MG Chemicals

1 2 3 4 5 6 7 8 9 10
4 - 18
US$11.95
The 826 Static Off™ Antistatic Foaming Spray has non-drip formulation that effectively polishes and eliminates static charges with a single application. The spray is safe on all surfaces and gives a streak-free finish for improved optical clarity and distortion-free reading. The 826 is ideal for use on glass, plexiglass, plastics, and surfaces of production equipment, medical equipment, control panels, computer housing, oscilloscopes and more. It removes dirt, dust, light oils, and fingerprints.
In stock
+
Add to wish list

Contact us for a price
The 838AR Total Ground Carbon Conductive Coating is a one-part durable acrylic lacquer pigmented with a highly conductive carbon powder. It utilizes a solvent based system with no heat cure necessary. The cured coating is smooth, hard, and abrasion resistant. It provides strong adhesion to plastics, good conductivity, excellent low frequency shielding, and strong corrosion resistance, even in marine environments.
Delivery within 1-2 weeks

US$183.85
The 838AR Total Ground Carbon Conductive Coating is a one-part durable acrylic lacquer pigmented with a highly conductive carbon powder. It utilizes a solvent based system with no heat cure necessary. The cured coating is smooth, hard, and abrasion resistant. It provides strong adhesion to plastics, good conductivity, excellent low frequency shielding, and strong corrosion resistance, even in marine environments.
Delivery within 1-2 weeks
+
Add to wish list

US$11.85
A 8342 RA Rosin Flux Paste superior electronic grade flux paste system that makes SMD electrical and electronics soldering faster and easier. It is designed for lead-free alloys, but it works well with conventional leaded solder. It is easy to apply and stays on the area where it is applied, and a little bit goes a long way. It does not contain any Zinc Chloride or Ammonium Chloride. Post soldering residues removal is much easier due to the organic acid base of the flux.
In stock
+
Add to wish list

US$19.75

The 841AR-P Nickel Conductive Pen is a highly conductive, fast drying paint in a convenient pen format. It quickly and easily creates durable, reliable, corrosion resistant, and highly conductive traces. It adheres to a wide variety of substrates. This product works best on smooth, flat, and hard surfaces. It has a valve tip that opens when the pen is pressed against the surface to be drawn on and it has a soft tube, so the flow may be controlled by squeezing the center of the pen.

In stock
+
Add to wish list

US$19.95
The 838AR-P Carbon Conductive Pen is a conductive, fast drying paint in a convenient pen format. It quickly and easily creates conductive traces that are durable, reliable, and corrosion resistant. It adheres to a wide variety of substrates. The paint is a tough acrylic polymer pigmented with high purity carbon black. The carbon black imparts superior corrosion resistance as well as high conductivity.
In stock
+
Add to wish list

US$13.95

The 8361-P Pen effectively removes adhesives and sticker residues. Newly formulated for improved performance on ink removal. Easy to use on most surfaces to remove gummy residues from unwanted labels. Allow solvent to penetrate then wipe clean. Pleasant odor makes product easy to work with.

In stock
+
Add to wish list

US$10.75
The 837-P Water Soluble Flux Pen is a neutral, water-removable soldering flux. The organic activating system in 837-P has a neutral ρH at room temperature and becomes activated at soldering temperature. The 837-P flux is formulated to be effective over a broad preheat range and may be used for both leaded and lead-free applications. It cleans easily with hot or cold water. A chiseled tip provides exact delivery of the flux to the surface.
In stock
+
Add to wish list

US$11.85
The 836-P No Clean Flux Pen contains a homogenous mixture of halogen-free, low-solids organic flux. It exhibits excellent wetting and fluxing activities, and it leaves essentially no residue on the assembly after soldering. The 836-P No Clean Flux Pen may be used for both leaded and lead-free applications. A chiseled tip provides exact delivery of the flux to the surface.
In stock
+
Add to wish list

US$22.95
The 434 Acetone is a super-fast drying, VOC-exempt, and zero residue solvent. It is very useful for 3D printing because it can be used to improve adherence of the ABS plastic to the printing bed. The acetone vapors can also be used to smooth the surface of finished 3D printed pieces.
In stock
+
Add to wish list

US$135.75
Used for dissolving HIPS (High Impact Polystyrene) when used as support material for 3D printing. Also an excellent cleaner degreaser and can be reduced with water.
Delivery within 1-2 weeks
+
Add to wish list

US$5.45
Any place you can put solder in, you can take it out with our lead free super wick. Specifically designed for high temperature, lead free solders. Also works great with conventional tin/lead solders. More strands of copper (more surface area) per square inch.
In stock
+
Add to wish list

US$110.95
MG Chemicals has developed a unique flux system designed specifically for high temperature lead free alloys. It provides the fluxing activity levels that promote thermal stability and prevents thermal degradation when reflowing under air atmosphere (normal).
Delivery within 1-2 weeks
+
Add to wish list

US$23.95
This is low thermal resistance grease with a synthetic oil base that is electrically insulating and non-corrosive.
In stock
+
Add to wish list

US$136.55
This is low thermal resistance grease with a synthetic oil base that is electrically insulating and non-corrosive. It is used to improve the thermal interface contact conductivity between heat sinks, LEDs, motors, and heat-generating electronic components such as CPUs, GPU chipsets, power components, and so on.
Delivery within 1-2 weeks
+
Add to wish list
1 2 3 4 5 6 7 8 9 10
4 - 18