Our Brands

Sparkfun

24 - 38
32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
Newest Items First
15 Per Page
COM-10196 EL Wire - Purple (10 ft)
COM-10196 EL Wire - Purple (10 ft)
CA$15.31
This is a 10 foot EL wire in length with a 2.3mm in diameter that glows purple and is terminated with a JST PH connector.
In stock
+ −
Add to wish list
CAB-10759 Passive PoE Cable Set
CAB-10759 Passive PoE Cable Set
CA$8.46
Each cable has a female RJ45 on one side which is adapted to a male RJ45 and 5.5x2.1mm barrel jack connector on the other side. The 'injector' cable has a female barrel jack connector and the 'splitter' cable has a male barrel jack.
In stock
+ −
Add to wish list
CAB-09741 IC Hook with Pigtail
CAB-09741 IC Hook with Pigtail
CA$9.88
This is a set of five IC hook up with pigtail connection on the other end. These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of grabbing very small points (like SOIC IC legs).
In stock
+ −
Add to wish list
CAB-10087 OBD-II to DB9 Cable
CAB-10087 OBD-II to DB9 Cable
CA$16.96
This is a cable that will allow you to access the pins on your car's OBDII connector. It has an OBDII connector on one end and a DB9 female serial connector on the other.  The overall length of the cable is 5'.
In stock
+ −
Add to wish list
CAB-10177 Panel Mount USB to 4-pin Female Header Cable - 6'
CAB-10177 Panel Mount USB to 4-pin Female Header Cable - 6'
CA$4.38
This is a 6 foot USB panel mount connector cable to a 4-pin female header connection. You might have seen these cables used in computers. They are typically used to bring USB connections from a motherboard to the external case, or the rear expansion slots. They have a 0.1" spaced 4-pin header on one end and a USB A connector on the other.
In stock
+ −
Add to wish list
COM-08184 Surface Mount Navigation Switch
COM-08184 Surface Mount Navigation Switch
CA$2.33
This is a surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down selections then select by pressing the plastic piece inwards. Capable of swtiching up to 1.2VA (360mA at 3.3V and 240mA at 5V).
In stock
+ −
Add to wish list
COM-10860 Surface Mount Right Angle Switch
COM-10860 Surface Mount Right Angle Switch
CA$1.53

A simple SMD slide switch. Perfect for when you need access to a setting or a power switch from the edge of a PCB buried deep within a project. Features: 4V - 300mA. 70mOhm resistance. 10,000 cycle life.

In stock
+ −
Add to wish list
COM-09426 Thumb Slide Joystick
COM-09426 Thumb Slide Joystick
CA$5.38
This is a resistive analog joystick, very similar to those found on the PSP1000. These compact joysticks are different in that they have a very interesting 'slide' feeling.
In stock
+ −
Add to wish list
COM-09277 Button Pad 2x2 - Breakout PCB
COM-09277 Button Pad 2x2 - Breakout PCB
CA$7.62
Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad.
In stock
+ −
Add to wish list
COM-07836 Button Pad 2x2 - Led Compatible
COM-07836 Button Pad 2x2 - Led Compatible
CA$4.54
Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display simple colors under each button. Mainly, we wanted to use our tri-color LEDs to create a full RGB color for each button.
In stock
+ −
Add to wish list
COM-08746 Button Pad 2x2 Top Bezel
COM-08746 Button Pad 2x2 Top Bezel
CA$6.08
Black 1/8" ABS plastic. We use four 4/40-0.5" size screws matched with plastic standoffs to attach the 2x2 button pad and Simon project boards. Using two of these bezels with two of the bottom bezels will create a 4x4 bezel appropriate for the full button pad.
In stock
+ −
Add to wish list
COM-08033 Button Pad 4x4 - Led Compatible
COM-08033 Button Pad 4x4 - Led Compatible
CA$15.31
This is a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad.
In stock
+ −
Add to wish list
COM-07835 Button Pad 4x4 - Led Compatible
COM-07835 Button Pad 4x4 - Led Compatible
CA$15.31
Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display simple colors under each button. Mainly, we wanted to use our tri-color LEDs to create a full RGB color for each button.
In stock
+ −
Add to wish list
COM-09339 Concave Button - Black
COM-09339 Concave Arcade Button - Black
CA$4.67
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, 'clicky' feel.
In stock
+ −
Add to wish list
COM-09338 Concave Button - Yellow
COM-09338 Concave Arcade Button - Yellow
CA$4.67
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, 'clicky' feel.
In stock
+ −
Add to wish list
24 - 38
32 33 34 35 36 37 38 39 40 41 42 43 44 45 46