This breadboard arduino compatible kit contains all the components and instructions to assemble a fully functioning Arduino Uno on a breadboard.
This is an excellent kit for those who want to undesrstand how an Arduino works by making one from scratch.
All the required parts are in this kit, including an ATmega328 preloaded with an Arduino bootloader. The breadboard layout sheet allows you to make component placement easy. A well illustrated color instruction booklet is also included.
NOTE: This kit does not include any USB circuitry, thus to program it you will either require a spare Arduino USB (duemilanove or uno) board, or an FTDI USB-Serial programming cable (DEV-09718).
Kit Contents:
| ITEM | ABRA PART# | DESCRIPTION | QTY |
| Assembly Guide | ARD-101-ASY | Assembly Guide | 1 |
| Battery Clip | 29-130 | 9 Volt Battery Clip | 1 |
| Breadboard | ABRA-6 | Breadboard 400 Tie-Points | 1 |
| Layout Sheet | ARD-101-LOS | Breadboard Layout Sheet | 1 |
| Crystal | CY16.000 | Crystal 16.000 MHZ | 1 |
| Jumper Wires | JW-12 | 12 Piece Jumper Wire Set | 1 |
| LED Green | LED-5G | Green LED 5mm | 1 |
| LED Red | LED-5R | Red LED 5mm | 1 |
| Microcrontroller | A000048 | ATMEGA328 w/Bootloader | 1 |
| Switch | PBS-175 | Push Button Momentary | 1 |
| Regulator | 7805T | 5 Volt Voltage Regulator | 1 |
| 2 Pin Header | SH2-2 | Layout Sheet 2 pin Header | 4 |
| 6 Pin Header | SHA-6 | FTDI Cable Connector 6 Pin | 1 |
| 0 ohm Resistor | R1/4-0 | Resistor 0 Ohm Jumper | 12 |
| 560 ohm Resistor | R1/4-560 | Resistor 1/4w 560 ohm | 2 |
| 10K ohm Resistor | R1/4-10K | Resistor 1/4w 10K ohm | 2 |
| 22pf Capacitor | CD220 | Capacitor Ceramic 22pf | 2 |
| 100nf Capacitor | CD104 | Capacitor Ceramic 100nf | 2 |
| 100uf Capacitor | 100R16 | Capacitor Electrolytic 100uf | 2 |
WARNING
