Our Brands

ABRA

1 2 3 4 5 6 7 8 9 10 11 12
6 - 13
Newest Items First
15 Per Page
AK-105 D.I.Y Multifunction LCR & ESR Tester Kit
US$27.93
Build your own pocket size Inductance, Capacitance and Resistance meter as well as an equivalent series resistance meter jam packed into a single tiny unit. The instruction manual gives a basic outlook of how to toggle into each mode and select the function you desire. This device also offers the option to have a function generator that can go from mHz upto Khz to a max of 2000KHz!
In stock
+ −
Add to wish list
AK-110 Audio Visualizer LED Ripple D.I.Y. Kit
US$6.99

This fun Audio Visualizer utilizes a CD4017 logic IC to produce audio visualization based on the input through the microphone. It comes with a seven page colored manual illustrating step by step instructions. Teachers love this kit. Students will enhance their soldering skills on a high quality PCB, and end up with something fun.

In stock
+ −
Add to wish list
AK-115 D.I.Y Digital Ammeter
US$13.93
Build your own digital ammeter and improve your skills in soldering with this D.I.Y kit. This device acts as a current measurement display unit that can measure up to 2 amps. Following our basic and straight forward guide you just have to solder the components into place to get your own ammeter up and running. We also provided a basic black housing for you to put your ammeter into.
In stock
+ −
Add to wish list
AK-90 D.I.Y Mini Function Generator 200Hz to 2kHz Kit
US$12.53
Using the ICL8038 IC, this kit allows you to create a function generator that can create sine waves, square waves and triangle waves. You can adjust the potentiometer for vary the frequency from 200Hz to 2kHz. Play with the other two potentiometers to adjust the duty cycle and adjusting the offset of your signal. This kit is aimed for helping students or beginners in electronics solder their second through-hole board.
In stock
+ −
Add to wish list
AK-95 D.I.Y 4 Bit Digital Clock Kit
US$11.13
This kit is a simple soldering practice board, the goal is to build a digital clock! Using the Abra Kits guideline we have streamlined the manual to offer at most a schematic diagram, a parts list and basic soldering guide. This makes our manual ideal for classrooms who want no non-sense straight forward guide. This clock has two alarms and on digital clock, when powered off the settings will be reset.
In stock
+ −
Add to wish list
AK-120 D.I.Y LED CUBE with Touch Control
US$21.70
Challenge yourself to create one of the most difficult things to make an LED Cube. The hardest part of this design is the backside which compose Surface mount components that need to be soldered into place! After mounting the components using either a soldering iron or Hot-air Rework Station, you have to flip the board and attempt to solder an array of 3x3x4 LEDs. Following our guide offers a good practice and verifications of your skill!
In stock
+ −
Add to wish list
AK-85 D.I.Y 30 Watt TDA2030A Stereo Amplifier Kit (15W +15W)
US$20.93
Build your own amplifier board that can control the bass, treble and volume! Works great with 4 to 8 ohm impedance speakers. Tested with our 5 watt speaker. All you need is a transformer, some 3.55mm audio source input and your speakers for the output. A rough estimate of 30 minutes soldering work is required to construct this kit. The two channels can deliver a max of 15 Watts thanks to the beefy heatsink. If you are looking for a preassembled and straight out the box functionality please look for “MOD-AMP”.
In stock
+ −
Add to wish list
LCD-MOD-13 16x2 LCD Display with I2C backpack - White on Blue
US$12.53
Typically this unit has 16 pinouts that requires a breadboard to interface with any microcontroller and a 10k potentiometer to adjust the contrast value to reduce the backlight and view the text. However with the addition of the I2C Backpack pre-soldered you only need to connect four pins to your microcontroller. You do not need to worry about the 16 pin cables that need to be connected and the unit comes with a potentiometer to adjust the Contrast. You also have a jumper for two pins to enable or disable brightness.
In stock
+ −
Add to wish list
AK-60 D.I.Y Digital Temperature Controller Thermostat kit (AT89C2051-24PU)
US$13.42
A small circuit that requires some soldering work to be done, will give you a simple tiny pre-programmed thermostat that acts like a relay. Simply configure the temperature you want the relay to create a close circuit and watch the system do its’ magic.
In stock
+ −
Add to wish list
AK-75 LED Ripple Flash Kit D.I.Y
US$5.59
Simply follow the basic manual or skip to the schematic diagram and assemble this led Ripple/Flash board based on the 555 timer and CD4017BE IC. Reuse the ICs for creating other circuits such as a follower using a LED Vu Meter on breadboard. Hack the board to create a Night Rider Circuit or anything else you might want to use for the future, the system should be fairly easy to assembly and offers a functional circuit which will also demonstrate if your soldering skills have improved.
In stock
+ −
Add to wish list
SENS-BR-KIT Rangefinder HC-SR04 and SG92R Motor mount kit
US$18.15
This kit comes preloaded with a HC-SR04 ultrasonic rangefinder, a tower pro SG92R servo and four wire DuPont female to female cable for connecting straight to your microcontroller of choice. This entire unit is held together by a beautiful and transparent acrylic frame, it has three holes to be mounted onto any surface you choose for your robotic application needs.
In stock
+ −
Add to wish list
Electronic Circuits for the Evil Genius 2/E Book and Kit Combo
US$118.25

This Combo includes the book Electronics Circuits for the Evil Genius 2/E and the Electronics Kit needed to complete the projects in the book. This comprehensive combo provides both theory (book) and practice (kit) and is an excellent teaching tool for students, hobbyists and teachers.

In stock
+ −
Add to wish list
SMD-COMP-KIT Learn How to Solder SMD Components
US$13.99
This surface mount soldering kit allows you to practice soldering smd components such as resistors, capacitors, diodes, transistors and integrated circuits onto a printed circuit board.
In stock
+ −
Add to wish list
PI-ARD-SENSORS GETTING STARTED WITH SENSORS KIT
US$109.13

This kit teaches you how to connect and read sensors through a series of short projects using the popular Arduino or Raspberry Pi microcontrollers. In the included fully-illustrated book you will gain hands-on experience with some of the most useful and instructive sensors available. Note that Arduino and Raspberry Pi are not included in this kit.

In stock
+ −
Add to wish list
RES-KIT-1/2 Watt Resistor Kit, 365 pieces
US$21.84
ABRA's 1/2W Carbon Film Resistor Kit Kit contains five each of seventy three of the most popular 1/2W resistors, all labelled and packaged in a cardboard...
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8 9 10 11 12
6 - 13