Our Brands

Adafruit

12 - 26
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
28 - 42
Sort by Popularity
15 Per Page
1911-ADA Quad Alphanumeric Display - Red 0.54" Digits w/ I2C Backpack
1911-ADA Quad Alphanumeric Display - Red 0.54" Digits w/ I2C Backpack
CA$19.14

This product comes with: 2 x Ultra-Bright Red Alphanumeric Display - 0.54" Digit Height for 4 digits total. 1 x Adafruit 14-segment LED Alphanumeric Backpack. 1 x 5-pin header.

Delivery within 2-3 weeks
+ −
Add to wish list
820-ADA Micro Switch w/Wire - Three Terminals
820-ADA Micro Switch w/Wire - Three Terminals
CA$5.68
This microswitch has a 3" long wire lever actuator and three terminals. Sometimes called 'coin switches' - they're used in coin detectors. The terminals are along the bottom (the other microswitches have them on the sides).
In stock
+ −
Add to wish list
455 Small 1.2" 8x8 Ultra Bright Red LED Matrix - BL-M12A881UR-11
455 Small 1.2" 8x8 Ultra Bright Red LED Matrix - BL-M12A881UR-11
CA$8.66
There are 16 pins on the side, 8 on each, with 0.1" spacing so you can easily plug it into a breadboard with one row on each side for wiring it up.
In stock
+ −
Add to wish list
1801-ADA 3.5mm (1/8") Stereo DIY "Free-Hanging" In-Line Jack
1801-ADA 3.5mm (1/8") Stereo DIY "Free-Hanging" In-Line Jack
CA$3.76
Repair or design your very own audio cables with these nice and durable phono-jack connectors. This is a great jack to make your own cable with. it's made out of durable metal with a flexible, sturdy spring for strain-relief.
In stock
+ −
Add to wish list
2880-ADA 2-pin JST SM Plug + Receptacle Cable Set
CA$1.45
These 2-wire cables are 16cm long and come as a set.  One side has a 2-pin JST SM type connector plug on the end.  The other side has a matching 2-pin JST SM type receptacle connector.  They are good for whenever you have 2 wires you want to be able to plug and unplug.
In stock
+ −
Add to wish list
2029-ADA Assembled Pi Cobbler Plus - Breakout Cable - for Pi B+/A+/Pi 2/Pi 3
CA$13.37
It's an add on prototyping Pi Cobbler from Adafruit specifically designed for the B+ and Pi 2 that you can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This will make "cobbling together" prototypes with the Pi super easy.
In stock
+ −
Add to wish list
1352-ADA 4-Way 2.1mm DC Barrel Jack Splitter
1352-ADA 4-Way 2.1mm DC Barrel Jack Splitter
CA$9.53
Quadruple your power adapters with this wonderfully simple 4-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end, and behold, four identical plugs to use!
In stock
+ −
Add to wish list
2222-ADA GPIO Header for Raspberry Pi B+ - 2x20 Female Header
CA$2.89
Connect your own PCB to a Raspberry Pi B+ with this normal-height female header.
In stock
+ −
Add to wish list
261 JST 2-pin cable
261 JST 2-pin cable
CA$1.84
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly charger!
In stock
+ −
Add to wish list
895 Wire Light LED Strand - 12 Blue LEDs + Coin Cell Holder
895 Wire Light LED Strand - 12 Blue LEDs + Coin Cell Holder
CA$9.53
Each strand comes with 12 LEDs, approximately 5cm/2 inches apart for a 2 foot long strand of wire. At one end of the magnet wire, a double stranded-core wire is soldered on and heat-shrinked to protect it.
In stock
+ −
Add to wish list
978 Panel mount HDMI Cable - 40 cm
978 Panel mount HDMI Cable - 40 cm
CA$11.45
This panel mount extension cable will allow you to extend an HDMI connection and secure it to an enclosure. Perfect for placing your Raspberry Pi in a secure box. Two M3 screws are used to attach the female socket end, 1"/25.4mm apart. Two hex-screws are included and the hex nuts are embedded inside the molded end. 
In stock
+ −
Add to wish list
575 Panel Volt Meter - 4.5V to 30VDC
575 Panel Volt Meter - 4.5V to 30VDC
CA$15.30
Dimensions: 48x29x21mm. Panel cutout: 45.5mm x 26.5mm. Digit size: 14mm/0.56" high, green LEDs. Refresh rate: about 2 Hz. Power specifications: 4.5V to 30V DC measurements. 0.1V precision. 3-4mA draw. Green LED display. Reverse polarity protected.
In stock
+ −
Add to wish list
149-ADA Solder wick - 3S 5ft.
149-ADA Solder wick - 3S 5ft.
CA$5.77
5ft spool - Used along with the solder sucker to clean up soldering messes. Wick really comes in handy when soldering or desoldering surface-mount parts. Even if you don't have the best iron for SMT work, a bit of wick will fix it up.
In stock
+ −
Add to wish list
2488-ADA Adafruit METRO 328 with Headers - ATmega328
CA$29.62
This is the Adafruit METRO with headers.  It comes with headers soldered on.  It's a fully assembled and tested board with through-hole headers attached.  METRO is the culmination of years of playing with AVRs: we wanted to make a development board that is easy to use and is hacker friendly. At the heart is an ATmega328P, with 32KB of flash and 2KB of RAM, running at 16 MHz.
In stock
+ −
Add to wish list
159 Diffused RGB (tri-color) LED - Common Anode
159 Diffused RGB (tri-color) LED - Common Anode
CA$3.60
Diffused 5mm tri-color LED with separate red, green and blue LED chips inside! Nice indicator, and fun to color-swirl. 60 degree viewing angle.
In stock
+ −
Add to wish list
12 - 26
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
28 - 42