Our Brands

Sparkfun

7 - 21
15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
23 - 37
Newest Items First
15 Per Page
COM-09276 Toggle Switch
COM-09276 Toggle Switch
CA$3.00
This is a heavy duty SPST toggle switch - your basic on/off toggle. Rated for 2A at 250V or 4A at 125V. Includes a face plate and two threaded nuts for mounting. Works great with our missile switch cover.
In stock
+ −
Add to wish list
COM-09852 LED - RGB Diffused Common Cathode (25 pack)
COM-09852 LED - RGB Diffused Common Cathode (25 pack)
CA$33.77

Features: 25 RGB LEDs. Standard size - T1 3/4 5mm. 2800/6500/1200 mcd brightness. 2.0V/3.2V/3.2V forward drop. Max current 20mA.

In stock
+ −
Add to wish list
COM-00528 LED - Super Bright Red
COM-00528 LED - Super Bright Red
CA$1.46
These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them.
In stock
+ −
Add to wish list
TOL-10997 6" Digital Calipers
TOL-10997 6" Digital Calipers
CA$26.08
Digital calipers are an absolute essential. Here at SparkFun we use them all the time. These premium calipers come with an extra battery and auto shut-off. Measurements can be taken in either metric or standard. The calipers are 6" in length and make a great addition to any tool set.
In stock
+ −
Add to wish list
PRT-09518 9V to Barrel Jack Adapter
PRT-09518 9V to Barrel Jack Adapter
CA$4.88
This simple cable has so many uses! Plug the 9 volt battery clip onto a standard 9V battery and connect the other end to anything with a 5.5x2.1mm, center-positive barrel jack.
In stock
+ −
Add to wish list
TOL-08734 Barrel Jack to 2-pin JST
TOL-08734 Barrel Jack to 2-pin JST
CA$5.41
Two pin JST connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively small, SMD JST connector.
In stock
+ −
Add to wish list
TOL-08964 Brass Sponge
TOL-08964 Brass Sponge
CA$5.41
This is a brass sponge that will help clean your soldering iron tip. Use it to remove residue from your iron tip before soldering. It cleans better than conventional sponges and will not damage your iron tip.
In stock
+ −
Add to wish list
CAB-09556 Bus Pirate Cable
CAB-09556 Bus Pirate Cable
CA$7.62
This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. T
In stock
+ −
Add to wish list
TOL-10219 Crimping Pliers for JST
TOL-10219 Crimping Pliers for JST
CA$98.85
These crimping pliers allow you to easily make your own wiring harnesses using crimp pins and cable housings. These are not a regular set of crimp pliers. These pliers are capable of crimping very small 1.00 - 1.9mm crimp pins. These work well with JST PH, SH, SHL, and ZH series pins as well as DF14 HRS and micro-latch from Molex.
In stock
+ −
Add to wish list
PRT-10288 DC Barrel Jack Adapter - Female
PRT-10288 DC Barrel Jack Adapter - Female
CA$4.54
This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive female barrel jack. If you have a power supply with a barrel jack and want to plug it into a breadboard, this might be the simple solution.
In stock
+ −
Add to wish list
PRT-11476 DC Barrel Jack Plug - Male
PRT-11476 DC Barrel Jack Plug - Male
CA$1.46
This jack is compatible with 5mm barrel jacks that have a 2.1mm center pole diameter. The outer shell unscrews to reveal solder terminals and a crimp strain relief. The outer shell has strain relief as well.
In stock
+ −
Add to wish list
TOL-08794 Diagonal Cutters
TOL-08794 Diagonal Cutters
CA$3.85
Mini Diagonal Cutters. These are great little cutters! A must have for clipping leads and extra solder tails. 4" long.
In stock
+ −
Add to wish list
TOL-10447 Electronic Snippers
TOL-10447 Electronic Snippers
CA$28.71
These electronic snippers are great for cutting wires and component leads. They have a cushioned handle which makes them much more comfortable to use. These pliers are great if you're looking for something a little better than hobby grade.
In stock
+ −
Add to wish list
TOL-10326 Heaterizer XL-3000 Heat Gun
TOL-10326 Heaterizer XL-3000 Heat Gun
CA$28.95
This is a handy tool that everyone should have. It's great for heat-shrink, melting things, and even very basic rework. The size is great for a lot of different applications and it heats up pretty quickly. 300 watts of heating power. 110v operation only.
In stock
+ −
Add to wish list
TOL-09316 Monocle Magnifier - Illuminated
TOL-09316 Monocle Magnifier - Illuminated
CA$15.31
When working with small parts, sometimes you need magnification and some extra light. This is a monocle we use regularly in our production facility. It has a 10x lens with a working distance of about 1-1/2".
Delivery within 2-3 weeks
+ −
Add to wish list
7 - 21
15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
23 - 37