2004 RepRap Graphic LCD Controller for 3D Printing (Marlin Firmware Compatible)
Based on the 2004 LCD, this board is designed to be used with any 3D printer controller board. It offers a resolution of 20x4 characters to be displayed. Using the Marlin firmware, you can select to be used as the 2004 graphic controller that will display text.
It features an rotary encoder to scroll through the select menus and press downwards onto the encoder for selecting options.
Above the encoder is the buzzer for confirmation of menu selection and completion of specified print jobs.
On the bottom is the emergency stop button should you need to stop the print in case the filament is wrong, the file selected is wrong or the risk of the nozzle smashing into the bed. (All these variables depend on the firmware coded into your Printer controller)
You also have the option to adjust the contrast using the potentiometer provided on the back side of the graphic controller. You are provided with a standard SD reader and the classic serial connection EXP1 and EXP2. (The cable and adapter for the Arduino Mega is also provided.)
Specifications:
- Dimensions: 15 x 6.2 x 3 cm (L x W x D)
- Screen Size: 8cm
- Cable Length: 21 x 1.3 cm (L x W)
- Screen Resolution: 2004
- Recommend for MKS BASE and RAMPS V1.4 (Anything that runs Marlin Firmware)
WARNING
