Our Brands

Sparkfun

1 2 3 4 5 6 7 8
2 - 16
Newest Items First
32 Per Page
SparkFun High Precision Temperature Sensor - TMP117 (Qwiic)
US$19.95
The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of ±0.1°C across the temperature range of -20°C to +50°Cs with no calibration and a maximum range from -55°C to 150°C.
Delivery within 1-2 weeks
+ −
Add to wish list
Qwiic Cable - Breadboard Jumper (4-pin)
US$2.29
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a Qwiic connector to a breadboard or an Arduino-based device’s pins.
In stock
+ −
Add to wish list
SparkFun Qwiic Cable Kit
US$11.95
The SparkFun Qwiic Cable Kit includes 10 cables of various lengths and styles that will get your Qwiic boards connected together, to a development platform, or to a breadboard. Each Qwiic Cable's wires have been color coded to red, black, blue and yellow with 1mm JST termination.
In stock
+ −
Add to wish list
SparkFun Cryptographic Co-Processor Breakout - ATECC608A (Qwiic)
US$6.99
The SparkX ATECC608A Cryptographic Co-processor Breakout allows you to add strong security to your IoT node, edge device, or embedded system. This includes asymmetric authentication, symmetric AES-128 encryption/decryption, and much more. Note, the ATECC608A has limited Arduino support and the complete datasheet is under NDA with Microchip.
In stock
+ −
Add to wish list
SparkFun RedBoard Turbo - SAMD21 Development Board
US$34.95
If you’re ready to step up your Arduino game from older 8-bit/16MHz microcontrollers, the SparkFun RedBoard Turbo is a formidable alternative. At its heart, the RedBoard Turbo uses the ATSAMD21G18, which is an ARM Cortex M0+, 32-bit microcontroller that can run at up to 48MHz. With an impressive 4MB of external flash memory and a UF2 (USB Flashing Format) bootloader, the RedBoard Turbo provides you with an economical and easy to use development platform if you're needing more power than the classic RedBoard.
In stock
+ −
Add to wish list
SparkFun Qwiic Pro Kit
US$84.95
The Qwiic Pro kit provides you with a RedBoard Turbo, two sensors, two accessory boards, and all the cables you need to start utilizing Qwiic and I2C easily. This kit was designed to allow users to get started with Arduino without the need for soldering or breadboarding. Hooking up a handful of inputs and outputs to a RedBoard has never been so easy. Use the joystick, accelerometer, or proximity sensor, and one small display for outputting text, graphics, or even a microPong game!
In stock
+ −
Add to wish list
SparkFun Fuse Breakout Kit
US$6.99
The SparkFun Fuse Breakout Kit comes with everything you need to assembly & use a glass capsule, inline fuse (ferrule type) for your project. The simple breakout design allows for a barrel jack and the option for a screw terminal to be used for (VIN) power input and a second screw terminal used for VOUT. Any 5mm x 20mm glass capsule fuse can be used with this kit depending on your project needs but we have been sure to include a 250VAC, 500mA one to get you started.
In stock
+ −
Add to wish list
SparkFun ATX Power Connector Breakout Board
US$2.79
The ATX power connector breakout board breaks out the standard 4-pin computer peripheral port when mated with an ATX connector for your 12V and 5V devices! Once you have chosen a power supply (whether it be an ATX power supply or the 12V/5V wall adapter), you're ready to give your project some life! This board will need additional parts including a 12V/5V power supply, an ATX breakout, and screw terminals to power your project directly or pump power into a breadboard using standard headers.
In stock
+ −
Add to wish list
SparkFun ATX Power Connector Breakout Kit - 12V/5V (4-pin)
US$24.95
The ATX power connector breaks out the standard 4-pin computer peripheral port for your 12V and 5V devices! Once you have chosen a power supply (whether it be an ATX power supply or the included 12V/5V wall adapter), you're ready to give your project some life! This kit has everything you need to solder together an ATX breakout and screw terminals for powering your project directly or pumping power into a breadboard.
In stock
+ −
Add to wish list
SparkFun gator:RTC - micro:bit Accessory Board
US$20.93
The gator:RTC is a supplemental data logging tool to be used in conjunction with the gator:log, part of SparkFun's gator:bit series of gator-clippable accessories designed for easy interface with the micro:bit or other microcontrollers. This tool allows a student to focus more on the experiment than watching a thermometer or stopwatch.
In stock
+ −
Add to wish list
SparkFun gator:log - micro:bit Accessory Board
US$19.53
The gator:log is the perfect data logging tool for your next experiment. With the automation of the data collection process, gone are the days of rushing around with a pen and composition notebook to simultaneously record data and your observations. Now, you only need to sit back and observe your experiment.
In stock
+ −
Add to wish list
SparkFun gator:UV - micro:bit Accessory Board
US$11.13
The SparkFun gator:UV micro:bit Accessory Board is an ultraviolet sensing solution created to interface with the micro:bit as easily as possible. As part of SparkFun's gator:bit series of alligator-clippable accessories, it can be easily interfaced with the micro:bit or other microcontrollers via the SparkFun gator:bit!
In stock
+ −
Add to wish list
Panel Mount USB-B to Micro-B Cable - 6"
US$3.50
This panel mount USB-B (female) to micro-B (male) cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 28.5mm apart.
In stock
+ −
Add to wish list
Panel Mount USB Micro-B Extension Cable - 6"
US$3.50
This panel mount USB micro-B extension cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 16.5mm apart.
In stock
+ −
Add to wish list
Teensy Header Kit
US$2.10
These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield board. This kit includes five headers (two 13-pin, one 7-pin, one 3-pin, and one 2x7 right-angle SMT), enough to connect your chosen Teensy in any configuration you need!
In stock
+ −
Add to wish list
Level Translator Breakout Board - PCA9306
US$5.53
Because different parts sometimes use different voltage levels to communicate, voltage level translators can be the key to making different parts play nice. The PCA9306 is a dual bidirectional I2C-bus and SMBus voltage-level translator that's operational on the low side from 1.2V to 3.3V and on the high side from 1.8V to 5.5V. Simply apply your low and high-side reference voltages to the VREF1 and VREF2 respectively, connect your I/O and drive the Enable pin high to open bidirectional voltage translation without the use of a direction pin!
In stock
+ −
Add to wish list
Sparkfun Load Cell Amplifier - HX711
US$13.93
The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell, and with some calibration you’ll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control or simple presence detection.
In stock
+ −
Add to wish list
LED - 3W Aluminum PCB (5 Pack, Green)
US$11.83
So much power and light from such a small package. This 5 pack of green 3 Watt aluminum backed PCBs is sure to shed a lot of light on any project you add it to. These LEDs act as any other LED except these little guys require much more power while delivering a light as intense of a thousand suns going super nova (this is an exaggeration but you know what we mean)! Each LED in the pack sits upon an aluminum backed PCB to help with heat dissipation and emits a green light. Additionally, each LED requires a forward voltage of 3.2-3.8V at 750mA.
In stock
+ −
Add to wish list
LED - 3W Aluminum PCB (5 Pack, Cool White)
US$11.83
So much power and light from such a small package. This 5 pack of "Cool" white 3 Watt aluminum backed PCBs is sure to shed a lot of light on any project you add it to. These LEDs act as any other LED except these little guys require much more power while delivering a light as intense of a thousand suns going super nova (this is an exaggeration but you know what we mean)! Each LED in the pack sits upon an aluminum backed PCB to help with heat dissipation and emits a cool white light. Additionally, each LED requires a forward voltage of 3.2-3.8V at 750mA.
In stock
+ −
Add to wish list
LED - 3W Aluminum PCB (5 Pack, Warm White)
US$11.83
So much power and light from such a small package. This 5 pack of "Warm" white 3 Watt aluminum backed PCBs is sure to shed a lot of light on any project you add it to. These LEDs act as any other LED except these little guys require much more power while delivering a light as intense of a thousand suns going super nova (this is an exaggeration but you know what we mean)! Each LED in the pack sits upon an aluminum backed PCB to help with heat dissipation and emits a warm white light. Additionally, each LED requires a forward voltage of 3.2-3.8V at 750mA.
In stock
+ −
Add to wish list
Pan/Tilt Bracket Kit (Single Attachment)
US$9.73
This is an easy-to-assemble pan/tilt bracket kit that utilizes servos to move on two axes fit for camera and helping-hand applications. This particular bracket kit is the same one we use in our SparkFun Raspberry Pi Zero W Camera Kit to create a remote camera system for your home or workplace. Everything is included to get this kit assembled, even the servos (just be sure the servo motors are centered during assembly). All you will need is a small screwdriver set and a pair of clippers.
In stock
+ −
Add to wish list
Triple Output High Power RGB LED
US$6.93
So much power and light from such a small package. This 3W per channel, Triple Output High Power RGB LED is sure to shed a lot of light on any project you add it to. This LED acts as any other LED except they require much more power while delivering a light as intense of a thousand suns going super nova (this is an exaggeration but you know what we mean)! Please be aware that with all three LEDs (9W total output), you will need additional heat sinking.
Delivery within 1-2 weeks
+ −
Add to wish list
Molex Flexible GNSS Antenna - U.FL (Adhesive)
US$5.53
The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS, Galileo, BeiDou, and GLONASS in three different frequency bands (1561 +/-3MHz, 1575 +/-3MHz, 1602 +/-3MHz).
In stock
+ −
Add to wish list
SparkFun GNSS Chip Antenna Evaluation Board
US$34.93
The SparkFun GNSS Chip Antenna Evaluation Board makes it easy to test out various sized GPS antennas and geometries. Six different chip antennas have been populated on this board, each with a U.FL connector to attach your chip to the antenna! We've even v-scored the board so you can snap the six antenna's apart and just have the one you need. If you aren't picky about your antenna and/or each of the antennas work well for your applications, you will get six antennas to use in various project. Since these are GNSS antennas, they will work with GPS as well as GLONASS, Galileo, BeiDou, and other worldwide systems.
In stock
+ −
Add to wish list
SparkFun GPS Breakout - ZOE-M8Q (Qwiic)
US$62.93
The SparkFun ZOE-M8Q GPS Breakout is a high accuracy, miniaturized, GPS board that is perfect for applications that don't possess a lot of space. The on-board ZOE-M8Q is a 72-channel GNSS receiver, meaning it can receive signals from the GPS, GLONASS, BeiDou, and Galileo constellations. This increases precision and decreases lock time and thanks to the onboard rechargable battery you'll have backup power enabling the GPS to get a hot lock within seconds! Additionally, this u-blox receiver supports I2C (u-blox calls this Display Data Channel) which made it perfect for the Qwiic compatibility so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.
Delivery within 1-2 weeks
+ −
Add to wish list
SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic)
US$55.93
The SparkFun SAM-M8Q GPS Breakout is a high quality, GPS board with equally impressive configuration options. The SAM-M8Q is a 72-channel GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations. This increases precision and decreases lock time and thanks to the onboard rechargable battery, you'll have backup power enabling the GPS to get a hot lock within seconds! Additionally, this u-blox receiver supports I2C (u-blox calls this Display Data Channel) which made it perfect for the Qwiic compatibility so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.
In stock
+ −
Add to wish list
SparkFun Thing Plus - ESP32 WROOM
US$29.33
The SparkFun ESP32 Thing Plus is the next step to get started with Espressif IoT ideations while still enjoying all the amenities of the original ESP32 Thing. Espressif's ESP32 WROOM is a powerful WiFi and Bluetooth MCU module that targets a wide variety of applications. At the core of this module is the ESP32-D0WDQ6 chip which is designed to be both scalable and adaptive. To make the Thing Plus even easier to use, we've moved a few pins around to make the board Feather compatible and it utilizes our handy Qwiic Connect System which means no soldering or shields are required to connect it to the rest of your system!
In stock
+ −
Add to wish list
SparkFun ESP32 Thing Plus DMX to LED Shield
US$29.33
The SparkFun ESP32 Thing Plus DMX to LED Shield is the perfect way to send and receive DMX data. Whether it's coming in via the onboard XLR-3 jack or ArtNet, or outputting over the XLR-3 Jack/ArtNet, this shield has you covered! It's the perfect way to get started developing your own custom DMX fixtures, or even adding ArtNet capabilities to a current fixture. It also holds up to the DMX standard which requires electrical isolation between the controller and communication side to avoid ground loops.
In stock
+ −
Add to wish list
ROB-14451 SparkFun Motor Driver - Dual TB6612FNG (1A)
US$6.93
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.
In stock
+ −
Add to wish list
CAB-14163 Audio Cable TRRS - 1ft
US$2.80
This is a foot-long white audio cable that has been terminated with two TRRS connectors at each end. TRRS connectors are the 3.5mm audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra conductor for a microphone (as in hands-free headsets) or to carry a video signal (as in some MP3/MP4 players). If you’re hacking on something that has a 4-conductor audio jack, being able to plug straight in will keep your build clean and simple.
Delivery within 1-2 weeks
+ −
Add to wish list
CAB-14164 Audio Cable TRRS - 3ft
US$4.20
This is a 3-foot-long white audio cable that has been terminated with two TRRS connectors at each end. TRRS connectors are the 3.5mm audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra conductor for a microphone (as in hands-free headsets) or to carry a video signal (as in some MP3/MP4 players). If you’re hacking on something that has a 4-conductor audio jack, being able to plug straight in will keep your build clean and simple.
Delivery within 1-2 weeks
+ −
Add to wish list
WRL-14916 SparkFun Pro RF - LoRa, 915MHz (SAMD21)
US$41.93
The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board. With its fast MCU and excellent point to point data transmission in the 915MHz ISM band with LoRa Capabilities, the Pro RF is a great choice for anyone interested or experienced in utilizing long range data communication.
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8
2 - 16