Sparkfun

1 2 3 4 5 6 7 8 9
3 - 17
US$97.93

This GPS receiver is a complete GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuits. This low-cost unit outputs an astounding amount of position information 5 times a second. The receiver is based on the proven technology found in LOCOSYS 66 channel GPS SMD type receivers that use MediaTek chip solution.

In stock
+
Add to wish list

US$90.93
This credit-card sized breakout board makes it easy to plug in to a whole bunch of peripherals. Simply pop an LPC1768 mbed module into the socket and you've got access to a 128x32 graphic lcd, 5-way joystick, accelerometer, temperature sensor and more! There are headers on either side of the mbed module socket as well so you can jumper off to breadboards and other off-board components.
Delivery within 1-2 weeks
+
Add to wish list

US$90.93
This is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad Arduinos. These modems work as a serial (RX/TX) pipe, and are a great wireless replacement for serial cables. Any serial stream from 2400 to 115200bps can be passed seamlessly from your computer to your target. We've tested these units successfully over open air at 350ft (106m)!
In stock
+
Add to wish list

US$90.93
These modems work as a serial (RX/TX) pipe. Any serial stream from 2400 to 115200bps can be passed seamlessly from your computer to your target. We've tested these units successfully over open air at 350ft (106m)! The latest version of this board also breaks out PIO4.
Delivery within 1-2 weeks
+
Add to wish list

US$90.93
The SparkFun PicoBoard Starter Kit is your go-to source to begin learning everything about the SparkFun PicoBoard and the Scratch programming environment. This kit includes your very own PicoBoard, multiple pieces of hardware to get you started, and connecting components to get you hooked up. Using the Scratch programming language, you can easily create simple interactive programs based on the input from sensors. The PicoBoard incorporates a light sensor, sound sensor, a button and a slider, as well as four additional inputs that can sense electrical resistance via included cables.
In stock
+
Add to wish list

US$89.95
These crimping pliers allow you to easily make your own wiring harnesses using crimp pins and cable housings. These are not a regular set of crimp pliers. These pliers are capable of crimping very small 1.00 - 1.9mm crimp pins. These work well with JST PH, SH, SHL, and ZH series pins as well as DF14 HRS and micro-latch from Molex.
In stock
+
Add to wish list

US$88.13
The SparkPunk Sequencer is a musical control voltage sequencer designed to control the SparkPunk Sound Kit. With the pair, you can create ten-step musical motifs, but there are hidden opportunities in the sequencer: it can be modified and connected to external hardware in clever and interesting ways. It cycles among ten steps, reading the slider and switch for each, producing corresponding analog voltages on the output pins.
In stock
+
Add to wish list

US$84.95
The Qwiic Pro kit provides you with a RedBoard Turbo, two sensors, two accessory boards, and all the cables you need to start utilizing Qwiic and I2C easily. This kit was designed to allow users to get started with Arduino without the need for soldering or breadboarding. Hooking up a handful of inputs and outputs to a RedBoard has never been so easy. Use the joystick, accelerometer, or proximity sensor, and one small display for outputting text, graphics, or even a microPong game!
In stock
+
Add to wish list

US$83.93
This is a simple three track magnetic card reader with serial output from SparkFun. This reader connects to your computer with a DB9 for serial and a PS/2 for power and outputs a 9600bps 8N1 ASCII serial stream. Plug the reader into a serial port (or USB to serial converter), swipe your frequent shopper card, and you'll see the account number plain and unencrypted on the screen.
In stock
+
Add to wish list

US$83.93
This is a 'some assembly required' kit that becomes a flexible, functional and easy to use frequency generator. Just solder the through-hole parts in place, attach the face/base plates and before you know it you'll be generating sinewaves at frequencies up to 200KHz!
Delivery within 1-2 weeks
+
Add to wish list

US$83.93
The WonderBeeps board is a really simple way of adding wireless capabilities to your next project. Simply connect a standard electret mic, supply 3-5VDC and play the Beeps! The Beeps are transmitted at around 8Khz so they can be heard but they can be embedded within other sounds to make them almost unnoticed.
In stock
+
Add to wish list

US$83.93
This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pressure sensor measures the absolute pressure of the fluid around it which includes air, water, and anything else that acts like a viscous fluid.
In stock
+
Add to wish list

US$76.93
The EasyVR Shield 3.0 is a voice recognition shield for Arduino boards integrating an EasyVR module. It includes all of the features of the EasyVR module in a shield form factor that simplifies connection to the Arduino main board and PC.
In stock
+
Add to wish list

US$79.95 US$74.95
This is a simple weather station that includes an anemometer, wind vane, and rain gauge. Includes mounting hardware and RJ11 connections to the sensors. The anemometer uses a reed switch, so simple frequency detection can be used to measure wind speed. The wind vane uses a potentiometer to detect wind direction. The rain gauge acts as a switch that closes at measured increments.
In stock
+
Add to wish list

US$74.13
This OBD-II UART board allows you to interface with your car's OBD-II bus. It provides you a serial interface using the ELM327 command set and supports all major OBD-II standards such as CAN and JBUS. The board also provides a footprint which mates directly to our FTDI Basic or a Bluetooth Mate.
Delivery within 1-2 weeks
+
Add to wish list
1 2 3 4 5 6 7 8 9
3 - 17