Our Brands

DFRobot

2 - 16
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
18 - 32
Sort by Price: High to Low
15 Per Page
DFR0515 FireBeetle OSD Character Overlay Module
US$17.50
OSD is the abbreviation of On-screen Display, this is a screen menu adjustment display technology to add different menu-style characters on the screen display. FireBeetle OSD Character Overlay Module is a new product presented by DFRobot. It adopts AT7456E OSD chip. This is a single-channel OSD module, equipped with functions like video drive, sync separator, video separate switch, etc. It comes with 512 bytes EEPROM user-defined storage space. After connected to video sources (AV Signals), the display covers 540x192 pixels which can show 16x30 characters on the screen. Users can also call font library to show characters and images. This FireBeetle OSD Character Overlay Module is compatible with FireBeetle series interfaces and can be directly plugged into FireBeetle mainboards.  This module can be widely applied to device character display and time display of monitor device such as road cameras, home automation.
In stock
+ −
Add to wish list
IIC 16x2 RGB LCD KeyPad HAT V1.0
US$17.50
This is a 2*16 character RGB LCD+Keypad plate for Raspberry Pi. We made improvements in the wiring connection based on the previous LCD display as well as left out the contrast adjustment function, so the product can be pretty easy to use, and users can spend time focusing on the most important projects.
In stock
+ −
Add to wish list
SEN0485, Gravity: 5V Non-contact Liquid Level Sensor
US$17.50
The SEN0485 is a small sensor able to detect 0-100°C conductive liquid levels in non-metallic containers. It is flexible, durable waterproof and oilproof.
In stock
+ −
Add to wish list
FIT0850, NPN to PNP Signal Converter / Adapter Module
US$17.50
The FIT0850 is a signal converter designed to take NPN signals to PNP. It's equipped with surge absorption and over-current protection to further protect your device.
Delivery within 2-3 weeks
+ −
Add to wish list
SEN0509, Capacitive Pipeline Liquid Level Sensor
US$17.50
The SEN0509 is a capacitive pipeline liquid level sensor of high sensitivity. It's suitable for non-metallic pipes with a diameter of 6mm. The sensor outputs digital high/low level(low when liquid detected) and adopts a 3-pin DuPont connector.
In stock
+ −
Add to wish list
DFR0392 DFRduino M0 Mainboard (Arduino Compatible)
US$17.25
DFRduino M0 is the first 32-bit Arduino microcontroller based on ARM Cortex-M0 core that supports 5V logic. If you use a standard UNO-compatible microcontroller in a project, do you ever find that GPIO and processing performance is underwhelming? Upgrading to a Mega style microcontroller is too expensive, and Arduino ZERO/M0 doesn’t support 5V logic. These problems are solved with the DFRduino M0. The DFRduino M0 uses a Nuvoton high-performance 32-bit microcontroller as the processing core with integrated ARM Cortex M0 architecture, supports 5V logic, includes a USB port and two hardware serial ports with 31 digital pins (partial multiplexing) and 6 analog pins. It is compatible with Arduino Leonardo pin mappings and has more I/O resources and more powerful processing capacity.
In stock
+ −
Add to wish list
DFR0553 Gravity: I2C ADS1115 16-Bit ADC Module (Arduino & Raspberry Pi Compatible)
US$17.25
DFRobot I2C ADS1115 16-bit ADC module can accurately collect and convert analog signals. Through this ADC module, Raspberry Pi can easily use a wide range of Gravity series analog sensors to measure various signals, and perceive this world. Raspberry Pi is a common master control board which is powerful in its functions, but the I/O pins of Raspberry Pi can read digital signals only, what's more, only through an external analog-to-digital conversion (ADC) module can it read signals of analog sensor or device, it is not convenient to use. DFRobot I2C ADS1115 16-bit ADC module is specially designed for Raspberry Pi and Gravity series analog sensors, which greatly reduces the difficulty of using the Gravity series analog sensors, plug and play, no welding, very convenient. The number of Gravity series sensors is large and its wide variety can meet the needs of various sensors of the Raspberry Pi.
In stock
+ −
Add to wish list
SEN0250 Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
US$17.25
The BMI160 6-axis inertial motion sensor is a new product from DFRobot. It is based on Bosch BMI160 6-axis MEMS sensor which integrates 16-bit 3-axis accelerometer with ultra-low-power 3-axis gyroscope. Bosch BMI160 is designed for smartphones, tablets, wearable devices. It has built-in intelligent step-counting algorithms that can be read directly through registers. Built-in 3-axis acceleration and 3-axis gyroscope can detect running, fitness and other motion. Built-in LDO power management chip, supports 3.2~6V wide voltage power supply, and also has I2C level conversion circuit, compatible with Arduino 3.3V and 5V micro controller.
In stock
+ −
Add to wish list
DFR0548 Micro:bit Motor Driver Expansion Board
US$17.25
Since the advent of micro:bit, its simple and practical way of programming is widely loved by makers, students and teachers. Its sample design, coupled with a wealth of pin resources, give it infinite possibilities. This expansion board not only leads to 9 micro:bit onboard GPIO interfaces, but also comes with 4-way motor drives and 8 servo interfaces, of which 4-way motor drives can be reused as 2-way stepper motor drives.
In stock
+ −
Add to wish list
SEN0189 Gravity: Analog Turbidity Sensor For Arduino
US$17.25
This sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases.
In stock
+ −
Add to wish list
Monochrome 0.91”128x32 I2C OLED Display with Chip Pad
US$17.25
This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length is 41mm and the width is only 12mm. With its small size, simple wiring, and low power consumption, it can be applied to many display applications, such as wearable display devices, Mini small game consoles, desktop widgets, etc.
Delivery within 2-3 weeks
+ −
Add to wish list
Monochrome 0.91”128x32 I2C OLED Display
US$17.25
This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length is 33mm and the width is 20mm. With its small size, simple wiring and low power consumption, it can be applied to many display applications, such as wearable display devices, Mini small game consoles, desktop widgets, etc.
In stock
+ −
Add to wish list
Gravity: SHT31-F Digital Temperature and Humidity Sensor
US$17.25
The sensor supports I2C communication, and is compatible with 3.3V/5V controllers like Arduino, micro:bit, ESP32. It is easy to achieve precise and high-reliability temperature and humidity sensing for urban environment monitoring, intelligent buildings, industrial automation, smart home and other Internet of Things applications. SHT31-F is the standard version of the SHT3x series. It provides humidity accuracy ±2% RH @ 0%RH~100%RH (at 25°C), and temperature accuracy±0.2°C @ 0℃-90℃ (typical).
In stock
+ −
Add to wish list
SEN0411, Gravity: I2C LIS331HH Triple Axis Accelerometer Sensor (±6g/±12g/±24g)
US$17.25
The SEN0411(LIS331HH) is 3-axis linear accelerometer with an ultra-low power consumption, this sensor is applicable to fields such as: navigation, smart agriculture, robotics, VR/AR, etc.
In stock
+ −
Add to wish list
SEN0441 Fermion: MEMS Gas Sensor - MiCS-2714 (Breakout)
US$17.25
This is a hydrogen and nitrogen oxide gas concentration sensor launched by DFRobot. The sensor uses MEMS technology to support gas concentration detection of NO, NO2 and H2. The matching sample code integrates the concentration conversion formula of various gas to facilitate the testing and use of sensors. The product supports 5V power supply, analog voltage output, and has power supply enable/disable pins for low power consumption.
In stock
+ −
Add to wish list
2 - 16
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
18 - 32