Our Brands

Adafruit

20 - 34
28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
36 - 47
Newest Items First
15 Per Page
1134 Breadboard-friendly MIDI Jack (5-pin DIN)
1134 Breadboard-friendly MIDI Jack (5-pin DIN)
CA$3.37
They're what you see on the back of nearly every synthesizer and drum machine. These are nice sturdy jacks, and breadboard-friendly, with all the pins on 0.1" spacing for easy wiring.
In stock
+ −
Add to wish list
366 2mm 10 pin socket header (for XBee)
366 2mm 10 pin socket header (for XBee), pack of 2
CA$1.92
XBees are so cute and tiny but if you're using them in a circuit you'll be annoyed to find that your classic 0.1" headers don't fit them! That's because they use 2mm spacing instead of 2.54mm spacing. That's why you need a special socket like this one.
In stock
+ −
Add to wish list
888 Aluminum iPhone 4S 0.8mm 5-Point Star/Pentalobe Screwdriver
888 Aluminum iPhone 4S 0.8mm 5-Point Star/Pentalobe Screwdriver
CA$19.14
The body is made from a single piece of aluminum and has nice knurled grips. The end-cap rotates so you can keep the body steady while rotating. The tip is nicely machined and is magnetic so it holds the miniscule screws in place while inserting/removing them.
In stock
+ −
Add to wish list
711 DC Toy / Hobby Motor - 130 Size
711 DC Toy / Hobby Motor - 130 Size
CA$3.76
These are standard '130 size' DC hobby motors. They come with a wider operating range than most toy motors: from 4.5 to 9VDC instead of 1.5-4.5V. This range makes them perfect for controlling with an Adafruit Motor Shield, or with an Arduino where you are more likely to have 5 or 9V available than a high current 3V setting.
In stock
+ −
Add to wish list
918 Small Reduction Stepper Motor - 12VDC 48-Step 1/16 Gearing
918 Small Reduction Stepper Motor - 12VDC 48-Step 1/16 Gearing
CA$9.53
This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes. 
In stock
+ −
Add to wish list
1201 Vibrating Mini Motor Disc
1201 Vibrating Mini Motor Disc
CA$3.76
Two wires are used to control/power the vibe. Simply provide power from a battery or microcontroller pin (red is positive, blue is negative) and it will buzz away. Works from 2V up to 5V, higher voltages result in more current draw but also a stronger vibration.
In stock
+ −
Add to wish list
368 Female DC Power adapter - 2.1mm jack to screw terminal block
368 Female DC Power adapter - 2.1mm jack to screw terminal block
CA$2.74
If you need to connect a DC power wall wart to a board that doesn't have a DC jack - this adapter will come in very handy! There is a 2.1mm DC jack on one end, and a screw terminal block on the other.
In stock
+ −
Add to wish list
875 8 x AA battery holder with 5.5mm/2.1mm Plug and On/Off Switch
875-ADA 8 x AA battery holder with 5.5mm/2.1mm Plug and On/Off Switch
CA$8.77

Perfect for portable Arduinos, motors, solenoids, 12V LED strips, etc. An On/Off switch lets you control the power right at the source without unplugging. Batteries not included. Dimensions: 1127mm x 71mm x 19mm (5in x 2.8in x 0.76in). Attached lead + plug is 14cm/6in long. Weight (without batteries): 75g.

In stock
+ −
Add to wish list
369 Male DC Power adapter - 2.1mm plug to screw terminal block
369 Male DC Power adapter - 2.1mm plug to screw terminal block
CA$2.74
If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! There is a 2.1mm DC plug on one end, and a screw terminal block on the other.
In stock
+ −
Add to wish list
830 4 x AA Battery Holder with On/Off Switch
830 4 x AA Battery Holder with On/Off Switch
CA$5.68
Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off switch which can be handy when wiring to something without a switch.
In stock
+ −
Add to wish list
770 Waterproof 2xAA Battery Holder with On/Off Switch
770 Waterproof 2xAA Battery Holder with On/Off Switch
CA$7.60
Keep your power source safe and toasty in these waterproof 2xAA battery holders. They're just like classic switched battery holders, but designed for survival! The case has a rubber gasket around the edge of the case (its black and hard to see in the photos but it is there) and attaches together with 4 machine screws.
Delivery within 2-3 weeks
+ −
Add to wish list
188 Graphic KS0108 LCD 128x64 + extras - white on blue
188 Graphic KS0108 LCD 128x64 + extras - white on blue
CA$46.15
A big, bold, beautiful blue LCD with white back-lit pixels. This LCD is the graphical upgrade to those popular 16x2 LCDs, but allows full graphical control.
In stock
+ −
Add to wish list
338 Nokia 5110/3310 monochrome LCD + extras
338 Nokia 5110/3310 monochrome LCD + extras
CA$19.23
These displays were used in old Nokia 5110/3310 cell phones (before the smart-phone fad turned every cell phone into a TV). It's a 84x48 pixel monochrome LCD display.
In stock
+ −
Add to wish list
353 Lithium Ion Battery Pack - 3.7V 6600mAh
353-ADA Lithium Ion Battery Pack - 3.7V 6600mAh
CA$75.97
Need a massive battery for your project? This lithium ion pack is made of 3 balanced 2200mAh cells for a total of 6600mA capacity! The cells are connected in parallel and spot-welded to a protection circuit that provides over-voltage, under-voltage and over-current protection.
In stock
+ −
Add to wish list
153 Breadboarding wire bundle
153 Breadboarding wire bundle
CA$11.54
65 flexible stranded core wires with stiff ends molded on in red, orange, yellow, green, blue, brown, black and white. These are a major improvement over the "box of bent wires" that are sometimes sold with breadboards, and faster than stripping your own solid core wires. Makes breadboarding super fast.
In stock
+ −
Add to wish list
20 - 34
28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
36 - 47