDC
- Current: 0.84 A/Phase
- Resistance/Impedance Zr: 5.75 ohm/Phase
- Inductance: 9.3 mH/Phase
- Holding Torque: 2.8 kg-cm
- Insulation Class: B
WARNING
