TO-516C 6 x 6 x 22mm Left-Hand Down-Cut Double Flute End Mill

Price:
US$21.61
TO-516C
In stock
+
Add to wish list

6 x 6 x 22mm Left-Hand Down-Cut Double Flute End Mill

This left-hand down-cut end mill has a shank diameter of 6mm, a cutting diameter of 6mm and a cutting depth of 22mm.

The “down-cut” spiral bit flutes are designed to cut from the top surface down, leaving a smooth edge at the surface. It pushes down on the material being cut, and helps hold the material in place on the table surface. Some operators like this bit as it packs the sawdust in the groove being cut, this helps hold parts in position and helps maintain vacuum when that type of hold down system is used. Disadvantages are the packed sawdust is not removed by the dust collector and must be scraped or brushed off manually. Also this bit is not appropriate for thermoplastics as the "packing" of the dust re-welds the parts together. When making "through cuts" the down cutting force can splinter the bottom face of veneered or other susceptible materials

Specifications:

  • Package: 1 end mill
  • Type: Left-hand down-cut double flute
  • Bit Diameter: 6mm
  • Shank Dia.: 6mm
  • Cutting Depth: 22mm
  • Overall Length: 50mm
  • Material: Ultra micro grain tungsten carbide
  • Best for Cutting: Corian, plastic, linoleum, wood, plywood, MDF
  • Tolerance: ±0.02mm
Notice for California Residents: Warning symbolWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov